在20°C、剪切速率为100 s??条件下的粘度值(单位毫帕秒),反映胶乳在流动时内部摩擦力的表现形式。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 366-2018 试验标准 |
Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer
旋转粘度计 |
2018 美国公路与运输员工协会 |
| AS/NZS 1580.214.5:1997(R2013) 试验 |
Paints and related materials - Methods of test - Consistency - Rotational viscometer
旋转粘度计 牛顿流体 |
2013 澳大利亚/新西兰标准 |
| AS/NZS 2341.13:1997 试验 |
沥青和相关筑路产品的测试方法方法 13:长期暴露在热和空气中 Methods of Testing Bitumen and Related Roadmaking Products Method 13: Long-Term Exposure to Heat and Air
|
1997-08-05 澳大利亚/新西兰标准 |
| AS/NZS 2341.5:1997 试验 |
沥青及相关筑路产品的测试方法方法 5:“壳”滑板微粘度计测定表观粘度 Methods of Testing Bitumen and Related Roadmaking Products Method 5: Determination of Apparent Viscosity by 'Shell' Sliding Plate Micro-Viscometer
|
1997-06-05 澳大利亚/新西兰标准 |
| AS/NZS 2341.5:1997(R2013) 试验 |
沥青及相关筑路产品的测试方法方法 5:“壳”滑板微粘度计测定表观粘度 Methods of Testing Bitumen and Related Roadmaking Products Method 5: Determination of Apparent Viscosity by 'Shell' Sliding Plate Micro-Viscometer
|
2013 澳大利亚/新西兰标准 |
| ASTM D1092-11 Test Method |
Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
毛细管 |
2011 美国材料与试验协会 |
| ASTM D1092-12 Test Method |
Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
|
2012 美国材料与试验协会 |
| ASTM D1092-12(2017) Test Method |
Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
剪切速率 毛细管 |
2012 美国材料与试验协会 |
| ASTM D1986-14 Test Method |
Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
|
2014 美国材料与试验协会 |
| ASTM D2171/D2171M-18 试验标准 |
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
真空毛细管粘度计 |
2018-12-15 美国材料与试验协会 |
| ASTM D2196-05 Test Method |
用旋转(布鲁克菲尔德)粘度计测定非牛顿材料流变性能的标准试验方法 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
|
2005 美国材料与试验协会 |
| ASTM D2196-10 Test Method |
转动粘度计(Brookfield型)法测定非牛顿材料的流变性质的标准试验方法 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
|
2010 美国材料与试验协会 |
| ASTM D2556-14 Test Method |
Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
旋转粘度计 |
2014 美国材料与试验协会 |
| ASTM D2556-14(2018) 试验标准 |
使用旋转粘度计具有剪切速率依赖性流动性的粘合剂的表观粘度的标准测试方法 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
旋转粘度计 |
2018-11-01 美国材料与试验协会 |
| ASTM D2669-06(2012)e1 Test Method |
Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
熔体 |
2006 美国材料与试验协会 |
| ASTM D2669-16 Test Method |
Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
石油蜡 |
2016 美国材料与试验协会 |
| ASTM D2669-25 试验标准 |
Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
热熔胶 石油蜡 |
2025-07-01 美国材料与试验协会 |
| ASTM D3236-15 Test Method |
Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
热熔胶 |
2015 美国材料与试验协会 |
| ASTM D3236-15(2021) 试验 |
Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
热熔胶粘剂 |
2021-01-01 美国材料与试验协会 |
| ASTM D3829-02 Test Method |
Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
屈服应力 |
2002 美国材料与试验协会 |
| ASTM D4040-10(2025) 试验标准 |
Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
|
2025-06-01 美国材料与试验协会 |
| ASTM D4402-06 Test Method |
Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
旋转粘度计 |
2006 美国材料与试验协会 |
| ASTM D4402/D4402M-15 Test Method |
Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
旋转粘度计 |
2015 美国材料与试验协会 |
| ASTM D4957-08 Test Method |
用真空毛细管粘度计测定沥青乳液残余物和非牛顿沥青表观粘度的试验方法 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
牛顿液体 |
