美利体育登录入口官网

美利体育登录入口官网:IEC 61000-3-12:2011
电磁兼容性(EMC).第3-12部分:限值.与每相输入电流16 A和75 A的公用低压系统连接的美利体育官网首页网址产生的谐波电流限值

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase

被代替

标准号

IEC 61000-3-12:2011

发布

2011年

国际标准分类(ICS)

33.100.10 发射   

发布单位

国际电工委员会

替代标准

IEC 61000-3-12:2011/ISH1:2012

当前最新

IEC 61000-3-12:2021

 

 

引用标准

IEC 60038 IEC 61000-2-2 IEC 61000-2-4 IEC 61000-3-2 IEC 61000-4-7

被代替标准

IEC 77A/740/FDIS:2011 IEC 61000-3-12:2004

 

 

本体

电气和电子美利体育官网首页网址 谐波电流

适用范围

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system. The limits given in this International Standard are applicable to electrical and electronic equipment with a rated input current exceeding 16 A and up to and including 75 A per phase, intended to be connected to public low-voltage a.c. distribution systems of the following types: nominal voltage up to 240 V, single-phase, two or three wires; nominal voltage up to 690 V, three-phase, three or four wires; nominal frequency 50 Hz or 60 Hz. Other distribution systems are excluded. The limits given in this edition apply to equipment when connected to 230 / 400 V, 50 Hz systems. See also Clause 5. NOTE 1 The limits for the other systems will be added in a future edition of this standard. NOTE 2 Equipment with a rated input current exceeding 75 A per phase should be considered in the harmonic current requirements for installations. See IEC/TR 61000-3-6 and future IEC/TR 61000-3-14. This standard applies to equipment intended to be connected to low-voltage systems interfacing with the public supply at the low-voltage level. It does not apply to equipment intended to be connected only to private low-voltage systems interfacing with the public supply only at the medium- or high-voltage level. NOTE 3 The scope of this standard is limited to equipment connected to public low voltage systems because emissions from equipment installed in private low voltage systems can be controlled in aggregate at the MV point of common coupling using procedures defined in IEC/TR 61000-3-6 and/or by means of contractual agreements between the distribution network operator and the customer. It is expected that operators of private systems will manage the EMC environment in a manner that ensures compliance with the provisions given in IEC/TR 61000-3-6 and/or the contractual agreements. NOTE 4 If the equipment is intended to be connected only to private systems, the manufacturer should make this very clear in the product documentation. NOTE 5 The system is not a manufacturer with input current ≤ 16 A per phase and that does not comply with the requirements and limits of standard IEC 61000-3-2 may be permitted to be connected to certain types of low voltage supplies, in the same way as equipment with input current >16 A per phase and that does not comply with the requirements an all limits of the present standard (see Annex C). NOTE 6 The limits in this standard are not applicable to stand-alone harmonic filters. This standard defines: a) requirements and emission limits for equipment; b) methods for type tests and simulations. Tests according to this International Standard are type tests of complete pieces of equipment. Conformity with this standard can also be determined by validated simulations.

美利体育登录入口官网: IEC 61000-3-12:2011相似标准

美利体育登录入口官网: 谁引用了IEC 61000-3-12:2011 更多引用