
点击查看大图
本文件规定了一种用于测定空气中二氧化硫浓度的连续测量方法,采用紫外荧光测量原理。本文件规定了性能特征,并规定了紫外荧光测量仪器适用性测试的相关最低要求。它还包含了对测量仪器在特定测量点适用性的评估,涉及欧盟关于数据质量的要求,以及采样、校准和质量保证的要求。该方法适用于测定空气中二氧化硫的质量浓度,范围为0 μg/m?至1000 μg/m?。该浓度范围对应于...
| 术语 | |
|---|---|
| 死时间(上升) | Dead time (rise) |
| 限值 | Limit value |
| 长期漂移 | Long-term drift |
| 测量站 | Measurement station |
| 平行测量 | Parallel measurement |
| 性能特征 | Performance characteristic |
| 性能标准 | Performance criterion |
| 控制间隔 | Control interval |
| 重复性 | Repeatability |
| 现场条件下的比较精密度 | Comparative precision under field conditions |
| 设定时间 | Settling time |
| 设定时间(衰减) | Settling time (fall) |
| 设定时间(上升) | Settling time (rise) |
| 上升时间 | Rise time |
| 样品空气 | Sample air |
| 样品入口 | Sample inlet |
| 短期漂移 | Short-term drift |
| 标准不确定度 | Standard uncertainty |
| 环境温度 | Ambient temperature |
| 适用性认可 | Suitability recognition |
| 适用性测试 | Suitability test |
| 测量不确定度 | Measurement uncertainty |
| 环境空气 | Ambient air |
| 样品气温度 | Sample gas temperature |
| 仪器可用性 | Availability of the measuring instrument |
| 校准 | Calibration |
| 认证范围 | Certification range |
| 合成标准不确定度 | Combined standard uncertainty |
| 扩展因子 | Coverage factor |
| 指定机构 | Notified body |
| 扩展测量不确定度 | Expanded measurement uncertainty |
| 衰减时间 | Fall time |
| 独立测量 | Independent measurement |
| 单次测量 | Single measurement |
| 影响量 | Influence quantity |
| 干扰 | Interference |
| 干扰组分 | Interfering component |
| 缺乏拟合 | Lack of fit |
| 死时间 | Dead time |
| 死时间(衰减) | Dead time (fall) |
| 样品气分配器 连接多个测量仪器的分配系统 | 用于将环境空气分配给多个测量仪器的装置,需配备泵或风扇以确保流速和停留时间符合要求。 |
| 紫外荧光二氧化硫测量仪 符合EN 14212:2005要求的仪器 | 用于测定空气中二氧化硫浓度的连续测量仪器,基于紫外荧光原理,包含光学装置、反应室、美利体育登录入口官网器及压力/温度补偿系统。 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-01 10:54