美利体育登录入口官网

硬铜和半硬铜线及带或不带保护层的架空线路用电缆 - 规范

Hard and medium-hard copper wires and cables with or without protective covering for aerial installations - Specification

弹性体和钢丝绳结构的输送带

Conveyor belting of elastomeric and steel cord construction

电梯输送带测试方法 使用光学放大器的厚度测定

Methods of testing conveyor and elevator belting - Determination of thickness of cover using an optical magnifier

电梯输送带测试方法 传送带或带状材料的粘结强度测定

Methods of testing conveyor and elevator belting - Determination of ply adhesion of conveyor belting

焊接电缆

Welding Cables

地下波纹金属结构

Buried corrugated metal structures

与独立磨损层一起使用的高固体含量、应用冷却液体的弹性防水薄膜用标准规范

Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

薄膜开关目测检验时观测条件的标准操作规程

Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

镜面光泽测量用薄膜开关覆盖层使用塑料膜样品制备的标准实施规程

Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements

预制混凝土管及附属混凝土制品 第103部分：带柔性接头的预应力非压力管道及配件规范

Precast concrete pipes and ancillary concrete products — Part 103 : Specification for prestressed non - pressure pipes and fittings with flexible joints

混凝土管和辅助混凝土制品.未加筋和加筋混凝土观察孔的规范(对BS1917-2002标准的补充)

Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)

混凝土管和辅助混凝土制品.具有软接头的预应力非压力管道和配件的规范

Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints

焊接电缆规格

Welding cable specifications

钢筋的隔离件和垫板及其规范.产品性能要求

Spacers and chairs for steel reinforcement and their specification - Product performance requirements

覆盖物.防火能力的测定

Coverings - Determination of fire protection ability

防水用柔性薄板.混凝土桥面和其他混凝土交通区域的防水用加固沥青板.定义和特性

Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics

铁路应用设施.轨道.对空气传声起作用的隔音板和相关美利体育官网首页网址.声学性能测定用试验方法.本质特征.扩散声场条件下实验室内的吸音作用

Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions

电缆.额定电压为450/750V (U0/U)及以下的低压能源电缆.一般应用电缆.电弧焊接用交联弹性覆面电缆

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Cables with crosslinked elastomeric covering for arc welding

输送带 通用纺织结构橡胶或塑料覆盖输送带规范

Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use

钢丝绳传送带.通用传送带的设计、尺寸和机械要求

Steel cord conveyor belts. Design, dimensions and mechanical requirements for conveyor belts for general

钢丝绳芯输送带 地下设施用皮带的特殊安全要求

Steel cord conveyor belts. Special safety requirements for belts for use in underground installations

地理信息 覆盖几何和函数的模式 基础知识

Geographic information. Schema for coverage geometry and functions. Fundamentals

信息技术 用于信息交换和存储的数字记录介质 120mm三层（100.0GB单面磁盘和200.0GB双面磁盘）和四层（128.0GB单边磁盘）BD可记录磁盘

Information technology. Digitally recorded media for information interchange and storage. 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk

电气装置与导线

Equipment and lead wires

地理信息 覆盖几何和功能模式 第1部分：基础 (ISO 19123-1:2023)

Geographic information – Schema for coverage geometry and functions – Part 1: Fundamentals (ISO 19123-1:2023)

地理信息 覆盖几何和功能模式 第1部分：基础知识

Geographic information – Schema for coverage geometry and functions – Part 1: Fundamentals

电铸摆件 覆盖层技术规范

Technical Specifications for Overlays of Electroformed Decorations

单面和双面柔性印刷线路板性能指南

Performance guide for single- and double-sided flexible printed wiring boards

采用薄灰浆床技术建设瓷砖和覆盖层. 第2部分: 分散胶粘剂

Execution of tilings and coverings by thin mortar bed technique - Part 2: Dispersion adhesives

商业厨房美利体育官网首页网址 洗碗美利体育官网首页网址和洗涤槽 第3部分：洗手盆的要求和测试

Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 3: Hand rinse basin, requirements and testing

散装货物用带织物层的输送机皮带 第1部分：尺寸规格、规格、标志

Conveyor belts with textile plies for bulk goods - Part 1: Dimensions, specifications, marking

散装货物用带织物层的输送机皮带 第1部分：尺寸规格、规格、标志

Conveyor belts with textile plies for bulk goods - Part 1: Dimensions, specifications, marking

用于散装货物的带织物层的输送带 第2部分：测试

Conveyor belts with textile plies for bulk goods - Part 2: Testing

用于散装货物的带纺织层的传送带. 第2部分: 试验

Conveyor belts with textile plies for bulk goods - Part 2: Testing

煤矿用织物层输送带 第1部分：地下应用的垄断带 尺寸、要求

Conveyor belts with textile plies for coalmining - Part 1: Monopoly belts for underground applications - Dimensions, requirements / Note: DIN 22109-1 (2000-07) remains valid alongside this standard until 2015-08-31.

