美利体育登录入口官网

珠光体铸铁对氢诱发应力开裂的敏感性

Susceptibility of pearlitic cast iron to hydrogen-induced stress cracking

双相不锈钢 (DSS) 阴极充电导致氢致应力开裂 (HISC) 失效的历史

The History of Hydrogen Induced Stress Cracking (HISC) Failures Due to Cathodic Charging of Duplex Stainless Steels (DSS)

油井美利体育官网首页网址用时效硬化镍基合金

API Standard 6ACRA

螺纹成型对沉淀硬化镍基合金紧固件氢脆敏感性影响的研究

A Study of the Effect of Thread Forming on the Susceptibility of Precipitation Hardened Ni-Based Alloy Fasteners to Hydrogen Embrittlement

双相不锈钢抗氢致应力裂纹设计推荐实践

Recommended practice — DNVGL-RP-F112

氢诱发应力裂纹对双相不锈钢在高温下的敏感性

Sensitivity of duplex stainless steel to hydrogen-induced stress cracking at high temperatures

热等静压和轧制双相不锈钢环境测试

Environmental testing of hot isostatically pressed and rolled duplex stainless steels

氢诱导应力裂纹对超级双相不锈钢UNS S32760的根因失效分析

Root cause failure analysis of hydrogen induced stress cracking in super duplex stainless steel UNS S32760

高强度 UNS N08830 在氢应力裂纹试验中的表现 以模拟海底阴极保护引起的情况

Performance of High Strength UNS N08830 in Hydrogen Stress Crack Testing to Simulate Conditions Arising from Subsea Cathodic Protection

超双相微观结构对氢诱发应力裂纹敏感性的影响

Effect of super-duplex microstructure on hydrogen-induced stress cracking susceptibility

采用慢应变速率拉伸试验方法评估沉淀硬化镍基合金的氢致应力开裂抗性的三年研究计划回顾

Assessment of the Hydrogen Induced Stress Cracking Resistance of Precipitation Hardened Nickel-based Alloys using the Slow Strain Rate Tensile Test Method – Review of a Three Years Test Program

评估沉淀硬化镍基合金对氢致应力开裂的抵抗性的慢应变速率拉伸试验方法：微观结构影响研究

Slow strain rate tensile test method for evaluating the resistance of precipitation hardened nickel-base alloys to hydrogen-induced stress cracking: microstructural influence study

氢诱发应力开裂（HISC）对25Cr双相不锈钢管的影响

Effect of Hydrogen Induced Stress Cracking (HISC) on 25Cr Duplex Stainless Steel Pipe

采用慢应变速率拉伸试验方法评估沉淀硬化镍基合金的抗氢致应力开裂性能 实验参数和相关问题

Assessment of the Hydrogen Induced Stress Cracking Resistance of Precipitation Hardened Nickel-based Alloys using the Slow Strain Rate Tensile Test Method – Experimental Parameters and Related Issues

石油天然气美利体育官网首页网址用高强度镍低合金钢：阴极充电下的 ASTM A508 4N 级

High-strength Nickel Low Alloy Steels for Oil and Gas Equipment: ASTM A508 Grade 4N under cathodic charging