美利体育登录入口官网

热混合回收剂分类的标准实施规程

Standard Practice for Classifying Hot Mix Recycling Agents

烧结金属材料 规格（ISO 5755:2022）

Sintered metal material - Specifications (ISO 5755:2022)

2021 ASME 锅炉和压力容器规范 第II部分：材料 D 部分属性（习惯）

2021 ASME Boiler and Pressure Vessel Code SECTION II: MATERIALS Part D Properties (Customary)

喷涂刚性泡沫聚氨酯隔热材料的标准规格

Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

用于沥青水泥或沥青铺路混合物的水合石灰标准规范

Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

混凝土砌块规范

Specification for concrete masonry units

石灰石规格料标准规格

Standard Specification for Travertine Dimension Stone

石灰华尺寸石的标准规格

Standard Specification for Travertine Dimension Stone

石板屋顶的标准规格

Standard Specification for Roofing Slate

人行道及交通不繁忙的道路用铺面砖的标准规格

Standard Specification for Pedestrian and Light Traffic Paving Brick

砌筑水泥标准规格

Standard Specification for Masonry Cement

微孔聚氨酯材料的标准试验方法

Standard Test Methods for Microcellular Urethane Materials

氨基甲酸乙酯微孔鞋底材料的标准规格

Standard Specification for Urethane Microcellular Shoe Soling Materials

电线和电缆用一般用途,强功率,超强功率交联聚氯乙烯(CM)套管的标准规格

Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

用加热及空气压力法测定橡胶变质的标准试验方法

Standard Test Method for Rubber Deterioration by Heat and Air Pressure

空气烘箱中橡胶劣化的标准试验方法

Standard Test Method for Rubber—Deterioration in an Air Oven

柔性聚丙烯土工膜试验方法选择标准指南

Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

按钮干洗效果的标准试验方法

Standard Test Method for Effect of Drycleaning on Buttons

船舶涂层系统的抗生物污垢和物理性能的评估标准操作规程

Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

食品制备和食品加工 (食品服务) 手套的标准规范

Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

食品制备和食品处理（食品服务）手套的标准规范

Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

屋顶用喷射聚氨酯泡沫的标准规范

Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

用于屋顶应用的喷涂聚氨酯泡沫的标准规范

Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

防火材料暴露于严重环境条件的标准试验方法

Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

防火材料暴露于各种规定的增强环境因素的标准实施规程

Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors

防火材料暴露于各种规定的增强环境因素的标准实施规程

Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors

乙烯基合成地板砖的标准规范

Standard Specification for Vinyl Composition Floor Tile

垫片材料抗流体作用的标准试验方法

Standard Test Methods for Fluid Resistance of Gasket Materials

玩具安全 第1部分：机械和物理性能规范

Safety of toys — Part 1 : Specification for mechanical and physical properties

纺织玻璃.纱.试验方法和通用规范

Textile glass - Yarns - Methods of test and general specifications

鞋靴.老化调整

Footwear - Ageing conditioning

建筑石灰 测试方法

Building lime. Test methods

玩具安全 第1部分：机械和物理性能

Safety of toys - Part 1: Mechanical and physical properties

柔性与刚性蜂窝状聚合物材料 加速老化试验

Flexible and rigid cellular polymeric materials. Accelerated ageing tests

同步带传动.汽车用带.物理性能测定

Synchronous belt drives. Automotive belts. Determination of physical properties

软质聚氯乙烯夹网塑料皮

Polyvinyl Chloride Tarpaulin

儿童休闲运动鞋

Children's casual sneakers

旅游休闲鞋底

Travel and leisure soles

橡胶或塑料涂层织物 耐介质性的测定 第 1 部分：容器和容器衬里

Rubber- or plastics-coated fabrics - Determination of resistance to media - Part 1: Containers and container linings

抹灰砂浆和砌筑水泥

Masonry cement — Specifications, Control

木质板材 特征性5百分位值和特征平均值的确定 德文版 EN 1058:2024

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values; German version EN 1058:2024

纺织玻璃纤维.纱线.第2部分:试验方法和一般要求

Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998

纺织玻璃 纱线 第2部分：测试方法和一般规格

Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998

鞋靴.老化调节

Footwear - Ageing conditioning; German version EN 12749:1999

鞋类 老化调理

Footwear - Ageing conditioning; German version EN 12749:1999 / Note: To be replaced by DIN EN ISO 20870 (2016-01).

运动区域表面 通过浸入热水中加速老化的程序

Surfaces for sports areas - Procedure for accelerated ageing by immersion in hot water; German version EN 13744:2004

塑料 聚乙烯压塑板（PE-UHMW、PE-HD） 要求和测试方法（ISO/DIS 15527:2021）

Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021); German and English version prEN ISO 15527:2021

塑料 聚丙烯（PP）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).

