爆破压力是内部压力增加到导致组件失效或破裂时的压力值，反映系统中最弱液压元件的极限强度，是安全评估的关键参数。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AS 2001.2.4:1990 试验 |
纺织品的试验方法.物理试验..纺织纤维破裂压力的测定.水压隔膜法 Methods of test for textiles - Physical tests - Determination of bursting pressure of textile fabrics - Hydraulic diaphragm method
|
1990-03-12 澳大利亚标准协会 |
| ASME STP-PT-005-2006 指南标准 |
DESIGN FACTOR GUIDELINES FOR HIGH PRESSURE COMPOSITE HYDROGEN TANKS
|
2006 美国机械工程师协会 |
| ASTM D1599-18(2024) 试验 |
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
|
2024-09-01 美国材料与试验协会 |
| ASTM D2464-15 Specification |
螺纹型聚氯乙烯 (PVC) 塑料管配件 (表单80) 的标准规格 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
材料分类 |
2015 美国材料与试验协会 |
| ASTM D2466-21 规范标准 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
|
2021 美国材料与试验协会 |
| ASTM D2467-15 Specification |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
|
2015 美国材料与试验协会 |
| ASTM F437-15 Specification |
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
材料要求 |
2015 美国材料与试验协会 |
| ASTM F437-21 规范标准 |
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
|
2021 美国材料与试验协会 |
| ASTM F439-11 Specification |
Schedule 80型氯化聚氯乙烯(氯乙烯)(CPVC)塑料管配件的标准规格 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
氯化聚氯乙烯 |
2011 美国材料与试验协会 |
| ASTM F439-13 Specification |
Standard Specification for Chlorinated Poly lpar;Vinyl Chloriderpar; lpar;CPVCrpar; Plastic Pipe Fittings, Schedule 80
|
2013 美国材料与试验协会 |
| ASTM F441/F441M-15 Specification |
氯化聚氯乙烯 (CPVC) 塑料管的标准规格, 表40和80 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
|
2015 美国材料与试验协会 |
| ASTM RR-F17-1038 1985 试验 |
D1599-Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
塑料管 塑料管件 |
1985 美国材料与试验协会 |
| BS 1640-3:1968(1999) 规范 |
钢制对焊管件规范 — 石油工业用 第3部分：锻制碳钢和铁素体合金钢管件 — 公制单位 Specification for Steel butt - welding pipe fittings — For the petroleum industry — Part 3 : Wrought carbon and ferritic alloy steel fittings — Metric units
冲击试验 |
1999 英国标准学会 |
| BS 5842:1980(1999) 规范 |
Specification for Thermoplastic hose assemblies for dock, road and tanker use
|
1999 英国标准学会 |
| BS EN 13293:2002 规范 |
可运输储气瓶.压缩、液化和溶解气体用的水容量高达0.5升和二氧化碳用的水容量高达１升的可再充装无缝正火碳锰钢储气瓶的设计和制造规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 li
|
2002-10-22 英国标准学会 |
| BS EN 16509:2014 |
移动式气瓶. 容量小于和等于120 ml且含有压缩气体或者液化气体的非重复充装, 运输能力小的钢瓶 (紧凑型气缸). 设计, 结构, 填充和试验. Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing
|
2014-10-31 英国标准学会 |
| BS EN 3-3:1996(1998) 规范 |
Portable fire extinguishers — Part 3 : Construction, resistance to pressure, mechanical tests
工作压力 |
1998-01-01 英国标准学会 |
| BS EN 3-8:2006(2007) 规范 |
便携式灭火器 EN 3-7 对最大允许压力等于或低于 30 巴的灭火器的结构、耐压和机械测试的附加要求 Portable fire extinguishers - Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
便携式灭火器 最大允许压力 |
2007-01-01 英国标准学会 |
| BS EN ISO 13938-1:1999 试验 |
Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension
爆破强度 |
1999-11-15 英国标准学会 |
| BS EN ISO 8028:2024 规范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
喷漆软管 |
2024-08-31 英国标准学会 |
| CAN/ULC-S511-14(2019) 试验标准 |
Built-in fire hose reels and fire hoses for municipal and industrial fire protection services
|
2019 加拿大保险商实验室 |
| DANSK DS/ISO 8028:2024 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
喷漆软管 |
2024-07-29 丹麦标准化协会 |
| DIN 20018-2:2003 规范 |
Textile-reinforced hoses - Part 2: Maximal working pressure PN 40
最大工作压力 |
2003-04 德国标准化学会 |
