美利体育登录入口官网

塑料屋顶板 塑料密封板 检验

Plastic roofing felt and waterproofing sheet; testing

含矿物粘合剂灰浆的试验 第9部分：凝固灰浆 层间接缝灰浆压力强度的测定

Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint

含有矿物粘结剂的砂浆试验第9部分：床缝硬化砂浆抗压强度的测定

Testing of mortars containing mineral binders - Part 9: Determination of the compressive strength of hardened mortars in the bed joint

建筑材料和构件的耐燃性能.第16部分:防火竖井筒检验实施过程

Fire behaviour of building materials and building components - Part 16: "Brandschacht" tests

建筑结构中密封剂的测试 密封剂的相容性 第2部分：浸入化学液体后粘附/内聚性能的变化

Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids

建筑业密封材料试验.粘合和膨胀试验.第1部分:标准气候、水或高温预处理

Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures

多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性

Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials / Note: To be replaced by DIN 53428 (2022-11).

包装试验. 包装薄膜的试验方法. 第4部分: 测定塑料薄膜在液浴中的收缩性

Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath

非结合和水硬性结合混合物 第54部分：测定冻敏感性的试验方法 水硬性结合混合物的抗冻融性

Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures

建筑美利体育官网首页网址和工业装置的热绝缘产品 通过防护热板方法对热阻的测定 第1部分：从100 ℃到850 ℃的升温试验

Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 C to 850 C

绝热耐火产品.第6部分:加热作用下成型产品尺寸的永久变化量的测定

Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987); German version EN 1094-6:1998

隔热耐火制品第6部分：定型制品加热时尺寸永久变化的测定

Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987); German version EN 1094-6:1998

建筑应用隔热产品. 通过浸泡测定长期吸水性; 德文版本EN 12087-2013

Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:2013

建筑应用隔热产品 剪切性能的测定

Thermal insulating products for building applications - Determination of shear behaviour; German version EN 12090:2013

混凝土支承结构防护和维修用产品和系统.检验方法.维修用灰浆抗压强度测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998

用于保护和修复混凝土结构的产品和系统 测试方法 修复砂浆抗压强度的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998

防水用软板 抗撕裂强度的测定 第2部分：屋顶防水用塑料和橡胶板

Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing

防水用柔性片材拉伸性能的测定第2部分：屋顶防水用塑料和橡胶片材

Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12311-2:2013

防水用柔性片材接缝抗剥离性的测定第2部分：屋顶防水用塑料和橡胶片材

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2013

测试新拌混凝土 第1部分：取样和常用仪器

Testing fresh concrete - Part 1: Sampling and common apparatus

新拌混凝土试验.第2部分:坍落度试验.英文版本DIN EN 12350-2-2009-08

Testing fresh concrete - Part 2: Slump-test; English version of DIN EN 12350-2:2009-08

天然石材测试方法 抗盐结晶能力的测定

Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:2020

试验硬化混凝土 第11部分：非定向扩散混凝土抗氯化物的测定（草案）

Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion

硬化混凝土试验. 第13部分: 弹性压缩割线模量的测定; 德文版本EN 12390-13-2013

Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2013

测试硬化混凝土 第1部分：样品和模具的形状、尺寸和其他要求

Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2021

硬化混凝土试验 第2部分：强度试验用试样的制作和养护

Testing hardened concrete - Part 2: Making and curing specimens for strength tests

测试硬化混凝土 第5部分：试样的弯曲强度

Testing hardened concrete - Part 5: Flexural strength of test specimens

硬化混凝土试验 第8部分：加压水渗透深度

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

测试硬化混凝土 第8部分：压力下水的渗透深度

Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2019

沥青混合物 试验方法 第12部分：沥青样品水敏感性的测定

Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens

沥青混合物-试验方法-第19部分：样品的渗透性

Bituminous mixtures - Test methods - Part 19: Permeability of specimen; German version EN 12697-19:2020

沥青混合物.热混沥青用试验方法.第21部分:板状样品的压痕试验

Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens; German version EN 12697-21:2012

沥青混合物.热混合沥青的试验方法.第31部分:用旋转式压实机的试样制备

Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor; English version EN 12697-31:2007-06