整体(粗制)耐火材料产品 第6部分：物理性质的测量（草案）

Solid (rough) refractory products Part 6: Measurement of physical properties (draft)

软质和硬质泡沫聚合材料 加速老化试验方法（草案）

Test method for accelerated aging of soft and rigid foam polymeric materials (draft)

紧固件 热处理自攻螺钉 机械和物理性能

Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022); German version EN ISO 2702:2022

纸浆.实验室纸张.物理性能的测定(ISO 5270-2012).德文版本EN ISO 5270-2012

Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012); German version EN ISO 5270:2012

烧结金属材料 规格

Sintered metal material - Specifications (ISO 5755:2022); German version EN ISO 5755:2022

注射容器和配件 第 2 部分：注射瓶密封件 (ISO 8362-2:2015 + Amd 1:2022)（包括修正案 A1:2022）

Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015 + Amd 1:2022) (includes Amendment A1:2022)

注射容器和配件 第2部分：注射瓶密封件

Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015 + Amd 1:2022); German version EN ISO 8362-2:2015 + A1:2022

注射容器和配件 第 2 部分：注射瓶密封件 (ISO/DIS 8362-2:2023)；德语和英语版本 prEN ISO 8362-2:2023 / 注：发布日期 2023-08-25*旨在替代 DIN EN ISO 8362-2 (2022-12)

Injection containers and accessories - Part 2: Closures for injection vials (ISO/DIS 8362-2:2023); German and English version prEN ISO 8362-2:2023 / Note: Date of issue 2023-08-25*Intended as replacement for DIN EN ISO 8362-2 (2022-12).

织机用边撑刺轴技术条件

Specifications for temple barbed shafts for looms

警服材料.口袋布

Material for police uniform.Fabric for pocket

警服材料.抗静电仿毛哔叽

Material for police uniform.Antistatic wool-like serge

同步带传动.汽车同步带.物理性能试验方法

Synchronous belt drives.Automotive belts.Determination of physical properties

钛铜复合棒

Titanium-clad copper bar

电子陶瓷用氧化铝粉体材料

Alumina powders for use in electron ceramics

中小学体育器材和场地 第9部分;羽毛球拍

Sports equipment and playground for middle school & primary school Part 9:Shuttlecocks

碳化硅特种制品 反应烧结碳化硅窑具 第1部分：方梁

Special products of silicon carbide—Kiln furniture of reaction bonded silicon carbide—Part 1：Beams

镧铈铽氧化物

Lanthanum-cerium-terbium oxide

超细钴粉

Superfine cobalt powder

氧化钐

Samarium oxide

聚酯与聚烯烃双纤维绳索

Fibre ropes of polyester and polyolefin dual fibres

炼钢用LF炉精炼渣团块

Slag agglomerate of LF refining furnace for steelmaking

稀土复合钇锆陶瓷粉

Rare earth composite yttrium zirconium oxide ceramic powder

浸胶聚酯帘子布技术条件和评价方法

Dipped polyester cord fabric technical requirements and evaluation methods

纳米氮化硅

Nanoscale silicon nitride

烧结金属注射成形材料 规范

Sintered-metal injection-moulded materials—Specifications

氧化铈

Cerium oxide

核级柔性石墨板材

Nuclear grade flexible graphite sheet

超级电容器电极片物理性能测试方法

Physical Testing Methods for Supercapacitor Electrode Sheets

氮化铝陶瓷基片规范

Specification for aluminum nitride ceramic substrates

改性木材 物理性质的测定方法

Modified wood. Methods for determining physical properties

采煤综合机械化美利体育官网首页网址橡胶密封件用胶料

Rubber compound for coal-digger parts of comprehensive mechanization equipment

高密度聚乙烯（HDPE）土工膜 要求

High density polyethylene (HDPE) geomembranes. Requirements.

特殊物理性能的铸钢及合金

Cast steels and alloys with special physical properties

特殊物理性能的铸钢及合金

Cast steels and alloys with special physical properties

橡胶包包装用薄膜 第2部分:天然橡胶和改性天然橡胶

Film for wrapping rubber bales — Part 2: Natural rubber and modified natural rubber

软质和硬质泡沫聚合材料 加速老化试验

Flexible and rigid cellular polymeric materials - Accelerated ageing tests

柔性和刚性多孔聚合物材料——加速老化试验

Flexible and rigid cellular polymeric materials — Accelerated ageing tests

纸浆.实验室纸页.物理性能的测定

Pulps - Laboratory sheets - Determination of physical properties

电机用电刷材料的物理性能测定用试验程序

Test procedures for determining physical properties of brush materials for electrical machines

石墨材料的物理性能试验方法

Test methods for physical properties of graphite materials

木材面板：确定第5百分位特征值及平均特征值

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

柔性及刚性多孔聚合物材料 加速老化试验（ISO 2440:2025）

Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2025)