煤矿用织物层输送带 第6部分：测试

Conveyor belts with textile plies for coalmining - Part 6: Testing

煤矿用织物层输送带 第6部分：测试

Conveyor belts with textile plies for coalmining - Part 6: Testing

金属和合金的腐蚀 电化学试验方法 用凝胶电解质测定锌和锌涂层表面电阻率的试验方法

Corrosion of metals and alloys - Electrochemical test methods - Test method for the determination of surface resistivity of zinc and zinc coatings using gel electrolytes

涂层对金属的防腐保护 术语、工艺和表面预处理

Corrosion protection of metals by coatings - terminology, processes and surface preparation

土工合成阻挡层 运河建造中用要求的特性（草案）

Geosynthetic barriers - Characteristics required for use in the construction of canals

土工合成膜 – 运河建设应用所需的性能

Geosynthetic geomembranes – properties required for application in canal construction

土工合成阻挡层.运河建造中用要求的特性.德文版本EN 13362-2013

Geosynthetic barriers - Characteristics required for use in the construction of canals; German version EN 13362:2013

土工合成材料屏障 运河建设所需的特性

Geosynthetic barriers - Characteristics required for use in the construction of canals

地板上行走噪音的实验室测量.德文版本EN 16205-2013

Laboratory measurement of walking noise on floors; German version EN 16205:2013

钢丝绳输送带 覆盖层与核心层的粘合强度试验

Bonding strength test of cover layer and core layer of steel cord conveyor belt

农业喷灌用橡胶软管（草案）

Rubber hose for agricultural sprinkler irrigation (draft)

钢丝绳芯输送带.第1部分:通用传送带的设计、尺寸和机械要求

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005); English version of DIN EN ISO 15236-1:2006-04

钢丝绳芯输送带.第1部分:通用传送带的设计、尺寸和机械要求(ISO 15236-1-2016);德文版本EN ISO 15236-1-2016

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016); German version EN ISO 15236-1:2016

地理信息 覆盖几何和函数的模式 第1部分：基础知识 (ISO 19123-1:2023)

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023); English version EN ISO 19123-1:2023

地理信息 覆盖几何和函数的模式 第1部分：基础知识 (ISO 19123-1:2023)

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023); English version EN ISO 19123-1:2023

钢丝输送带.总厚度和涂层厚度的测量方法

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009); German version EN ISO 7590:2009

钢丝绳芯输送带 绳芯与涂层粘合测试 初始测试和热处理后（ISO 7623:2022）

Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2022)

钢丝绳传送带.表面直至核心层的粘附强度试验(ISO 8094-2013).德文版本EN ISO 8094-2013

Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (ISO 8094:2013); German version EN ISO 8094:2013

钢丝绳芯输送带-覆盖层与芯层的粘合强度测试

Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (ISO 8094:2013); German version EN ISO 8094:2013

焊接和相关工艺 接头准备的推荐标准 第4部分：复合钢（草案）

Recommended standards for joint preparation for welding and related processes Part 4: Composite steels (draft)

水电水利工程覆盖层灌浆技术规范

Specification of overburden grouting for hydropower and water resources projects

钢丝绳芯输送带 覆盖层与带芯层粘合强度试验

Steel cord conveyor belts—Adhesion strength test of the cover to the core layer

挠性多层印制板规范

Flexible Multilayer Printed Board Specifications

金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法

Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings

无损美利体育登录入口官网.脉冲涡流美利体育登录入口官网方法

Non-destructive testing.Test method for pulsed eddy current testing

金属及其他无机覆盖层 金属表面的清洗和准备 第2部分：有色金属及其合金

Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 2: Non-ferrous metals and alloys

表壳体及其附件 金合金覆盖层的颜色范围和名称

Watch-cases and accessories—Colour range and designations of gold alloy coverings

管法兰用金属齿形组合垫片 第1部分：PN 系列

Grooved metal gaskets with covering layers for pipe flanges—Part 1：PN designated

烧结钕铁硼永磁体 恒定湿热试验

Constant damp heat test of sintered NdFeB permanent magnets

磁性基体上非磁性覆盖层 覆盖层厚度测量 磁性法

Non-magnetic coatings on magnetic substrates--Measurement of coating thickness-Magnetic method

非磁性导电基体金属上非导电覆盖层 覆盖层厚度测量 振幅敏感涡流法

Non-conductive coating on non-magnetic conductive metallic base material - Measurement of coating thickness - Amplitude-sensitive eddy current method

钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法

Steel cord conveyor belts.Methods for the determination of total thickness and cover thickness

输送带术语及其定义

Conveyor belts-Terms and definition

金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests

金属和氧化物覆盖层 厚度测量 显微镜法

Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method

金属和其它无机覆盖层 厚度测量方法评述

Metallic and other inorganic coatings-Review of methods of measurement of thickness

金属和其他无机覆盖层.腐蚀膏腐蚀试验(CORR试验)

Metallic and other non-organic coatings.Corrodkote corrosion test (CORR test)

普通用途钢丝绳芯输送带

Steel cord conveyor belts for general use

金属材料 金属及其他无机覆盖层的维氏和努氏显微硬度试验

Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings

橡胶织物的传送带 技术条件

Rubber-fabric conveyer belts. Specifications

工业建筑用钢筋混凝土屋面板. 规格

Reinforced concrete roofings slabs for industrial buildings. Specifications

气体分配系统 用于钢管的挤出聚乙烯涂层 一般技术要求

Gas distribution systems. Coatings with extruded polyethylene for steel pipes. General technical requirements

雨水排水井观测口盖及雨水井盖 技术条件

Аccess manhole covers and storm-flow receivers for manholes. Specifications

统一的防腐蚀和防老化系统 金属和非金属无机涂料 术语和定义

Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions

液压绝缘弹性沥青基材料和屋顶.颗粒到涂层吸附测定方法

Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of granules to coating layer adhesion

额定电压450/750 V及以下的橡胶绝缘电缆.电弧焊电极电缆

Rubber insulated cables of rated voltages up to and including 450/750 V. Arc welding electrode cables

输送带 封面分类

Conveyor belts. Classification of covers

钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法

Steel cord conveyor belts. Methods for the determination of total thickness and covers thickness

钢丝及其制品 有机涂料 PE包覆线

Steel wire and products thereof. Organic coatings. PE coated wire

双层钢板覆盖建筑物 并采用聚氨酯泡沫隔热材料 规格

Metal-faced roof panels for industrial buildings with polyurethane foam thermal insulation. Specifications

钢制管法兰用具有覆盖层的齿形组合垫(PN系列)

Covered serrated metal gaskets for use with steel pipe flanges(PN designated)

钢制管法兰用具有覆盖层的齿形组合垫(Class系列)

Covered serrated metal gaskets for use with steel pipe flanges(Class designated)

耐寒输送带

Cold resistant conveyor belt

耐油输送带

Oil resistant conveyor belt

印制板和其他互连结构用材料 第3-3部分:包层和非包层非增强基材(用于挠性印制板)的分规范集 粘着的涂覆挠性聚酯薄膜

Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film

印制板和其他互连结构用材料 第3-4部分:包被和非包被非增强基材(用于挠性印制板)的分规范集 粘着的涂覆挠性聚酰亚胺薄膜

Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film

单面和双面柔性印制布线电路板的性能指南

Performance guide for single- and double-sided flexible printed wiring boards

挠性印制板的鉴定及性能规范

Qualification and performance specifications for flexible printed circuit boards

Tectos：要素或功能层级的定义与分析

Techos. Definitions and Analysis of Functional Elements or Layers.

建筑构件的火灾反应 暴露于外部火焰屋顶的火焰传播试验

Fire performance of building elements. Test method of spread of fire for external fire exposure to roofs.

