美利体育登录入口官网

钢筋混凝土烟囱设计和施工标准实践的评论（ACI 307-98）

Commentary on Standard Practice for the Design and Construction of Reinforced Concrete Chimneys (ACI 307-98)

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Environmental testing - Tests - Guidance on change of temperature tests

测定单玻璃退火建筑平板玻璃对热负荷抗性的标准实施规程

Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

确定单层玻璃退火建筑平板玻璃对热负荷的阻力的标准实践

Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

硫化橡胶或热塑性橡胶 非等温条件下拉伸应力的测定

Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions

电子美利体育官网首页网址用连接器.试验和测量.第20-3部分:火灾隐患试验.试验20c:可燃性,辉光电线

Connectors for electronic equipment. Tests and measurements. Part 20-3: Fire hazard tests. Test 20c: Flammability, glow-wire

橡胶 硫化或热塑性塑料 非等温条件下拉伸应力的测定

Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal condition

航空航天系列 液压滤清器滤芯 试验方法 条件作用

Aerospace series. Hydraulic filter elements. Test methods. Conditioning

船用柴油机受热件热疲劳通用试验方法

General test method for heated parts fatigue of marine diesel engine

电机绝缘系统热应力仿真分析技术规范

Technical Specification for Thermal Stress Simulation Analysis of Motor Insulation Systems

硼硅酸盐玻璃压力美利体育官网首页网址 3.3 设计、制造和测试的一般规则

Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing

硼硅酸盐玻璃3.3制压力美利体育官网首页网址.设计、制造和检验总则

Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997

纺织品和服装.冷环境下需求热阻的确定

Textile and clothing.Determination and interpretation of cold stress when using required clothing insulation(IREQ)and local cooling effects

蓝宝石晶体缺陷图谱

Collection of metallographs on defects of sapphire crystal

工作场所物理因素测量 第7部分:高温

Measurement of Physical Agents in Workplace Part 7:Heat Stress

橡胶、硫化或热塑性 非等温条件下拉伸应力的测定

Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions

着火危险试验.第2-10部分:基于灼热/发热丝的试验方法.灼热丝美利体育官网首页网址及通用试验规程

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

火灾危险试验 - 第2-10部分：辉/热丝基测试方法 - 辉弧仪器和通用测试程序

Fire hazard testing - Part 2-10: Glowing/Hot-wire based test methods - Glow-wire apparatus and common test procedure

电气绝缘系统 热评估程序 第2部分：选择适当的测试方法对电气绝缘系统进行评估和分类

Electrical insulation systems – Procedures for thermal evaluation – Part 2: Selection of the appropriate test method for evaluation and classification of electrical insulation systems

硫化橡胶.热拉伸应力的测定

Rubber, vulcanized - Determination of stress in tension upon heating

硫化橡胶或热塑性橡胶.非等温条件下拉伸应力的测定

Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions

热环境的人机工程学 使用预测热应激计算分析和解释热应力（ISO 7933:2023）

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)

硫化橡胶 加热时拉伸应力的测定（ISO 12493:2011 IDT）

Rubber, vulcanized - Determination of stress in tension upon heating (ISO 12493:2011, IDT)

橡胶、硫化或热塑性 非等温条件下拉伸应力的测定（ISO 12493:2023, IDT）

Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions (ISO 12493:2023, IDT)

火灾危险测试 第 2-12 部分：基于发光/热线的测试方法 材料的灼热丝可燃性指数（GWFI）测试方法

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

失效分析 由热应力引起的弹性体产品的缺陷

Failure analysis of defects in elastomer products caused by thermal stress

失效分析 热应力引起的热塑性制品缺陷

Schadensanalyse - Schaeden an thermoplastischen Kunststoffprodukten durch thermische Beanspruchung

失效分析 热应力引起的热塑性制品缺陷

Schadensanalyse - Schaeden an thermoplastischen Kunststoffprodukten durch thermische Beanspruchung

损坏分析 热应力导致弹性体产品损坏

Schadensanalyse - Schaeden an Elastomerprodukten durch thermische Beanspruchung

高温边界技术最新进展的设计意义

Design Implications of Recent Advances in Elevated Temperature Bounding Techniques