沥青混合料 试验方法 第33部分：碾压机制备的试样

Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor

沥青混合物.热混合沥青的试验方法.第43部分:耐燃料性.德文版本EN 12697-43-2014

Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel; German version EN 12697-43:2014

塑料 - 多用途测试样本（ISO 3167:2014）

Plastics - Multipurpose test specimens (ISO 3167:2014); German version EN ISO 3167:2014

瓷砖用灰浆.第5部分:吸水率的测定

Grouts for tiles - Part 5: Determination of water absorption; English version of DIN EN 12808-5:2009-01

建筑五金 窗户和门高窗用五金 要求和试验方法 第16部分：升降窗用五金

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows

建筑五金件-门窗和门高窗五金件-第8部分：倾斜和转动、先倾斜和仅转动五金件的要求和测试方法

Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware; German version EN 13126-8:2017

测定结构构件耐火作用的试验方法.第3部分:混凝土构件应用的保护方法;德文版本EN 13381-3-2015

Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members; German version EN 13381-3:2015

确定结构构件耐火性贡献的试验方法 第7部分：木材构件的应用保护

Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members

蒸气强化加气混凝土弯曲强度测定

Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997

防水用柔性薄板 混凝土船桥甲板和其他车辆行驶的混凝土表面的防水性 粘结强度的测定（草案）

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength

非支承部件防火试验 第1部分：墙（草案）

Fire resistance tests for non-loadbearing elements - Part 1: Walls

非承重构件的耐火试验. 第3部分: 幕墙. 整体结构(完整组合); 德文版本EN 1364-3-2014

Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly); German version EN 1364-3:2014

服务设施的耐火试验. 第1部分: 通风管道; 德文版本EN 1366-1-2014

Fire resistance tests for service installations - Part 1: Ventilation ducts; German version EN 1366-1:2014

服务设施防火试验.第2部分:防火盖

Fire resistance tests on service installations - Part 2: Fire dampers; German version EN 1366-2:1999

服务设施防火试验.第2部分:防火盖;德文版本EN 1366-2:2015

Fire resistance tests for service installations - Part 2: Fire dampers; German version EN 1366-2:2015

建筑物用保温产品 周期性荷载下性能测定（草案）

Thermal insulating products for building applications - Determination of behaviour under cyclic loading

运动场表面.成角度球特性的测定.网球

Surfaces for sports areas - Determination of angled ball behaviour - Tennis; German version EN 13865:2003

热涂接缝密封胶 第7部分：接缝密封胶的功能测试

Hot applied joint sealants - Part 7: Function testing of joint sealants

自然石测试方法 硫酸二氧根作用及湿度影响下老化抵抗性的确定

Test methods for natural stone - Determination of resistance to aging under the influence of sulfate dioxide and humidity

冷涂接缝密封剂-试验方法-第5部分：耐水解性的测定

Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis; German version EN 14187-5:2019

冷用密封胶 试验方法 第6部分：浸入试验燃料和液体化学品后粘合力/粘合特性测定（草案）

Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals

冷涂接缝密封剂-试验方法-第6部分：浸入试验燃料和液体化学品后粘附/内聚性能的测定

Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals; German version EN 14187-6:2017

皮革和鞋靴材料用胶粘剂.溶液基和分散胶粘剂.鞋底定位粘性的测定

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack); German version EN 14510:2005

皮革和鞋类材料用粘合剂 溶剂型和分散型粘合剂 鞋底定位粘性（点粘性）的测定

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack); German version EN 14510:2005

建筑应用隔热产品-规定压缩载荷和温度条件下变形的测定

Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:2013

建筑用热绝缘产品. 通过部分浸入法测定短期吸水性; 德文版本EN 1609-2013

Thermal insulating products for building applications - Determination of short term water absorption by partial immersion; German version EN 1609:2013

行人门套、窗户、幕墙、格栅和百叶窗 防盗性 测定静载荷下阻力的试验方法

Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading; German version EN 1628:2021

门和百叶窗组件、可打开的窗户和建筑硬件元件的耐火性和烟雾控制测试 第1部分：门和百叶窗组件和可打开的窗户的耐火性测试（包括修正案 A1:2018）

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows (includes Amendment A1:2018)

橡胶或塑料涂覆织物.低温试验.第1部分:弯曲试验

Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997

塑料 聚氯乙烯（PVC）型材 150°C 暴露后外观的测定

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C; German version EN 478:2018

测定漆包绕组线温度指数的试验程序.（草案）

Test procedure for the determination of the temperature index of enamelled winding wires

航空航天系列.纤维增强塑料.试验方法.玻璃化转变温度的测定

Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures; German and English version EN 6032:2015

航空航天系列 纤维增强塑料 试验方法 承载强度的测定

Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength; German and English version EN 6037:2015

热收缩模制形状.第2部分:试验方法

Heat shrinkable moulded shapes - Part 2: Methods of test (IEC 62329-2:2006); German version EN 62329-2:2006

经热压处理的加气混凝土干密度测定

Determination of the dry density of autoclaved aerated concrete; German version EN 678:1993

蒸压加气混凝土抗压强度的测定

Determination of the compressive strength of autoclaved aerated concrete

蒸压加气混凝土干燥收缩率的测定

Determination of the drying shrinkage of autoclaved aerated concrete

砖石试验方法.第10部分:气孔混凝土砖石和石灰砂石含湿量测定

Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units; German version EN 772-10:1999

砖石砌块试验方法第10部分：硅酸钙和蒸压加气混凝土砌块含水量的测定

Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units; German version EN 772-10:1999

圬工品试验方法 第14部分：集料混凝土和人造石圬工品湿度变形测定（草案）

Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units

砌块产品的试验方法.第21部分粘土和硅酸钙砌块吸水性(冷水吸收)的测定;德文版本EN 772-21-2011

Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption; German version EN 772-21:2011

砖石检验方法.第7部分:砖石隔离层沸水吸水量测定

Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling water; German version EN 772-7:1998

砌体试验方法第7部分：粘土砌体防潮层单元沸水吸水率的测定德文版 EN 772-7:1998

Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling water; German version EN 772-7:1998

建筑物用隔热产品 厚度的测定

Thermal insulating products for building applications - Determination of thickness

砌体辅助部件的试验方法 - 第 6 部分：墙系材拉伸和压缩承载能力及载荷位移特性的测定（单端试验）

Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); German version EN 846-6:2012

致密定形耐火制品试验方法第10部分：加热时尺寸永久变化的测定

Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating; German version EN 993-10:2020

密实成型耐火制品的试验方法.第5部分:冷脆强度的测定

Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength; German version EN 993-5:1998

（致密）成型耐火制品的试验方法 第6部分：环境温度下断裂模量的测定

Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature

牙科学 金属材料的腐蚀试验方法（草案）

Corrosion test methods for metallic materials in dentistry (draft)

塑料.可比单点数据的获取和表示法.第1部分:模制材料(ISO 10350-1-2007+Amd 1-2014).德文版本EN ISO 10350-1-2008+A1-2014

Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007 + Amd 1:2014); German version EN ISO 10350-1:2008 + A1:2014

塑料 可比单点数据的获取和呈现 第1部分：成型材料

Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017); German version EN ISO 10350-1:2017

塑料 类似单点数据的获取和呈现 第2部分：长纤维增强塑料

Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020); German version EN ISO 10350-2:2020

瓷砖.第10部分:有釉砖湿膨胀率测量

Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995); German version EN ISO 10545-10:1997

瓷砖 第10部分：吸湿膨胀的测定

Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:2021, Corrected version 2021-09); German version EN ISO 10545-10:2021

瓷砖.第14部分:耐污染性的测定(ISO 10545-14-2015);德文版本EN ISO 10545-14-2015

Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:2015); German version EN ISO 10545-14:2015

建筑和土木工程密封剂 质量和体积变化的测定（草案）

Determination of mass and volume changes in building and civil engineering sealants (draft)

房屋建筑.密封胶.质量和体积变化的测定

Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); English version of DIN EN ISO 10563

建筑物和土木工程 密封剂 质量和体积变化的测定

Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017); German version EN ISO 10563:2017

塑料.可比较多点数据的采集和表示.第1部分:机械性能(ISO 11403-1-2014).德文版本EN ISO 11403-1-2014

Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014); German version EN ISO 11403-1:2014

塑料 可比多点数据的采集和呈现 第1部分：机械性能（ISO 11403-1:2021）；德文版 EN ISO 11403-1:2021

Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021); German version EN ISO 11403-1:2021

塑料 可比多点数据的获取和呈现 第1部分：机械性能

Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021); German version EN ISO 11403-1:2021

塑料 可比多点数据的采集和呈现 第3部分：环境对性能的影响（ISO 11403-3:2021）；德文版 EN ISO 11403-3:2021

Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021); German version EN ISO 11403-3:2021

牙科 牙膏 要求、测试方法和标记（ISO 11609:2017）

Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)

塑料非泡沫塑料密度测定方法第1部分：浸渍法、液体比重瓶法和滴定法（ISO 1183-1:2019，修订版2019-05）

Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)

建筑材料及制品的湿热性能 高温干燥法测定水分含量（ISO 12570:2000 + Amd 1:2013 + Amd 2:2018）

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000 + Amd 1:2013 + Amd 2:2018)

建筑材料及制品的湿热性能-高温干燥测定水分含量

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000 + Amd 1:2013 + Amd 2:2018); German version EN ISO 12570:2000 + A1:2013 + A2:2018

牙科学 牙科炉 第2部分：通过烧釉评估炉程序的测试方法（ISO 13078-2:2016）；德文版 EN ISO 13078-2:2016

Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze (ISO 13078-2:2016); German version EN ISO 13078-2:2016

塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验(ISO 13802-2015,修正版2016-04-01).德文版本EN ISO 13802-2015

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015

塑料 使用锥形辐射加热器和热电堆探测器进行简单的放热测试（草案）

Simple exothermic testing of plastics using radiant cone heaters and thermopile detectors (draft)

塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验(ISO 13927-2015);德文版本EN ISO 13927-2015

Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015); German version EN ISO 13927:2015

精细陶瓷（先进陶瓷、先进技术陶瓷）-陶瓷复合材料在高温下的机械性能-压缩性能的测定

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013); German version EN ISO 14544:2016

金属和合金的腐蚀 暴露于酸化盐雾、干燥和潮湿条件下的加速循环试验（ISO 16151:2018）；德文版 EN ISO 16151:2018

Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018); German version EN ISO 16151:2018

塑料 聚酰胺（草案）

Plastic polyamide (draft)

塑料 聚酰胺（PA）模塑和挤出材料 第2部分：试样的制备和性能测定（ISO 16396-2:2017）；德文版 EN ISO 16396-2:2017

Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017); German version EN ISO 16396-2:2017

建筑用绝热产品 通过浸泡测定长期吸水率（ISO 16535:2019）

Thermal insulating products for building applications - Determination of long-term water absorption by immersion (ISO 16535:2019)

建筑用绝热产品 长期扩散吸水率的测定（ISO 16536:2019）

Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)

建筑应用隔热产品 通过扩散测定长期吸水率

Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019); German version EN ISO 16536:2019

塑料管道系统.塑料管道和配件.自然风化法

Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003

皮革-耐磨性的测定-第1部分：泰伯法（ISO 17076-1:2020）

Leather - Determination of abrasion resistance - Part 1: Taber？ method (ISO 17076-1:2020)

皮革-物理和机械测试-表面涂层冷裂纹温度的测定

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017); German version EN ISO 17233:2017

塑料 聚乙烯（PE）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016

岩土工程勘察和试验.土壤的实验室试验.第6部分:圆锥下降试验(ISO 17892-6-2017);德文版本EN ISO 17892-6-2017

Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017); German version EN ISO 17892-6:2017

塑料 弯曲性能的测定（ISO 178:2019）

Plastics - Determination of flexural properties (ISO 178:2019)

软泡沫聚合材料.拉伸强度和断裂伸长率的测定

Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008); English version of DIN EN ISO 1798:2008-04