输送带 通用型纺织结构橡胶或塑料覆面输送带规范

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use

输送带.地下开采用橡胶或塑罩纺织结构输送带规范

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

耐热涂胶输送带.涂胶耐热性.试验方法和要求

Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods

织物芯输送带.总皮带厚度和结构元件厚度.试验方法

Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods

传送带.总厚度和盖板厚度公差

Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods

钢丝绳输送带.总厚度及覆盖层厚度的测定方法

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness

气象仪器防盐雾、防潮湿、防霉菌 工艺技术要求

Proventing salt mist, moisture and mould for meteorological instrument.Technological requirement

丝包和聚酯包电阻线

Silk and polyester fiber covered wires for electrical resistance use

单面和双面柔性印制电路板

Flexible printed wiring boards -- Single-sided, Double-sided

地板设计与施工标准

Construction Norms and Rules: Flooring

温室 设计与建造 第1部分：商业化生产温室

Greenhouses - Design and construction - Part 1: Commercial production greenhouses

土方工程 第一部分 原则与通用规则

Earthworks - Part 1: Principles and general rules

某些类型绕组的电线技术规范 0-10 部分 通用要求 聚酯和玻璃纤维包绕的镀层、未涂漆或经树脂或漆浸渍的绝缘或非绝缘圆形铜线

Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-10:2017)

若干类型漆包线技术规范 第0-6部分：总要求 玻璃纤维包绕、树脂或清漆浸渍的非绝缘或漆包圆铜线（IEC 60317-0-6:2020）

Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2020)

部分类型绕组线的技术要求 第27-4部分：纸带包绕矩形铝线 (IEC 60317-27-4:2020)

Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire (IEC 60317-27-4:2020)

输送带 通用橡胶或塑料覆盖的纺织品输送带结构技术要求（ISO 14890:2013）

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)

带有钢芯的输送带 第1部分：通用输送带的结构设计、尺寸和机械要求（ISO 15236-1:2016）

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)

地理信息 覆盖几何与函数模式 第1部分：基本原理 (ISO 19123-1:2023)

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)

钢丝绳输送带 总厚度和覆盖层厚度的测定方法 (ISO 7590:2018)

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018)

煤矿用钢丝绳芯阻燃输送带

Steel cord fire resistant conveyor belting for coalmine

煤矿用织物叠层阻燃输送带

Textile laminated fire resistant conveyor belting for coalmine

煤矿用织物整芯阻燃输送带

Solid woven fire resistant conveyor belting for coalmine

承压美利体育官网首页网址无损美利体育登录入口官网.第13部分:脉冲涡流美利体育登录入口官网

Nondestructive testing of pressure equipments.Part 13: Pulsed eddy current testing

温室 - 计算和建造 - 第 1 部分：生产温室

Greenhouses - Calculation and construction - Part 1: production greenhouses

地理信息 覆盖几何和功能模式 第1部分:基础

Geographic information - Schema for coverage geometry and functions - Part 1 : fundamentals

地理信息 覆盖几何和功能模式 第1部分:基础

Geographic information - Schema for coverage geometry and functions - Part 1 : fundamentals

首饰 金 银覆盖层厚度的测定 X射线荧光光谱法

Jewellery Measurement of gold and silver coating tickness X-ray fluorescence spectrometric methods

灯具电镀、化学覆盖层

The electroplated and chemical coatings for luminaires

印制电路用挠性基材物理性能测试方法

Physical performance test method for flexible printed circuit materials

温室 设计和建造 第一部分：商业生产温室

Greenhouses - Design and construction - Part 1: Commercial production greenhouses

预制混凝土产品的通用规则

Common rules for precast concrete products

铁路申请 轨道 作用于空气传播噪声屏障及相关美利体育官网首页网址 非声学性能 第3部分：通用安全和环境要求

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements

地理信息 覆盖几何和功能模式 第1部分：基。↖SO 19123-1:2023）

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)

带织物芯的传送带 带总厚度和组成元件厚度 试验方法（ISO 583:2007）

Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007)

织物芯输送带 带总厚度和组成元件厚度 试验方法

Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2023)

钢丝绳输送带 总厚度和覆盖层厚度的测定方法（ISO 7590:2009）

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)

隧道用轻型钢丝绳芯输送带

Light steel cord conveyor belt for tunnel

耐灼烧金属网芯输送带

Burn-resistant metal mesh conveyor belt

芳纶输送带

Aramid conveyer belt

钢丝绳芯输送带 第3部分：地下设施用输送带的特殊安全要求

Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017) (Endorsed by Asociación Espa?ola de Normalización in May of 2017.)

地理信息 覆盖几何和函数的模式 第1部分：基础知识 (ISO 19123-1:2023)

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)

纺织带芯输送带 总厚度和构成元件厚度 测定方法

Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007)

地理信息 覆盖几何和功能模式 第1部分：基础

Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals

炮弹、火箭弹、导弹、引信、火工品零件覆盖层的厚度测定方法

Method for measuring the thickness of the covering layer of shells, rockets, missiles, fuzes, and pyrotechnic parts