美利体育登录入口官网

美利体育登录入口官网:IEC 60404-15:2012+AMD1:2016 CSV
 ；磁性材料第15部分:弱磁性材料相对磁导率的测定方法

 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials

被代替

标准号

IEC 60404-15:2012+AMD1:2016 CSV

发布

2016年

国际标准分类(ICS)

29.030 磁性材料   

发布单位

国际电工委员会

替代标准

IEC 60404-15:2016

当前最新

IEC 60404-15:2016

 

 

引用标准

IEC 60050 ISO/IEC GUIDE 98-3:2008

 

 

本体

参考材料 弱磁性材料 相对磁导率

适用范围

This part of IEC 60404 specifies a solenoid method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic materials (including austenitic stainless steel). The magnetic balance and permeability meter methods are both comparison methods calibrated using reference materials to determine the value of the relative magnetic permeability of the test specimen. The relative magnetic permeability range for each of these methods is shown in Table 1. The methods given are for applied magnetic field strengths of between 5 kA/m and 100 kA/m. Table 1 - Relative magnetic permeability ranges for the methods described Measurement method Relative magnetic permeability range Solenoid 1,003 to 2 Magnetic moment 1,003 to 1,2 Magnetic balance 1,003 to 5 Permeability meter 1,003 to 2 NOTE 1 The relative magnetic permeability range given for the magnetic balance method covers the inserts provided with a typical instrument. These can only be assessed at values for which calibrated reference materials exist. NOTE 2 For a relative magnetic permeability larger than 2, a reference material cannot be calibrated using this written standard. A note of this is given in the test report explaining that the values measured using the magnetic balance are for indication only. The solenoid method is the reference method. The magnetic moment method described is used mainly for the measurement of the relative magnetic permeability of mass standards. Two comparator methods used by industry are described. These can be calibrated using reference materials for which the relative magnetic permeability has been determined using the reference method. When suitable, the magnetic moment method can also be used. The dimensions of the reference material need to be given careful consideration when determining the uncertainty in the calibration value due to self-demagnetization effects. See Annex A for more information on correcting for self-demagnetization.

美利体育登录入口官网: IEC 60404-15:2012+AMD1:2016 CSV 中提到的仪器美利体育官网首页网址

美利体育登录入口官网: 专题

美利体育登录入口官网: IEC 60404-15:2012+AMD1:2016 CSV相似标准