
点击查看大图
本部分 DIN EN 60068 展示了试验品是否能够承受由宽带随机振动引起的动态载荷,而不会在功能或其结构特性上受到超过可接受程度的影响。宽带噪声可用于识别累积的载荷影响及其导致的机械振动和特定运行程序的磨损。本规范适用于可能因运输或运行环境(例如在飞机、航天器或车辆中)而受到随机振动(噪声振动)的试验品。它主要针对未包装的试验品及其在运输容器中的包装,如...
| 术语 | |
|---|---|
| 交叉轴运动 | cross axis motion |
| 实际运动 | actual motion |
| 固定点 | fixing point |
| 控制方法 | control methods |
| 单点控制 | single point control |
| 多点控制 | multipoint control |
| 标准重力加速度 | standard value of acceleration due to gravity |
| 测量点 | measuring points |
| 检查点 | check point |
| 参考点 | reference point (single-point control) |
| 虚拟参考点 | fictitious reference point (multipoint control) |
| 响应点 | response points |
| 有效频率范围 | effective frequency range |
| 频谱加速度密度误差 | error acceleration spectral density |
| 均衡 | equalization |
| 频谱下降 | final slope |
| 滤波器带宽 | frequency resolution |
| 指示频谱加速度密度 | indicated acceleration spectral density |
| 频谱上升 | initial slope |
| 仪器误差 | instrument error |
| 随机误差 | random error |
| 记录块 | record |
| 优选测试轴 | preferred testing axes |
| 采样频率 | sampling frequency |
| 多点控制策略 | multipoint control strategies |
| 平均 | averaging |
| 极值 | extremal (maximum or minimum) |
| 峰度因子 | crest factor |
| -3dB 带宽 | -3 dB bandwidth |
| 频谱加速度密度 | acceleration spectral density |
| 频谱加速度密度控制信号 | control acceleration spectral density |
| 控制回路 | control system loop |
| 驱动信号削波 | drive signal clipping |
| 可重复性 | reproducibility |
| 有效值 | root-mean-square value |
| 标准偏差 | standard deviation |
| 统计精度 | statistical accuracy |
| 统计自由度 | statistical degrees of freedom |
| 测试频率范围 | test frequency range |
| 真实频谱加速度密度 | true acceleration spectral density |
| 振动台 无特定型号 | 用于安装试验品并进行振动测试的美利体育官网首页网址。 |
| 数字振动控制系统 无特定型号 | 用于控制振动测试信号,基于计算机基础的系统。 |
| 电动或伺服液压振动发生器 无特定型号,基于计算机基础 | 用于产生宽带随机振动的主要美利体育官网首页网址,配合控制系统使用。 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-08-08 23:28