2008 美国材料与试验协会 |
| ASTM D4957-18 试验标准 |
用真空毛细管粘度计测定沥青乳化液残留物和非牛顿沥青表观粘度的标准试验方法 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
|
2018-01-15 美国材料与试验协会 |
| ASTM D5133-05(2011) Test Method |
用温度扫描技术测定润滑油与低温的关系,润滑油与低切变率的关系,润滑油与粘度的关系,润滑油与温度的关系的标准试验方法 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
|
2005 美国材料与试验协会 |
| ASTM D5133-15 Test Method |
使用温度扫描技术的低温 低剪切速率 粘度/温度对润滑油的依赖性的标准测试方法 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
发动机油 |
2015 美国材料与试验协会 |
| ASTM D5133-20a 试验 |
使用温度扫描技术的低温 低剪切速率 粘度/温度对润滑油的依赖性的标准测试方法 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
|
2020-06-01 美国材料与试验协会 |
| ASTM D5293-25 试验标准 |
使用冷启动模拟器测定发动机油及基础油在 10?°C至 35?°C之间表观粘度的标准试验方法 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10?°C and –35?°C Using Cold-Cranking Simulator
发动机油 |
2025-12-16 美国材料与试验协会 |
| ASTM D5422-25 试验标准 |
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
|
2025-07-01 美国材料与试验协会 |
| ASTM D5481-13 Test Method |
用多孔毛细管粘度计在高温高剪切率下测量表面粘性的标准试验方法 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
剪切速率 |
2013 美国材料与试验协会 |
| ASTM D6114/D6114M-09 Specification |
Standard Specification for Asphalt-Rubber Binder
|
2009 美国材料与试验协会 |
| ASTM D6267/D6267M-13(2017) Test Method |
Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
旋转粘度计 |
2013 美国材料与试验协会 |
| ASTM D6821-02e1 Test Method |
Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
屈服应力 |
2002 美国材料与试验协会 |
| ASTM D6896-03(2007) Test Method |
Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
屈服点 |
2003 美国材料与试验协会 |
| ASTM D6896-25 试验标准 |
Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
屈服应力 |
2025-11-01 美国材料与试验协会 |
| ASTM D7110-15 Test Method |
Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
发动机油 |
2015 美国材料与试验协会 |
| ASTM D7110-21 试验标准 |
用于确定低温下使用和含烟灰的发动机油的粘度 - 温度关系的标准测试方法 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
发动机油 |
2021 美国材料与试验协会 |
| ASTM D7867-13(2020) 试验方法 |
用于测量作为温度函数的油漆 油墨和相关液体材料的旋转粘度的标准测试方法 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
|
2020-12-01 美国材料与试验协会 |
| ASTM D8162-20a 试验 |
用带温度控制加热装置的旋转粘度计测定热塑性路面标记材料表观粘度的标准试验方法 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
旋转粘度计 |
2020-09-01 美国材料与试验协会 |
| ASTM D8162-20a(2025) 试验标准 |
使用带有温度控制加热单元的旋转粘度计测定热塑性路面标线材料表观粘度的标准试验方法 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
旋转粘度计 |
2025-06-01 美国材料与试验协会 |
| ASTM RR-D01-1109 1999 试验 |
D6267/D6267M-Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
|
1999 美国材料与试验协会 |
| ASTM RR-D02-1212 1987 试验 |
D4684-Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
屈服应力 |
1987 美国材料与试验协会 |
| ASTM RR-D02-1459 1999 试验方法 |
D5293-使用冷启动模拟器在 –10 °C 和 –35 °C 之间测定发动机油和基础油表观粘度的测试方法 D5293-Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10?°C and –35?°C Using Cold-Cranking Simulator
发动机油 |
1999 美国材料与试验协会 |
| BH GSO ISO 3104:2023 |
Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
动力粘度 |
2023-1-1 巴林国家计量局 |
| BS EN ISO 3104:2023 试验 |
Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
动力粘度 |
2023-11-30 英国标准学会 |
| BS ISO 4575:2007 试验 |
塑料.聚氯乙烯糊料.使用赛佛尔斯(Severs)流变仪测定表观粘度 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
|
2007-09-28 英国标准学会 |
| DIN 53014-1:1994 试验 |
粘度测定法.测定流速曲线用环形和矩形横截面的毛细管粘度计.原理、概念、定义 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
毛细管粘度计 |
1994-02 德国标准化学会 |
| DIN EN 13179-2:2000 试验 |
沥青混合物用填充集料的试验.第2部分:沥青数值:德文版本 EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number; German version EN 13179-2:2000
矿物填料 |
2000-11 德国标准化学会 |
| DIN EN 13179-2:2000-11 试验 |
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number; German version EN 13179-2:2000
矿物填料 |
2000-11 德国标准化学会 |
| DIN EN 302-7 E:2001-09 试验 |
承重木结构件用粘合剂 试验方法 第7部分:标准条件下工作寿命的测定(草案) Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
承重木结构 适用期 |
2001-09 德国标准化学会 |
| DIN EN 302-7 E:2011-06 试验 |
承重木结构件用粘合剂 试验方法 第7部分:标准条件下工作寿命的测定(草案) Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
工作寿命 |
2011-06 德国标准化学会 |
| DIN EN 302-7:2004 试验 |
Adhesives for load-bearing wooden components – Test methods – Part 7: Determination of service life
承重木结构 适用期 |
2004-10-01 德国标准化学会 |
| DIN EN 302-7:2013 试验标准 |
承重木结构件用粘合剂.试验方法.第7部分:标准条件下工作寿命的测定.德文版本EN 302-7-2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2013
承重木结构胶黏剂 |
2013-06 德国标准化学会 |
| DIN EN ISO 2555 E:2017-05 试验标准 |
塑料 液态树脂或乳液或分散体 使用单筒型旋转粘度计法测定表观粘度(草案) Determination of apparent viscosity of plastic liquid resins or emulsions or dispersions using a single-cylinder rotational viscometer method (draft)
主轴 |
2017-05 德国标准化学会 |
| DIN EN ISO 2555:2000 试验 |
塑料.液态或乳态或分散状的树脂.用布洛克非尔德试验测定表面粘度 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989); German version EN ISO 2555:1999
树脂 |
2000-01 德国标准化学会 |
| DIN EN ISO 2555:2018 试验标准 |
塑料 液态树脂或乳液或分散体 使用单筒型旋转粘度计法测定表观粘度(ISO 2555:2018) Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
旋转粘度计 树脂 |
2018-09-01 德国标准化学会 |
| DIN EN ISO 2555:2018-09 试验 |
塑料 液态树脂或乳液或分散体 使用单筒型旋转粘度计方法测定表观粘度 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018); German version EN ISO 2555:2018
旋转粘度计 |
2018-09 德国标准化学会 |
| DIN ISO 1652:2013 试验 |
橡胶胶乳. 采用布洛氏布洛克菲尔德试验法测定表观粘度 (ISO 1652-2011) Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011)
|
2013-02 德国标准化学会 |
| DIN ISO 1652:2013-02 试验 |
Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011)
乳胶 |
2013-02 德国标准化学会 |
| EN ISO 2555:1999 试验 |
Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method
|
1999-06-01 欧洲标准化委员会 |
| GB/T 12004.4-2003 CF |
Polyvinyl chloride paste--Determination of apparent viscosity by the Brookfield test method
|
2003-08-25 国家市场监督管理总局 |
| GOST 32271-2013 试验 |
Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer
牛顿流体 |
2013 俄罗斯标准局 |
| GOST R 52257-2004 试验 |
Engine oils. Method for determination of yield stress and apparent viscosity of at low temperature
发动机油 屈服点 |
2004 俄罗斯标准局 |
| GOST R 52559-2006 试验 |
Engine oils. Method for determination of apparent viscosity at temperatures between -5 °C and -35 °C using the cold-cranking simulator
牛顿流体 |
2006 俄罗斯标准局 |
| GSO ISO 3104:2023 |
Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
动力粘度 |
2023-05-03 海湾阿拉伯国家合作委员会标准组织 |
| HG/T 2248-2012 试验 |
Thickening and rheological agent for coatings.Bentonite
保水性 膨润土 |
2012-11-07 行业标准-化工 |
| IRAM 1109-A12:2001 试验 |
涂料 通用试验方法 第A12部分:使用旋转粘度计(布罗菲尔德型或类似特性)测定非牛顿材料的流变性能 Paints. Generals test methods. Part A12: Determination of rheological properties of non-newtonian materials by rotational (Brookfield or similar type) viscometer.
触变性 |
2001-09-28 阿根廷标准化研究所 |
| IRAM 6837:2016 试验 |
Asphalts. Determination of rotational viscosity.
旋转粘度计 |
2016-10-07 阿根廷标准化研究所 |
| ISO 12644:1996 试验 |
Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
流变特性 |
1996-12 国际标准化组织 |
| ISO 1652:2011 试验 |
Rubber latex - Determination of apparent viscosity by the Brookfield test method
胶乳 |
2011-03-15 国际标准化组织 |
| ISO 2555:1989/Cor 1:1990 试验/规范 |
液态或作为乳液或分散体的树脂.布鲁克菲尔德RV粘度的测定 技术勘误表1 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method
|
1989-02-1 国际标准化组织 |
| ISO 2555:2018 规范 |
塑料.液态或象乳胶或分散体一样的树脂.用单筒式旋转粘度计法测定表观粘度 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method
|
2018-05-01 国际标准化组织 |
| ISO 4575:2007 试验 |
塑料.聚氯乙烯糊料.使用赛佛尔斯(Severs)流变仪测定表观粘度 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
|
2007-05 国际标准化组织 |
| JC/T 2270-2024 规范标准 |
Bentonite inorganic gel
|
2024-10-24 行业标准-建材 |
| JIS K 7117-1:1999 试验 |
塑料.液体或乳液或分散型树脂.第1部分:布鲁克菲尔得(BROOKFIELD)试验法测定表观粘度 Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method
|
1999-08-20 日本工业标准调查会 |
| LST EN ISO 2555:2018 试验 |
塑料 液态树脂或乳液或分散液 用单筒旋转粘度计法测定表观粘度 (ISO 2555:2018) Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
|
2018-08-31 立陶宛标准局 |
| MS 1946:2007 试验 |
RUBBER LATEX - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD (THIRD REVISION)
|
2019-01-04 马来西亚标准 |
| MS 2017:2006 试验 |
TEST METHOD FOR DETERMINATION OF YIELD STRESS AND APPARENT VISCOSITY OF ENGINE OILS AT LOW TEMPERATURE
屈服应力 牛顿流体 |
2019-04-04 马来西亚标准 |
| NF EN ISO 3104:2023 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
动力粘度 |
2023-11-01 法国标准化协会 |
| NF T60-100*NF EN ISO 3104:2023 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
动力粘度 |
2023-11-22 法国标准化协会 |
| NF T60-139:2005 试验 |
石油产品 Graisses lubrifiantes 表观粘度测定 Petroleum products - Lubricating greases - Determination of apparent viscosity
剪切速率 毛细管 |
2005-03-01 法国标准化协会 |
| SH/T 0350-1992 规范 |
Ordinary vehicle gear oil
|
1992 行业标准-石油化工 |
| SH/T 0681-1999 试验 |
Standard test method for measuring apparent viscosity of lubricating greases
剪切速率 毛细管 |
1999-09-01 行业标准-石油化工 |
| SH/T 0732-2004 试验 |
Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature-scanning technique
|
2004-04-09 行业标准-石油化工 |
| SS-EN ISO 2555:2018 试验标准 |
塑料 树脂处于液态或乳状液或分散体状态 使用单筒旋转粘度计方法测定显粘度(ISO 2555:2018) Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
|
2018 瑞典标准研究所 |
| SS-ISO 1652:2004 试验 |
橡胶乳胶 布鲁菲尔德测试方法测定显粘度(ISO 1652:2004 等同采用) Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2004, IDT)
胶乳 |
2004 瑞典标准研究所 |
| SS-ISO 4575:2007 试验 |
聚乙烯基氯化物糊状体 使用Severs流变仪测定显粘度(ISO 4575:2007 等同采用) Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer (ISO 4575:2007, IDT)
|
2007 瑞典标准研究所 |
| UNE-EN ISO 2555:2018 试验标准 |
塑料 液态树脂或乳液或分散体 使用单筒型旋转粘度计方法测定表观粘度 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
|
2018-12-26 西班牙标准化协会 |
| YY/T 0735.1-2009 试验 |
麻醉和呼吸美利体育官网首页网址.湿化人体呼吸气体的热湿交换器(HME).第1部分:用于最小潮气量为250mL的HME Anaesthetic and respiratory equipment.Heat and moisture exchangers(HMEs)for humidifying respired gases in humans.Part 1:HMEs for use with minimum tidal volumes of 250mL
|
2009-11-15 行业标准-医药 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-01 14:15