焊接的金属材料 技术要求（ISO 5755:2022）

Sintered metal material - Specifications (ISO 5755:2022)

家用杀虫剂产品 集装箱式蟑螂诱饵 规格（第一修订版）

HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED COCKROACH BAIT - SPECIFICATION (FIRST REVISION)

同步带传动 汽车带 物理性能的测定 (ISO 12046:1995, IDT)

SYNCHRONOUS BELT DRIVES - AUTOMOTIVE BELTS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 12046:1995, IDT)

柔性与刚性蜂窝状聚合物材料 加速老化试验

Flexible and rigid cellular polymeric materials - Accelerated ageing tests

柔性及刚性蜂窝状聚合物材料 加速老化试验

Flexible and rigid cellular polymeric materials - Accelerated ageing tests

剑麻织物 物理性能试样的选取和裁剪

Selection and cutting of sisal fabric physical properties samples

合成革用聚氨酯表面处理剂

Polyurethane finishing for synthetic leather

275°F(135℃)时性能增强的耐石油液压液的可调节填充物

Packing, Preformed, Petroleum Hydralic Fluid Resistant, Improved Performance at 275 Degrees F (135 Degrees C)

弹性体：合成橡胶（CR 或 NBR）耐低温 -40 °F 硬度计类型“A”硬度 45 至 55

Elastomer: Synthetic Rubber (CR or NBR) Low-Temperature -40 °F Resistant 45 to 55 Durometer Type 'A' Hardness

测试板 丙烯腈丁二烯（NBR-H）中 高丙烯腈含量 65 75（稳定化：2026年3月）

Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75 (Stabilized: Mar 2026)

橡胶，合成通用，耐流体 55 65

Rubber, Synthetic General Purpose, Fluid Resistant 55 - 65

橡胶：丁基（iir）低压缩永久变形和低水分/透气性 65 至 75 A 型硬度，适用于需要抵抗气体和/或水蒸汽渗透的应用

Rubber: Butyl (iir) Low Compression Set and Low Moisture/Gas Permeability 65 to 75 Type A Hardness for Applications Requiring Resistanceto Gasand/or Water Vapor Permeation

人造板 特征5%值和特征平均值的测定

Wood-based panels — Determination of characteristic 5-percentile values and characteristic mean values

柔性及刚性蜂窝状聚合物材料 加速老化试验（ISO 2440:2025 IDT）

Flexible and rigid cellular polymeric materials — Accelerated ageing tests (ISO 2440:2025, IDT)

纸浆 实验室纸张 物理性质的测定（ISO 5270:2012）

Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012)

烧结金属材料 规格（ISO 5755:2012）

Sintered metal materials - Specifications (ISO 5755:2012)

船舶和航海技术 救生美利体育官网首页网址位置指示灯 生产单元的测试、检验和标记（ISO 24408:2005 IDT）

Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units (ISO 24408:2005, IDT)

阳离子改性棉纤维

Cationic Modified Cotton Fiber

稀土异戊橡胶（NdIR）及评价方法

Isoprene rubber synthesized by rare-earth catalyst (NdIR) and evaluation procedure

薄壁注塑用塑料模内标签

Plastic in-mold label for thin-wall injection

木质板材 特征5百分位值和特征平均值的测定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

橡胶或塑料涂层织物 耐液体性的测定

Rubber- or plastic-coated fabrics - Determination of resistance to liquids

建筑石灰 第2部分：试验方法

Building lime - Part 2: Test methods

纸浆 实验室用纸 物理特性的测定（ISO 5270:2012）

Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012)

塑料软管 通用可折叠水软管，织物增强 规范（ISO 8029:2014）

Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)

木质面板 第5百分位特征值和平均特征值的测定

Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values

刚性和柔性的泡沫塑料材料 加速老化试验

Flexible and rigid cellular polymeric materials - Accelerated ageing tests

烧结金属材料 规格

Sintered metal material - Specifications

注射容器及附件 第2部分：注射瓶封盖

Injection containers and accessories - Part 2: Closures for injection vials

压力容器、管道和储罐材料与温度相关的物理特性概要

Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials

标准螺栓缩径模具用硬质合金毛坯

Hardmetal blanks used for necking dies of standard bolt

镍铬—碳化铬复合粉末

NiCr-Cr3C2composite powders

无源外科植入物 骨接合与脊柱植入物 第2部分：脊柱植入物特殊要求

Passive Surgical Implants Osteosynthesis and Spinal Implants Part 2: Special Requirements for Spinal Implants

专用输液器 第5部分：一次性使用吊瓶式和袋式输液器

Special Infusion Sets Part 5: Disposable Bottle and Bag Infusion Sets