美利体育登录入口官网

沥青和相关筑路产品的测试方法 方法 27：沉降测定

Methods of testing bitumen and related roadmaking products, Method 27: Determination of sedimentation

用于公路路面和机场跑道设计和评定的土壤与韧性路面成份的往复静态平板荷载的标准试验方法

Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

用于机场和公路路面评估和设计的土壤与挠性路面组成的往复静态平板荷载试验的标准试验方法

Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

乳化沥青的沉降和贮存稳定性的标准试验方法

Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

乳化沥青沉降和储存稳定性的标准试验方法

Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

住宅斜屋顶空间用隔热材料 第3部分：吹制纤维素纤维隔热材料规范

Thermal insulation for use in pitched roof spaces in dwellings — Part 3 : Specification for cellulose fibre thermal insulation for application by blowing

重力液体沉降法测定粒度分布 一般原则、要求和指南

Determination of particle size distribution by gravitational liquid sedimentation methods - General principles, requirements and guidance

使用重力液体沉积法测定粒度分布. 平衡法

Determination of particle size distribution by gravitational liquid sedimentation methods. Balance method

重力液体沉降法测定粒度分布- 第1部分：一般原则 要求和指导

Determination of particle size distribution by gravitational liquid sedimentation methods – Part 1: General principles, requirements and guidance

高速公路路基加宽变形剖面沉降管、沉降杯观测技术规程

Observation technical regulations for settling tubes and settling cups in widened and deformed section of expressway subgrade

保温材料 通过沉降进行老化的测定 第1部分：吹入型松散填充物

Thermal insulation products—Determination of ageing by settlement—Part 1: Blown loose fill for ventilated attics

土壤 沉降分析

Soil - Analysis of settlement

土壤.沉降分析

Soil - Analysis of settlement

涂料和清漆 沉降度的测定

Paints and varnishes - Determination of settling

建筑用隔热产品 原位形成的膨胀粘土轻骨料产品 第1部分：安装前松散填充产品的规范

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016

建筑物隔热产品 现场成型松散填充的矿物棉 (MW) 产品 第2部分：安装产品规范（草案）

Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products

建筑物隔热产品.现场成型松散填充的矿物棉(MW)产品.第2部分:安装产品规范.德文版本EN 14064-2-2010

Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products; German version EN 14064-2:2010

建筑物隔热产品 原位成型松散填充纤维素（LFCI）产品 第1部分：安装前产品规范（包括修正案 A1:2019）

Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation (includes Amendment A1:2019)

建筑物隔热产品 原位形成的松填纤维素 (LFCI) 产品 第2部分：安装的产品规格（草案）

Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products

固体生物燃料 大于 3.15 毫米的重异物含量的测定（ISO 19743:2017）

Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017)

色漆和清漆 沉降的测定（草案）

Determination of settling of paints and varnishes (draft)

色漆和清漆. 沉降的测定(ISO 21545-2018); 德文版本EN ISO 21545-2020

Paints and varnishes - Determination of settling (ISO 21545:2018); German version EN ISO 21545:2020

岩土勘察和测试 岩土结构测试 第1部分：桩测试：静压载荷测试

Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018, Corrected version 2019-03); German version EN ISO 22477-1:2018

热绝缘产品 通过沉降测定老化 第1部分: 吹入式松散填充物用于通风阁楼

Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill for ventilated attics

岩土工程勘察和试验-土壤-第4部分:实验室测试粒度分布的测定(ISO 17892-4:2016)

Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

纳米技术 MTS法测定纳米颗粒的细胞毒性

Nanotechnologies—In vitro MTS assay for measuring the cytotoxic effect of nanoparticles

纳米技术 纳米材料遗传毒性试验方法指南

Nanotechnologies—Guideline on genotoxicity test methods for nanomaterials

土壤 冻土的热印试验方法

Soils. Hot stamp test method for frozen soils

土壤.建筑物和构筑物基础应变的测量方法

Soils. Methods of measuring the strains of structures and building bases

球墨铸铁管道的抗震与抗沉降设计

Earthquake-resistant and subsidence-resistant design of ductile iron pipelines

隔热产品.通过沉降测定老化.第1部分:顶楼通风用熔断松散绝缘

Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose-fill insulation for ventilated attics

色漆和清漆.沉降的测定

Paints and varnishes - Determination of settling

铁路应用 轨道基础 铁路路基沉降变形观测评价方法

Railway applications — Track foundation — Observation and evaluation method of railway subgrade settlement and deformation

建筑变形测量规范

Code for deformation measurement of building and structure

液中重力沉降法测定粒子尺寸的分布

Determination of particle size distribution by the weight of sedimentation in liquid

建筑隔热材料 施工现场成型的轻质陶粒制品 第1部分：未成型散装制品的技术要求

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation

建筑保温材料 现场制成的散装矿棉（MW）制品 第1部分：散装制品在安装前的规范

Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation

储罐基础设计指南

Guidelines for Tank Foundation Designs

储罐基础设计指南(美制单位)

Tank Foundation Design Guide (US Customary Units)

隔热材料和制品 现场发泡轻质陶粒产品（LWA） 第一部分：安装前松散填充产品的规范

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation

建筑用隔热产品 现场发泡轻集料陶粒制品 第2部分：安装产品技术要求

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products

涂料和清漆 沉降的测定（ISO 21545:2018）

Paints and varnishes - Determination of settling (ISO 21545:2018)

由离心液相沉降法测定颗粒粒度分布 第1部分：通用原理和指南（ISO 13318-1:2001 等同采用）

Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines (ISO 13318-1:2001, IDT)

木结构 测试方法 结构地板的性能

TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING.

隔热材料和制品 原位形成的膨胀粘土轻骨料制品（LWA） 第1部分：安装前松散填充制品的规范

Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation

建筑物隔热产品 原位成型松散填充纤维素(LFCI)产品 第1部分：安装前产品规范

Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation

环境空气测量 使用 Sigma-2 被动采样器在受体表面采样大于 2.5 ?m 的大气颗粒 通过光学显微镜表征和计算沉降率和质量浓度

Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration