在室温下对金属材料进行塑性变形以制成所需形状的工艺过程，典型应用于金属加工领域，区别于热加工的特殊成形技术。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AS 1450:2007 规范 |
Steel tubes for mechanical purposes
碳钢管 |
2007-1-1 澳大利亚标准协会 |
| ASTM A1057/A1057M-25 规范标准 |
Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
锌涂层 |
2025-12-01 美国材料与试验协会 |
| ASTM A1134/A1134M-26 规范 |
Standard Specification for Cold-Formed Welded Stainless Steel Structural Tubing in Rounds and Shapes
|
2026-04-01 美国材料与试验协会 |
| ASTM A500/A500M-13 Specification |
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
2013 美国材料与试验协会 |
| ASTM A500/A500M-20 规范标准 |
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
2020-05-15 美国材料与试验协会 |
| BS EN 10149-2:2013 规范 |
冷成型高屈服强度钢热轧制的扁平钢产品.热轧制钢的交货技术条件 Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for thermomechanically rolled steels
热机械轧制钢 高强度钢 |
2013-09-30 英国标准学会 |
| BS EN 10219-3:2020 规范 |
非合金和细晶结构钢的冷成形焊接结构空心型材.公差、尺寸和局部特性 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
|
2020-01-01 英国标准学会 |
| BS EN 10338:2025 规范标准 |
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
多相钢 扁平产品 |
2025-07-31 英国标准学会 |
| BS EN 1090-5:2017(2018) 规范 |
钢结构和铝结构的执行 第5部分：屋顶、天花板、地板和墙壁应用的冷成型铝结构元件和冷成型结构的技术要求 Execution of steel structures and aluminium structures Part 5 : Technical requirements for cold - formed structural aluminium elements and cold - formed structures for roof, ceiling, floor and wall applications
支撑元件 |
2018-01-01 英国标准学会 |
| BS EN 14638-1:2006 规范 |
可运输的气瓶.容量小于150 litres的可再充气焊接插座.用实验方法证明设计制成的焊接奥氏体不锈钢气瓶 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods
批量 |
2006-05-31 英国标准学会 |
| BS ISO 6930:2019 规范标准 |
High yield strength steel plates and wide flats for cold forming. Delivery conditions
宽扁钢 |
2019-07-31 英国标准学会 |
| DIN EN 10139:2020 规范标准 |
冷成形加工用无涂层低碳钢冷轧窄带材.技术交货条件.德文版本EN 10139-2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions; German version EN 10139:2016
钢带 |
2020 德国标准化学会 |
| DIN EN 10149-2:2013 规范 |
冷成形高屈服强度钢制热轧板材产品.第2部分:热机械轧制钢交货技术条件.德文版本EN 10149-2-2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels; German version EN 10149-2:2013
热机械轧制钢 |
2013-12 德国标准化学会 |
| DIN EN 10210-1:2016 规范标准 |
Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016
热加工 |
2016-01-01 德国标准化学会 |
| DIN EN 10210-1:2016-01 规范标准 |
Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 / Note: Date of issue 2015-12-18*Intended as replacement for DIN EN 10210-1 (2006-07).
|
2016-01 德国标准化学会 |
| DIN EN 13480-4 E:2011-07 规范 |
Metallic industrial piping - Part 4: Fabrication and installation
金属工业管道 |
2011-07 德国标准化学会 |
| DIN EN 13480-4:2002 规范 |
Metallic industrial piping - Part 4: Fabrication and installation
管段 |
2002 德国标准化学会 |
| DIN EN ISO 9717:2018 试验标准 |
金属和其他无机涂层 金属磷酸盐转化膜（ISO 9717:2017） Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
转化涂层 |
2018-02-01 德国标准化学会 |
| IRAM-IAS U 500 206-1:2023 规范 |
冷弯成型的镀锌或无镀锌钢制薄板开口截面 用于结构用途 第1部分：通用要求 Zinc coated or uncoated open cold formed steel shapes for structural purposes Part 1: General requirements.
镀锌 |
2023-06-09 阿根廷标准化研究所 |
| LST EN 10210-1:2006 规范 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
正火轧制 |
2006-06-30 |
| LST EN 10210-3:2020 规范 |
热轧空心建筑用钢型材 第3部分：高强度和耐候钢的技术供货条件 Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
|
2020-11-30 立陶宛标准局 |
| LST EN 10219-3:2020 规范 |
冷成型焊接空心结构钢 第3部分：高强钢和耐环境腐蚀钢的技术供货条件 Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
|
2020-11-30 立陶宛标准局 |
| LST EN 10225-4:2019 规范 |
可焊结构钢 用于固定式海洋结构物 技术供应条件 第4部分：冷成型焊接空心型材 Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
细晶钢 |
2019-07-31 立陶宛标准局 |
| LST EN 10338:2025 |
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
多相钢 扁平产品 |
2025-09-15 立陶宛标准局 |
| SANS 657-1:2011 规范 |
Steel tubes for non-pressure purposes — Part 1: Sections for scaffolding, general engineering and structural applications
|
2011-03-01 南非标准局 |
| SS-EN 10130+A1:1998 规范 |
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions
技术交付条件 |
1998 瑞典标准研究所 |
| SS-EN 10131:2006 试验 |
冷轧未涂覆和镀锌或锌镍电解沉积涂层低碳及高强度钢平板材料用于冷成型 尺寸和平面形状的公差 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
冷轧钢带 |
2006 瑞典标准研究所 |
| SS-EN 10139:1998 规范 |
Cold rolled uncoated mild steel narrow strip narrow strip for cold forming - Technical delivery conditions
|
1998 瑞典标准研究所 |
| SS-EN 10149-2:2013 规范 |
热轧扁平产品用高强钢（用于冷成形） 第2部分：热机械轧制钢的的技术交货条件 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
热机械轧制钢 高强度钢 |
2013 瑞典标准研究所 |
| SS-EN 10210-3:2020 规范标准 |
热轧钢材结构空心截面 第3部分：高强度和耐候钢的技术交货条件 Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
|
2020 瑞典标准研究所 |
| SS-EN 10268:2006+A1:2013 规范标准 |
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
|
2013 瑞典标准研究所 |
| SS-EN 10338:2015 规范标准 |
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
多相钢 |
2015-08-12 瑞典标准研究所 |
| SS-EN 10338:2025 |
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming — Technical delivery conditions
多相钢 扁平产品 |
2025 瑞典标准研究所 |
| UNI EN 10338:2025 |
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
多相钢 扁平产品 |
2025-09-18 意大利统一标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-06-03 02:23