美利体育登录入口官网

钢筋机械接头的类型

Types of Mechanical Splices for Reinforcing Bars

用于压力应用的与交联聚乙烯 (PE-X) 一起使用的机械连接配件 用于热水和冷水装置的塑料管道系统 交联聚乙烯 (PE-X) 通用（ISO 15875-1：2003 MOD）

Mechanical connection fittings for use with cross-linked polyethylene (PE-X) for pressure applications Plastic piping systems for hot and cold water installations Cross-linked polyethylene (PE-X) Universal (ISO 15875-1: 2003 MOD )

与用于压力应用的交联聚乙烯 (PE-X) 一起使用的机械连接配件 用于热水和冷水装置的塑料管道系统 交联聚乙烯 (PE-X) 系统用途的适用性（ISO 15875-5：2003 MOD)

Mechanical connection fittings for use with cross-linked polyethylene (PE-X) for pressure applications Plastic piping systems for hot and cold water installations Suitability of cross-linked polyethylene (PE-X) for system use (ISO 15875- 5:2003 MOD)

用于压力应用的与交联聚乙烯 (PE-X) 一起使用的机械连接配件 用于热水和冷水装置的塑料管道系统 交联聚乙烯 (PE-X) 合格评定指南

Mechanical connection fittings for use with cross-linked polyethylene (PE-X) for pressure applications Plastic piping systems for hot and cold water installations Cross-linked polyethylene (PE-X) Conformity assessment guide

聚乙烯管道及内管道用机械连接件规范

Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

使用铜或铝导线的电力电缆用未绝缘压接或机械连接器的安装和检验的实施规程

Code of practice for Installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors

玻璃结构设计 第3部分：平面内受载玻璃部件及其机械连接的设计

Design of glass structures. Part 3: Design of in-plane loaded glass components and their mechanical connections

用于燃气服务的交联聚乙烯 (PEX) 管道系统

Crosslinked polyethylene (PEX) piping systems for gas services

用于 U 形销的垫圈 产品等级 C

Washers for clevis pins - Product grade C

带头部和螺纹部分的 U 形销

Clevis pins with head and threaded portion

带固定锥形长度和螺纹端头的锥形销

Taper pins with thread ends and constant taper lengths

紧固件. A和B级产品的技术规格, 表面粗糙度

Fasteners - Technical specification, surface roughness for product classes A and B

带螺纹的管螺母 符合 DIN EN ISO 228-1 标准

Pipe nuts with thread according to DIN EN ISO 228-1

滚花长形螺母

Knurled nuts, high type

短型滚花螺母

Knurled nuts, low type

开槽圆螺母

Slotted round nuts

开槽圆螺母

Slotted round nuts

开槽圆螺母

Slotted round nuts

侧面带固定销孔的圆螺母

Round nuts with set pin holes in side

方螺母 产品等级C

Square nuts; product grade C

方形薄螺母 产品等级 B

Square thin nuts - Product grade B

方颈扁圆头螺栓

Cup head square neck bolts

方颈扁圆头螺栓

Cup head square neck bolts

平沉头尖螺栓

Flat countersunk head nib bolts

带短角尺的平沉头型方颈螺栓

Flat countersunk head square neck bolts with short square

紧固件 粗牙螺纹的螺钉和垫圈组件 第5部分：带 captive 锥形弹簧垫圈

Fasteners - Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer

用于带有重型夹紧套筒的螺栓的平垫圈

Plain washers for bolts with heavy clamping sleeves

十字槽螺纹切削螺钉.尺寸、要求和检验

Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing

专用基础螺母

Special foundation nuts

专用基础螺母

Special foundation nuts

特殊基础螺母

Special foundation nuts

十字槽凸起沉头木螺钉

Cross recessed raised countersunk head wood screws

热塑性材料制压力管道 聚乙烯(PE)管用金属和塑料压缩配件 通用质量要求和测试

Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing

热塑性材料制压力管道.聚乙烯(PE)管用金属和塑料压缩配件.通用质量要求和测试.德文和英文文本

Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

热塑性材料制成的压力管道 聚乙烯（PE）管道用金属和塑料压缩配件 一般质量要求和测试

Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English

紧固件.补充件3:欧洲标准.概论

Fasteners - Supplement 3: European Standards - Survey

紧固件 增补 3：欧洲标准 调查

Fasteners - Supplement 3: European Standards - Survey

紧固件 增补 3：欧洲标准 调查

Fasteners - Supplement 3: European Standards - Survey

紧固件 增补 3：欧洲标准 调查

Fasteners - Supplement 3: European Standards - Survey

紧固件 补充 3：欧洲标准 调查

Fasteners - Supplement 3: European Standards - Survey

紧固件 术语、术语拼写、缩写

Fasteners - Terminology, spelling of terms, abbreviations

紧固件.术语.术语的拼写.缩写

Fasteners - Terminology, spelling of terms, abbreviations

紧固件 术语、术语拼写、缩写

Fasteners - Terminology, spelling of terms, abbreviations

小盘开槽平头螺钉

Slotted pan head screws with small head

开槽小头盘头螺钉

Slotted pan head screws with small head

六角开槽和槽顶螺母. 第1部分: 公制粗牙和细牙螺纹, A级和B级产品

Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread, product grades A and B