| DIN 20018-3:2003 规范 |
Textile-reinforced hoses - Part 3: Maximal working pressure PN 100
最大工作压力 |
2003-04 德国标准化学会 |
| DIN EN 12205:2001 规范 |
Transportable gas cylinders - Non refillable metallic gas cylinders; German version EN 12205:2001
|
2001-10 德国标准化学会 |
| DIN EN 16509 E:2012-12 规范 |
移动式气瓶 容量小于和等于120 ml且含有压缩气体或者液化气体的非重复充装, 运输能力小的钢瓶 (紧凑型气缸) 设计, 结构, 填充和试验（草案） Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
工作压力 |
2012-12 德国标准化学会 |
| DIN EN 1866-2 E:2007-02 试验 |
移动式灭火器 第2部分：符合EN 1866-1要求且最大容许压力等于或小于30 bar的灭火器的制造, 压力阻力和机械测试要求（草案） Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
|
2007-02 德国标准化学会 |
| DIN EN 1866-2:2014 规范 |
移动式灭火器. 第2部分: 符合EN 1866-1要求且最大容许压力等于或小于30 bar的灭火器的制造, 压力阻力和机械测试要求; 德文版本EN 1866-2-2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1; German ver
|
2014-07 德国标准化学会 |
| DIN EN 50089:1994 规范 |
金属外壳充气高压开关美利体育官网首页网址和控制装置用铸造树脂隔板; 德文版本 EN 50089:1992 Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear; German version EN 50089:1992
|
1994-04 德国标准化学会 |
| DIN EN ISO 11118:2016 试验 |
气瓶.非重复充装金属气瓶.规范和试验方法.德文版本EN ISO 11118-2015 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods; German version EN ISO 11118:2015
|
2016-03 德国标准化学会 |
| DIN EN ISO 13938-2:1999 试验 |
纺织品.织物胀破特性.第2部分:胀破强度和胀破力测定的气压方法 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999); German version EN ISO 13938-2:1999
|
1999-10 德国标准化学会 |
| DIN EN ISO 1402:2021 试验 |
橡胶和塑料软管和软管组件 水压试验（ISO 1402:2021）；德文版 EN ISO 1402:2021 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021); German version EN ISO 1402:2021
橡胶和塑料软管及软管组件 静水压试验 |
2021-08-00 德国标准化学会 |
| DIN EN ISO 16964 E:2020-02 试验标准 |
Gas cylinder hose assembly specifications and testing (draft)
柔性软管组件 额定压力 |
2020-02 德国标准化学会 |
| DIN EN ISO 16964:2020 试验标准 |
Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019)
柔性软管组件 |
2020-08-01 德国标准化学会 |
| DIN EN ISO 16964:2020-08 规范 |
Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019); German version EN ISO 16964:2020
柔性软管组件 |
2020-08 德国标准化学会 |
| DIN EN ISO 2758 E:2014-02 试验 |
Determination of paper brittle strength (draft)
夹紧装置 |
2014-02 德国标准化学会 |
| DIN EN ISO 2759 E:2014-02 试验 |
Determination of brittle strength of cardboard (draft)
夹紧装置 |
2014-02 德国标准化学会 |
| DIN EN ISO 7751:2011 规范标准 |
橡胶和塑料软管及软管组件.试验压力和爆破压力与最大工作压力的比值(ISO 7751-1991+修改件1-2011).德文版 EN ISO 7751-1997+ A1-2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:1991 + Amd.1:2011); German version EN ISO 7751:1997 + A1:2011
|
2011-12 德国标准化学会 |
| DIN EN ISO 7751:2017 试验标准 |
橡胶和塑料软管和软管组件 试验压力和爆破压力对设计工作压力的比值(ISO 7751-2016);德文版本EN ISO 7751-2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016); German version EN ISO 7751:2016
最大工作压力 |
2017-06 德国标准化学会 |
| DIN EN ISO 8028 E:2015-10 规范 |
Specification for rubber and/or plastic hose assemblies for vacuum spray painting (draft)
|
2015-10 德国标准化学会 |
| DIN EN ISO 8028:2024 |
无气喷漆用橡胶和/或塑料软管及软管组件 规范（ISO 8028:2024） Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
喷漆软管 |
2024-10-01 德国标准化学会 |
| DIN EN ISO 8028:2024-10 |
无气喷涂用橡胶和/或塑料软管及软管组件 规范（ISO 8028:2024） Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
喷漆软管 |
2024-10-01 德国标准化学会 |
| DIN EN ISO 9809-3:2010 规范 |
气瓶.可重复充装的无缝钢气瓶 设计、结构和试验.第3部分:正火钢瓶(ISO 9809-3-2010).德文版本EN ISO 9809-3-2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010); German version EN ISO 9809-3:2010
正火 |
2010-10 德国标准化学会 |
| DNVGL-RP-F101-2017 指南标准 |
