| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 415-2024 试验 |
Standard Method of Test for Weight and Diameter for Carbon-Steel for Steel Wire and Welded Wire Reinforcement for Concrete
直径 |
2024-01-01 美国公路与运输员工协会 |
| AASHTO TP 138-2020 试验 |
Standard Method of Test for Weight and Diameter for Carbon-Steel for Steel Wire and Welded Wire Reinforcement for Concrete
钢绞线 |
2020 美国公路与运输员工协会 |
| ASTM D4253-16e1 试验标准 |
Standard test method for maximum index density and unit weight of soil using a shaking table
|
2016 美国材料与试验协会 |
| ASTM D4718/D4718M-15 Practice |
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
|
2015 美国材料与试验协会 |
| ASTM D4718/D4718M-15(2023) 规程 |
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
含水量 |
2023-08-01 美国材料与试验协会 |
| ASTM D4914-08 Test Method |
用试验井中砂子替代法在现场对土壤和岩石的密度和单位重量测定的标准试验方法 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
现场密度 |
2008 美国材料与试验协会 |
| ASTM D6752/D6752M-23 试验方法标准 |
用自动真空密封法测定压实沥青混合料的体积比重和密度的标准试验方法 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
|
2023-11-01 美国材料与试验协会 |
| ASTM D698-12e2 Test Method |
采用标准作用力 (12 400 ft-lbf/ft3 (600 kN-m/m3)) 测定土壤实验室压实特性的标准试验方法 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
压实 |
2012 美国材料与试验协会 |
| JIS A 1104:1976 试验标准 |
Method of Test for Unit Weight and Solid Content in Aggregate
固体含量 |
1976-01-01 日本工业标准调查会 |
| SAE AMS3795/3B-2016 规范 |
织带 机织尼龙织物 12 000 磅(53 400 N) 3.3 盎司/码(102.5 克/平方米) Webbing@ Woven Nylon Fabric 12@000 Pounds (53@400 N)@ 3.3 Ounces/ Yards (102.5 g/m)
|
2016-06-01 美国机动车工程师协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-08-12 22:26