美利体育登录入口官网

航空航天系列.白炽灯.灯、代码327.产品标准

Aerospace series - Lamps, incandescent - Lamp, code 327 - Product standard

航空航天系列.白炽灯.灯、代码337.产品标准

Aerospace series - Lamps, incandescent - Lamp, code 337 - Product standard

航空航天系列.白炽灯.灯、代码682.产品标准

Aerospace series - Lamps, incandescent - Lamp, code 682 - Product standard

航空航天系列.白炽灯.灯,代码713.产品标准

Aerospace series - Lamps, incandescent - Lamp, code 713 - Product standard

航空航天系列.白炽灯.编号为7079的灯具.产品标准

Aerospace series. Lamps, incandescent. Lamp, code 7079. Product standard

航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.强耐腐蚀性和耐流动性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - High corrosion and fluid resistance

航空航天系列 耐热合金X6NiCrTiMoV26-15（1.4980） 软化和冷加工 锻造紧固件用电线 D=15毫米 900兆帕=Rm=1100兆帕

Aerospace series. Heat resisting alloy X6NiCrTiMoV26-15 (1.4980). Softened and cold worked. Wires for forged fasteners. D = 15 mm. 900 MPa = Rm = 1 100 MPa

航空航天系列 铝合金 2017A-T42 实心铆钉用线材 D 10 mm

Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D 10 mm; German and English version EN 2116:2009

航空航天系列 钢15CrMoV6(1.7334) 空气熔炼 淬火和回火 板材和带材 2mm≤厚度≤6mm 1080MPa≤抗拉强度≤1280MPa

Aerospace series – Steel 15CrMoV6 (1.7334) – Air melted – Hardened and tempered – Sheets and strips – 2 mm ≤ a ≤ 6 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa

航空航天系列 光纤和光缆 飞机用 测试方法 第502部分：短长度光纤的拉伸强度

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres; German and English version EN 3745-502:2005 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).

航空航天系列 铝合金AL-P6082-T6或T62 板材和带材 厚度0.4mm至6mm

Aerospace series – Aluminium alloy AL-P6082-T6 or T62 – Sheet and strip – 0,4 mm ! a ! 6 mm

航空航天系列.X4CrNiMo16-5-1(1.4418)型钢.空气熔炼.淬火和回火.锻件.D<指数e>≤200mm.900MPa≤R<指数m>≤1050MPa;德文版本EN 4630-2014

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - D e <= 200 mm - 900 MPa <= R m <= 1050 MPa; German and English version EN 4630:2014

航空航天系列 连接器 电气和光学 矩形 模块化 矩形插入件 工作温度 175°C（或 125°C）连续 第001部分：技术规范

Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification; German and English version EN 4644-001:2017

航空航天系列 管端、24°内锥、外螺纹、无扩口型 超细牙螺距 英制系列 设计标准

Aerospace series - Fitting end, 24° internal cone, external thread, flareless type - Extra fine thread pitch - Inch series - Design standard; German and English version EN 6123:2016

氢燃料电池在机载应用中的注意事项

Considerations for Hydrogen Fuel Cells in Airborne Applications

航空航天系列 热轧圆钢 紧公差 直径6毫米小于等于D小于等于250毫米 尺寸

Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter 6 mm equal or less than D equal or less than 250 mm - Dimensions

Aerospace series 铝合金AL-P2618A T6或T62 包覆板和带材 0.4 mm ≤ a ≤ 6 mm

Aerospace series - Aluminium alloy AL-P2618A - T6 or T62 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm

Aerospace series 铝合金AL-P6082-T6或T62 板和带 0.4毫米≤a≤6毫米

Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm

航空航天系列 耐热合金NI-WH1302（NiCr20Co13Mo4Ti3Al） 焊接填充金属 焊丝和焊条

Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod

航空航天系列 电气和光学连接器 矩形 模块化 矩形插件 连续工作温度175°C（或125°C） 第001部分：技术规范

Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification

航空航天系列 钢 FE-PM2701(X2NiCoMo18-8-5)真空感应熔炼和真空电弧重熔 固溶处理和沉淀处理 锻件 a 或 D = 150mm 1750 MPa = Rm = 2000 MPa

Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D = 150 mm - 1 750 MPa = Rm = 2 000 MPa (Endorsed by AENOR in April of 2010.)