Recommended practice for corroded pipelines
安全系数 |
2017-05 挪威船级社 |
| DVGW VP 621-2:2001-03 试验 |
气囊用于管道包覆系统 第2部分 厚壁充气袋 内置增强织物 型B Airbags for pipe wrapping systems - Part 2: Thick-walled airbags with built-in reinforcement fabric - Type B
|
2001-03 德国煤气与水工业协会 |
| EN 13293:2002 规范 |
可运输储气瓶压缩,液化和溶解气体用的水容量高达0.5升和二氧化碳用的水容量高达1升的可再充装无缝正火碳锰钢储气瓶的设计和结构规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon managanese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 l
正火 |
2002 欧洲标准化委员会 |
| GB/T 34544-2017 试验/规范 |
Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles
|
2017-10-14 国家市场监督管理总局 |
| HB 4-31-2002 规范 |
Flared Combined Conduit 1st Dimension Series (31)
|
2003-02-24 行业标准-航空 |
| HB 6979-1994 规范 |
Specification for non-flare cotton braided rubber hose
工作压力 |
1994-06-01 行业标准-航空 |
| IRAM 113067-4:2003 试验 |
Latex rubber condoms. Part 4: Determination of bursting volume and pressure
乳胶避孕套 |
2003-12-23 阿根廷标准化研究所 |
| IRAM 13438:2007 试验 |
Glass fiber reinforced - thermosetting resin pipes (GRP). Determination of circumferential tensile properties.
|
2007-12-12 阿根廷标准化研究所 |
| ISO 11118:1999 规范 |
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods
最大允许操作压力 |
1999-10 国际标准化组织 |
| ISO 13938-2:1999 试验 |
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension
爆破强度 |
1999-08 国际标准化组织 |
| ISO 14409:2011 规范 |
Ships and marine technology - Ship launching air bags
承载能力 气囊 |
2011-09 国际标准化组织 |
| ISO 4548-6:2012 试验标准 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
|
2012-09 国际标准化组织 |
| ISO 7751:2016 试验 |
橡胶和塑料软管和软管组件 试验压力和爆破压力对设计工作压力的比值 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
|
2016-11 国际标准化组织 |
| ISO 8521:2009 试验 |
塑料管道系统.玻璃增强热固塑料(GRP)管路.测定表面内周抗拉强度的试验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength
|
2009-08 国际标准化组织 |
| ISO 9809-3:2010 试验标准 |
气瓶.可重复充装的无缝钢气瓶 设计、结构和试验.第3部分:正火钢瓶 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders
|
2010-04-15 国际标准化组织 |
| JB/T 11880.3-2014 规范标准 |
柴油机 选择性催化还原(SCR)系统 第3部分:尿素溶液管路 Diesel engines.Selective catalytic reduction (SCR) systems.Part 3: Urea solution line
选择性催化还原系统 |
2014-07-09 行业标准-机械 |
| LST EN 1394+AC:2002 试验 |
塑料管道系统 玻璃纤维增强热固性塑料 (GRP) 管 表观初始环向拉伸强度的测定 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
|
2002-03-04 |
| LST EN 16509:2015 规范 |
运输气瓶 一次性小型运输用钢制气瓶 容积不超过120毫升 充装压缩或液化气体（紧凑型气瓶） 设计、制造、充装和试验 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
操作温度 |
2015-02-13 立陶宛标准局 |
| LST EN ISO 7751:2017 规范 |
橡胶和塑料管及其组件 试验压力、破裂压力和最大工作压力的比值（ISO 7751:2016） Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
试验压力 |
2017-02-28 立陶宛标准局 |
| LST EN ISO 8028:2024 |
橡胶和（或）塑料软管及其组件 用于无气喷涂 规格（ISO 8028:2024） Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
喷漆软管 |
2024-10-31 立陶宛标准局 |
| NF EN ISO 8028:2024 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
喷漆软管 |
2024-08-01 法国标准化协会 |
| NF T47-273*NF EN ISO 8028:2024 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
喷漆软管 |
2024-08-14 法国标准化协会 |
| SAE J1475-2014 试验 |
Hydraulic Hose Fitting for Marine Applications
|
2014-06-05 美国机动车工程师协会 |
| SS-EN 12807:2009 规范 |
LPG 美利体育官网首页网址和配件 可运输、可再充装液化石油气 (LPG) 钎焊钢瓶 设计和建造 LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
液化石油气气瓶 钎焊接头 |
2009 瑞典标准研究所 |
| SS-EN 13293:2002 规范 |
可运输气瓶 设计和制造规范可重复充装的运输无缝 normalized 碳锰钢液化气体、压缩气体和溶解气体气瓶 水容量不大于0.5升和至1... Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1...