耐火制品.荷重软化温度的测定.升温示差法

Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008

塑料 丙烯腈-丁二烯-苯乙烯（ABS）成型和挤出材料 第2部分：试样的制备和性能测定（ISO 19062-2:2019）

Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019)

塑料 苯乙烯-丙烯腈（SAN）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020); German version EN ISO 19064-2:2020

塑料 甲基丙烯酸甲酯 丙烯腈 丁二烯 苯乙烯（MABS）成型和挤出材料 第2部分：试样的制备和性能测定（ISO 19066-2:2020）

Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)

塑料 甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯（MABS）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020); German version EN ISO 19066-2:2020

塑料.聚丙烯(PP)模塑和挤塑材料.第2部分:试样制备和性能测定(ISO 19069-2-2016).德文版本EN ISO 19069-2-2016

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016

绝缘材料耐低温溢出的测定 第3部分：射流释放（草案）

Determination of the resistance of insulating materials to low temperature overflow Part 3: Jet release (draft)

输送带-滚筒摩擦测试

Conveyor belts - Drum friction testing (ISO 20238:2018); German version EN ISO 20238:2019

金属材料 板材和带材 埃里克森杯突试验（草案）

Erikson Cupping Test for Metallic Materials Sheets and Strips (Draft)

金属材料. 板材和带材. 埃里克森杯突试验(ISO 20482-2013); 德文版本EN ISO 20482-2013

Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013); German version EN ISO 20482:2013

塑料 含氟聚合物分散体以及模塑和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017); German version EN ISO 20568-2:2017

塑料 测试样本

Plastics - Test specimens (ISO 20753:2018); German version EN ISO 20753:2018 / Note: To be replaced by DIN EN ISO 20753 (2022-07).

牙科 基础聚合物 第2部分：正畸基础聚合物

Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013

塑料 乙烯-醋酸乙烯酯(EVAC)成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019); German version EN ISO 21301-2:2019

塑料 聚丁烯-1(PB-1)成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21302-2:2019); German version EN ISO 21302-2:2019

塑料 聚碳酸酯（PC）成型和挤出材料 第2部分：试样的制备和性能测定（ISO 21305-2:2019）

Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)

塑料 乙烯/乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分：试样制备和性能测定（ISO 21309-2:2019）

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019)

塑料 乙烯/乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019); German version EN ISO 21309-2:2019

塑料导热系数和热扩散率的测定第4部分：激光闪光法

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017

塑料 聚苯乙烯（PS）成型和挤出材料 第2部分：测试样品的制备和性能测定

Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020); German version EN ISO 24022-2:2020

塑料.砜聚合物模制和挤出材料.第2部分:试样的制备和性能的测定(ISO 25137-2-2009);德文版本EN ISO 25137-2-2017

Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009); German version EN ISO 25137-2:2017

硬质合金 硬质合金的磨损试验（草案）

Carbide Wear Test of Carbide (Draft)

硬质合金 硬质合金的磨损测试

Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021); German version EN ISO 28080:2021

塑料.试样机械加工制备

Plastics - Preparation of test specimens by machining (ISO 2818:1994); German version EN ISO 2818:1996

塑料 通过机械加工制备试样（ISO 2818:2018）

Plastics - Preparation of test specimens by machining (ISO 2818:2018)

塑料 通过机械加工制备测试样本

Plastics - Preparation of test specimens by machining (ISO 2818:2018); German version EN ISO 2818:2019

石油和天然气工业 - 海上结构的具体要求 - 第 1 部分：海洋气象设计和操作考虑因素 (ISO 19901-1:2015)

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2015); English version EN ISO 19901-1:2015, only on CD-ROM / Note: CD-ROM

塑料 热塑性塑料试件的注模塑法 第1部分：一般原理、多用途模塑件及条形试件（草案）

Injection molding of plastic thermoplastic test pieces Part 1: General principles, multipurpose molded parts and strip test pieces (draft)

塑料 热塑性材料试样的注射成型 第5部分：用于研究各向异性的标准试样的制备（ISO 294-5:2017）

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

建筑用隔热产品 表观密度的测定（ISO/DIS 29470:2019）

Thermal insulating products for building applications - Determination of the apparent density (ISO/DIS 29470:2019); German and English version prEN ISO 29470:2019