六角开槽螺母 第3部分：米制粗牙螺纹 产品等级 C

Hexagon slotted nuts - Part 3: Metric coarse pitch thread, product grade C

带卡套的十字槽盘头自攻螺钉

Cross recessed pan head tapping screws with collar

塑料管系统和配件 聚丙烯（PP） 第3部分：接头

Plastics piping systems and fittings Polypropylene (PP) Part 3: Fittings

塑料管道系统用于热水和冷水 聚乙烯（PE-X）- 第3部分：配件

Plastics piping systems for hot and cold water Polyethylene (PE-X) - Part 3: Fittings

塑料管道系统 热水和冷水用聚丁烯 (PB) 第3部分：配件

Plastics piping systems - Polybutylene (PB) for hot and cold water - Part 3: Fittings

塑料管系统用于热水和冷水 氯化聚氯乙烯 (PVC-C) 第3部分：配件

Plastics piping systems for hot and cold water - Chlorinated polyvinyl chloride (PVC-C) - Part 3: Fittings

木结构.用机械紧固件进行的连接.测定强度和变形特性的一般原理.(ISO 6891-83)

Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991

长圆柱末端的槽头止动螺钉

Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992

开槽平头螺钉 产品等级A

Slotted pan head screws - Product grade A

紧固件 检验文件类型（草案）

Fastener Inspection Document Type (Draft)

紧固件.检验文件类型(ISO 16228-2017);德文版本EN ISO 16228-2018

Fasteners - Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018

开槽半沉头螺钉 产品等级A级

Slotted raised countersunk head screws (common head style) - Product grade A

石油和天然气工业.管道运输系统.机械连接器的试验过程

Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004

石油和天然气工业-管道运输系统-机械连接器的测试程序

Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004

木结构.机械紧固件接头的测试.木密度要求(ISO 8970-2010);德文版本EN ISO 8970-2010

Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010); German version EN ISO 8970:2010

木结构. 机械紧固件接头的测试. 木材密度要求(ISO 8970-2020); 德文版本EN ISO 8970-2020

Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020); German version EN ISO 8970:2020

紧固件 术语

Fasteners - Terminology

紧固件.术语(ISO 1891-2009).英文版本DIN ISO 1891-2009-09

Fasteners - Terminology (ISO 1891:2009);English version of DIN ISO 1891:2009-09

紧固件 术语

Fasteners - Terminology (ISO 1891:2009)

燃气和供水用塑料管道系统的 第B3部分：供水分系统用塑料机械接头

Plastic pipe systems for gas and water distribution - Part B3: Mechanical joints made of plastic for water distribution

塑料管道系统在燃气和水分配中的应用-第B3部分：机械接头（POM, PP）

Plastic pipe systems for gas and water distribution - Part B3: Mechanical joints from plastics (POM, PP) for the water supply

额定电压30KV(U<指数m>=36 kV)电力电缆用压接和机械连接器.第1部分:试验方法和要求

Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements

农用车辆.拖挂车辆的机械连接装置.第2部分:带座孔的连接环40.技术勘误1

Agricultural vehicles - Mechanical connections on towed vehicles - Part 2: Coupling ring 40 with socket; Technical Corrigendum 1

木结构 机械紧固件接头 强度和变形特性确定的一般原则

Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics

钢制品 混凝土钢筋用高粘性钢的终端结头或锚固装置 第1部分：机械性能要求

Steel products. End coupling or anchoring devices for high adherence steel for concrete reinforcement. Part 1 : requirements for mechanical performances.

玻璃结构设计 第3部分：受平面载荷玻璃构件及其机械连接的设计

Design of glass structures — Part 3: Design of in-plane loaded glass components and their mechanical joints

输送带 机械紧固件强度的确定 静态试验方法（ISO 1120:2012）

Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)

石油和天然气工业 管道运输系统 机械连接器的试验程序（ISO 21329:2004）

Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004)

木结构 机械紧固件连接的测试 木材密度要求（ISO 8970:2020）

Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)

塑料管及附件 交联聚乙烯（PE-X）燃气管道系统 公制系列 技术规范 第3部分：机械连接用配件（包括PE-X/金属过渡件）（ISO 14531-3:2006 等同采用）

Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, IDT)

木结构 用机械紧固件制成的接头 强度和变形特性测定的一般原则（ISO 6891:1983）

TIMBER STRUCTURES. JOINTS MADE WITH MECHANICAL FASTENERS. GENERAL PRINCIPLES FOR THE DETERMINATION OF STRENGTH AND DEFORMATION CHARACTERISTICS. (ISO 6891:1983)