正火 |
2002-12-13 瑞典标准研究所 |
| SS-EN 16509:2014 规范标准 |
可搬运气体容器 不可再充装、小型可搬运钢制容器 容量不超过和包括120毫升 内含压缩或液化气体（紧凑型容器） 设计、制造、灌装和测试 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
工作温度 |
2014 瑞典标准研究所 |
| SS-EN 1829-2:2008 |
High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
|
2008 瑞典标准研究所 |
| SS-EN ISO 13938-2:1999 试验 |
纺织品 织物顶破性能 第2部分：气压法测定顶破强度和顶破扩张度（ISO 13938-2:1999） Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999)
爆破强度 |
1999 瑞典标准研究所 |
| SS-EN ISO 7840:1995 试验 |
Small craft - Fire-resistant fuel hoses (ISO 7840:1994)
小型船舶 |
1995 瑞典标准研究所 |
| SS-EN ISO 8028:2024 |
无气喷涂用橡胶和/或塑料软管及软管组件 技术规范（ISO 8028:2024 等同采用） Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification (ISO 8028:2024, IDT)
喷漆软管 |
2024 瑞典标准研究所 |
| SS-ISO 16964:2019 规范标准 |
气瓶 柔性软管组件 规范和测试（ISO 16964:2019 IDT） Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019, IDT)
柔性软管组件 额定压力 |
2019 瑞典标准研究所 |
| TB/T 3261-2011 规范 |
Rubber hose for compressed air brake on locomotive and motor car
|
2011-05-20 行业标准-铁道 |
| UNE-EN 3-8:2007 规范 |
便携式灭火器 第8部分：EN 3-7 对最大允许压力等于或低于 30 巴的灭火器的结构、耐压和机械测试的附加要求 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
便携式灭火器 最大允许压力 |
2007-12-19 西班牙标准化协会 |
| UNE-EN ISO 16964:2020 规范标准 |
Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019)
额定压力 |
2020-11-18 西班牙标准化协会 |
| UNE-EN ISO 8028:2025 |
用于无气喷涂的橡胶和/或塑料软管及软管组件 规范 (ISO 8028:2024) Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
喷漆软管 |
2025-03-26 国际标准化组织 |
| UNI EN ISO 8028:2024 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
喷漆软管 |
2024-12-05 意大利统一标准化组织 |
| WRC 414:1996 试验 |
A New Design Criterion Based on Pressure Testing of Torispherical Heads
|
1996-1-1 美国焊接研究委员会 |
| WRC 444:1999 试验 |
Buckling Criteria for Torishperical Heads Under Internal Pressure
屈曲 |
1999-1-1 美国焊接研究委员会 |
| WRC 451:2000 试验 |
d/D ≤ 1.00 的圆柱形容器隔离喷嘴的内压设计：第 1 号报告：圆柱形容器隔离喷嘴内压设计规范规则 Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels With d/D Up To And Including 1.00: Report No. 1: Code Rules For Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels
圆柱形容器 |
2000-1-1 美国焊接研究委员会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-06-03 02:16