美利体育登录入口官网:AS/NZS 4013:2014
家用固体燃料燃烧器具烟气排放量测定方法
Method for determination of flue gas emissions from household solid fuel burning appliances
2025-06
- 标准号
- AS/NZS 4013:2014
- 发布
- 2014年
- 总页数
- 33页
- 发布单位
- 澳大利亚/新西兰标准
- 替代标准
- AS/NZS 4013:2025
- 当前最新
- AS/NZS 4013:2025
- 引用标准
- AS 2918 AS/NZS 4012
- 适用范围
- This Standard specifies a test method for determining the particulate emission factor from batch-fed domestic solid fuel burning appliances and the associated particulate emission acceptance criteria. This Standard applies to domestic solid fuel burning appliances. Appliances within the scope of this Standard include space-heating appliances and space-heating appliances which include water-heating devices. Appliances excluded from this Standard are site-built masonry appliances, central heating appliances, cooking appliances, appliances intended solely for water heating, appliances intended solely to distribute convective heat via ducting to locations remote from the appliance, appliances that when fired at the high burn rate prescribed in this Standard have a maximum carbon dioxide output from the combustion chamber of less than 5% by volume with any optional doors fitted and closed, and appliances with volumetric flow rates through the combustion chamber which are too high to allow for total smoke capture by the method described in this Standard.
| 术语 | 描述 |
|---|---|
| 25 kW以上器具 Appliances above 25 kW | 在大于25 kW的最大热输出率的加热器具，该输出率是在高燃烧速率条件下测量不少于六分钟得出的，燃料负荷计算基于AS/NZS 4012:2014第5.3.1条描述的燃料室可用容积的16.5%名义体积。 |
| 器具颗粒排放因子 Appliance particulate emission factor | 高、中、低三种燃烧速率下各自的平均颗粒排放因数的算术平均值。 |
| 中央供热器具 Central heating appliance | 旨在通过将热量传递给居住区域的空间供热器具（通过管道热空气、热水或其他流体）。对于新西兰，这也指在高燃烧速率条件下，最大热输出率超过25 kW（根据AS/NZS 4012:2014第6节测量）的供热器具。 |
| 烹饪炉具 Cooking stove appliance | 固体燃料燃烧器具，包含至少一个烹饪炉灶和一个容积不小于28 L的烤箱。燃烧产物能够绕过烤箱输送。 |
| 国际新西兰认可委员会 International Accreditation New Zealand | 国际认可新西兰。 |
美利体育登录入口官网: AS/NZS 4013:2014 中提到的仪器美利体育官网首页网址
| 干气体流量计 校准准确度±1%采样体积 | 用于测量采样气体干气体体积的合适仪器。 |
| 平衡秤 准确度±0.1 mg | 用于称量过滤器、过滤器容器及采样探针的美利体育官网首页网址。 |
| 皮托管 S型或标准皮托管，已知系数 | 用于测量皮托管速度头，偏差在±1 Pa以内的压力测量装置。 |
| 稀释隧道 入口开口直径最小450 mm，出口直径150 mm | 用于收集排放物的美利体育官网首页网址，包括排气罩、连接管、弯头、采样段和抽气风机。 |