建筑应用隔热产品-通过部分浸泡测定短期吸水率

Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion (ISO 29767:2019); German version EN ISO 29767:2019

塑料.多用途试样(ISO 3167-2014);德文版本EN ISO 3167-2014

Plastics - Multipurpose test specimens (ISO 3167:2014); German version EN ISO 3167:2014

橡胶或塑料涂层织物 物理和机械测试 通过屈曲计方法测定抗弯曲性

Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018); German version EN ISO 32100:2018

塑料 通过氧指数测定燃烧行为 第2部分：环境温度测试（草案）

Determination of combustion behavior of plastics by oxygen index Part 2: Ambient temperature test (draft)

塑料 实验室光源暴露方法 第3部分：荧光紫外灯

Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016); German version EN ISO 4892-3:2016

传送带-纺织传送带撕裂扩展阻力的测定方法

Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017); German version EN ISO 505:2017

橡胶或塑料涂层织物.耐磨性测定.第2部分:马丁代尔研磨器

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003); German version EN ISO 5470-2:2003

塑料 烟雾产生 第2部分：通过单室测试测定光密度

Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017); German version EN ISO 5659-2:2017

塑料.压缩性能的测定

Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003

塑料 压缩性能的测定

Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003

塑料管和配件.不透明度的测定

Plastics pipes and fittings - Determination of opacity (ISO 7686:2005); English version of DIN EN ISO 7686

房屋建筑.密封件.保持延伸状态时拉伸性能的测定

Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005

塑料 暴露于太阳辐射的方法 第3部分：使用集中太阳辐射强化风化（ISO 877-3:2018）

Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2018)

塑料 蠕变行为的测定 第1部分：拉伸蠕变（ISO 899-1:2017）

Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)

房屋建筑.连接产品.恒温下密封胶的粘附/粘合性能的测定(ISO 9046-2002);德文版本EN ISO 9046-2004

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004

声学. 流阻的测定. 第2部分: 交替气流法(ISO 9053-2-2020); 德文版本EN ISO 9053-2-2020

Acoustics - Determination of airflow resistance - Part 2: Alternating airflow method (ISO 9053-2:2020); German version EN ISO 9053-2:2020

热塑性塑料管.蠕变比的测定(ISO 9967-2016).德文版本EN ISO 9967-2016

Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016

热塑性塑料管 环刚度的测定

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016

高纯陶瓷 室温机械性能的测定 压缩强度的确定

Determination of mechanical properties of high purity ceramics at room temperature Determination of compressive strength

橡胶. 物理试验方法用试样的通用制备和调节程序(ISO 23529-2010)

Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2010)

橡胶 物理测试方法测试件准备和调节的一般程序（ISO 23529:2016）

Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2016)

橡胶 物理测试方法中准备和调节试件的一般程序

Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2016)

塑料 暴露于玻璃过滤太阳辐射、自然风化或实验室辐射源后颜色变化和特性变化的测定（ISO 4582:2017）

Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources (ISO 4582:2017)

塑料 暴露于玻璃过滤的太阳辐射、自然风化或实验室辐射源后颜色变化和性能变化的测定

Plastics - Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources (ISO 4582:2017)

塑料 砂轮耐磨性的测定（ISO 9352:2012）

Plastics - Determination of resistance to wear by abrasive wheels (ISO 9352:2012)

窗户、门窗和关闭装置 防入侵 基本要求与分类

Basic requirements and classification of windows, doors, windows and closing devices for protection against intrusion

隔离护套 第2部分：试验方法 (IEC 60684-2:1997)

Isolation sheaths Part 2: Test methods (IEC 60684-2:1997)

热缩模制形状 第1部分：定义和一般要求 (IEC 62329-1:2005)

Heat shrinkable moulded shapes - Part 1: Definitions and general requirements (IEC 62329-1:2005); German version EN 62329-1:2006

热缩低压和中压模制形状 第1部分：一般要求 (IEC 62677-1:2017)

Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements (IEC 62677-1:2017); German version EN IEC 62677-1:2018