美利体育登录入口官网

用于减速齿轮的环和碳合金钢锻件的标准规范

Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

气瓶.可再填充焊接钢瓶.试验压力≤60ba

Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below

结构钢热轧产品 第3部分：正火/正火轧制可焊接细晶粒结构钢的交货技术条件

Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

压力用平板钢产品 第1部分：一般要求（草案）

Flat products made of steels for pressure purposes - Part 1: General requirements

可运输的气瓶.可再填充的焊接钢气瓶.设计和制造.第1部分:碳钢

Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel (includes Amendment A1:2006) English version of DIN EN 13322-1:2006-05

气瓶.可重复充装的无缝钢气瓶 设计、结构和试验.第3部分:正火钢瓶(ISO 9809-3-2010).德文版本EN ISO 9809-3-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010); German version EN ISO 9809-3:2010

结构钢制热轧产品.第3部分:正火/正火轧制可焊细粒结构钢交货技术条件;代替EN 10113-1-1993 和 EN 10113-2-1993

Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

可运输储气瓶压缩,液化和溶解气体用的水容量高达0.5升和二氧化碳用的水容量高达1升的可再充装无缝正火碳锰钢储气瓶的设计和结构规范

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon managanese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 l

钢件的正火与退火

Normalization and Annealing of Steel Parts

大型锻钢件的正火与退火

Normalizing and annealing of heavy steel forgings

储气瓶.液化石油气用可运输的可再填充焊接钢瓶.设计和建造

Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction

气瓶.可重复充装的钢制焊接气瓶.第1部分:试验压力≤60bar

Gas cylinders - Refillable welded steel cylinders - Part 1: Test pressure 60 bar and below

气瓶.可再填充焊接钢瓶.第1部分:试验压力小于等于60ba

Gas cylinders - Refillable welded steel cylinders - Part 1: Test pressure 60 bar and below

机床零件热处理技术条件.第1部分:退火、正火、调质

Technical requirement heat treatment for machine tool parts. Part 1: Annealing and normalizing or hardening and tempering

钢铁的正火和退火处理工艺(修改件1)

Process of normalizing and annealing of iron and steel (Amendment 1)

热轧结构钢产品 第3部分：可焊接细晶粒结构钢的供货技术条件 经正火化或正火轧制

Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

运输用气瓶 0.5 L 及以下容积的压缩、液化和溶解气体气瓶 以及 1 L 及以下容积的二氧化碳填充用无缝标准锰钢气瓶的设计与构造技术规范...

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1...

铁基产品 热处理 词汇 (ISO 4885:1996 修改版)

FERROUS PRODUCTS - HEAT TREATMENTS - VOCABULARY (ISO 4885:1996, MOD)

钢铸件，砂 0.80Cr 1.8Ni 0.35Mo（0.38 0.46C）（SAE 4340）

Steel@ Sand@ Castings@ 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered (UNS J24060)

焊接和冷拔、高强度低合金钢液压管，经过亚临界退火以进行弯曲和扩口

Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring

可运输气瓶 设计和制造规范可重复充装的运输无缝 normalized 碳锰钢液化气体、压缩气体和溶解气体气瓶 水容量不大于0.5升和至1...

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1...

可移动气体容器 容量不超过150升的可再充填焊接接收器 第3部分：设计依据为实验方法的焊接碳钢气瓶

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

剪刃 热处理工艺规范

Scissor blade--Process specification of heat treatment

船用热轧扁钢

Marine Hot-Rolled Flat Steel