| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 65M/T 65-2023 试验 |
Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
锌涂层 |
2023-1-1 美国公路与运输员工协会 |
| ASTM A653/A653M-25a 规范 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
烘烤硬化钢 |
2025-12-01 美国材料与试验协会 |
| ASTM C955-17 Specification |
Standard Specification for Cold-Formed Steel Structural Framing Members
|
2017 美国材料与试验协会 |
| ASTM D7396-14 Guide |
Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
|
2014 美国材料与试验协会 |
| ASTM D7396-14(2020) 指南标准 |
Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
涂漆 |
2020 美国材料与试验协会 |
| ASTM F1074-87(2012) Specification |
Standard Specification for Cleats, Welded Horn Type
|
1987 美国材料与试验协会 |
| ASTM F1665-08(2022) 规范/试验 |
与链式围栏一起使用的聚氯乙烯（PVC）和其他符合要求的有机聚合物涂层钢刺钢丝 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
|
2022-11-01 美国材料与试验协会 |
| ASTM F2408-16(2023) 规范/规程 |
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
粉末涂层 |
2023-02-01 美国材料与试验协会 |
| AWS B2.1-1-003-2002(2013) 规范 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
气体金属电弧焊 |
2013 美国焊接协会 |
| AWS B2.1-1-007-2002(2013) 规范 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
标准焊接工艺规程 钨极气体保护焊 |
2013 美国焊接协会 |
| AWS B2.1-1-011-2002(2013) 规范 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
标准焊接工艺规程 |
2013 美国焊接协会 |
| CP 89-2001 规范 |
CODE OF PRACTICE FOR Metal roofing
|
2001-1-1 新加坡标准局 |
| DIN 82341:2015-10 规范 |
Ventilation systems on ships - Mushroom ventilator cowls
|
2015-10 德国标准化学会 |
| DIN EN 13438 E:2012-02 试验标准 |
涂料和清漆 建筑用热浸镀锌或粉末镀锌钢产品用粉末有机涂层（草案） Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
粉末涂层 粉末涂料 |
2012-02 德国标准化学会 |
| NACE Paper 07245-2016 指南标准 |
GALVANIZED STEEL POLE AND LATTICE TOWER CORROSION ASSESSMENT AND CORROSION MITIGATION
|
2016 美国防腐工程师协会 |
| NACE Paper 14537-2020 试验标准 |
Study on the Corrosion of Zinc and Galvanized Steel under the Influence of Microorganisms
微生物影响腐蚀 锌 |
2020 美国防腐工程师协会 |
| PIP CVS02830-2016 规范 |
Chain Link Fence and Gates Installation Specification
门 |
2016-12-01 流程工业实践 |
| SS 186013:1980 试验 |
Anti-rust agents for vehicles - Fluids for hollowsections - Determination of effect on aluminium, copper, steel and zinc
测试板 防锈剂 |
1980 瑞典标准研究所 |
| SS 186026:2000 试验标准 |
Anti-corrosion agents for vehicles - Fluids for hollow sections - Determination of anti-corrosion efficiency on open surface
冷轧钢 |
2000 瑞典标准研究所 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-05-07 12:37