共找到 35 条与 ystd 相关的标准，共 3 页
This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses: -- roofing, -- internal wall finishes, -- external wall and ceiling finishes. For the purpose of this document fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics. This document covers fibre-cement profiled sheets reinforced with fibres of different type as specified in 5.1.1, with and without factory applied coating. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets. NOTE Some of these requirements can be applied to curved sheets, after agreement between manufacturer and purchaser.
Fibre-cement profiled sheets and fittings - Product specification and test methods
适用范围 本欧洲标准规定了纤维水泥波纹板及其配套零件的技术要求，并建立了控制方法、测试方法和验收条件，用于以下用途之一或多个： - 屋顶； - 内墙表面处理； - 外墙及天花板的表面处理。
Fibre-cement profiled sheets and fittings. Product specification and test methods
This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses: — internal wall and ceiling finishes; — external wall and ceiling finishes. Products covered by this European Standard can be used for other purposes provided they comply with the relevant application standard, e.g. rigid underlays. This European Standard covers sheets reinforced with fibres of different types as specified in 5.1.1. This European Standard does not cover sheets for fire protection purposes. This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.
Fibre-cement flat sheets. Product specification and test methods
What is BS EN 492 - Fibre-cement slates and fittings about?? ? BS EN 492 is the European standard on the roof covering products for discontinuous laying and products for wall cladding. ? BS EN 492 specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or ? more of the following uses: ? Roofing ?
Fibre-cement slates and fittings. Product specification and test methods
本规范规定了纤维水泥波纹板及其配套屋面配件的技术要求；此外，它还包含了控制、检验和验收程序。根据波纹高度和机械性能，纤维水泥波纹板被分类。图1至图7展示了型材的示例。注：经制造商和买方协商，某些要求也可应用于弯曲波纹板。
Fiber-cement profiled sheets and their fittings for roofing — Product specification and test methods
Diese Europ?ische Norm legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement-Dachplatten und dazugeh?rige Faserzement-Formteile für einen oder mehrere der folgenden Verwendungszwecke fest: Dachdeckungen; Innenwandbekleidungen; Au?enwand- und Deckenbekleidungen. Diese Europ?ische Norm gilt für Faserzement-Dachplatten bis zu einer maximalen H?he h von 850 mm (siehe Abschnitt 4) für eine überlappende Verlegung. Für die Anwendung dieser Europ?ischen Norm werden Faserzement-Dachplatten nach ihrem Biegemoment klassifiziert. Diese Europ?ische Norm erstreckt sich auf Faserzement-Dachplatten, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind. Diese Europ?ische Norm enth?lt keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlegeverfahren, Windsogsicherheit oder Regensicherheit der verlegten Produkte.
Fibre-cement slates and fittings - Product specification and test methods; German version EN 492:2012+A2:2018
This International Standard specifies technical requirements and methods for the inspection and testing of straight short and long fibre-cement profiled sheets and their fibre-cement fittings designed to provide the weather-exposed surfaces on roofs and internal and external walls of buildings. Products covered by this International Standard can be used for other purposes, provided they comply with the appropriate national or international application code or standard. Some of the requirements of this International Standard can apply, after agreement between manufacturer and purchaser, to curved profiled sheets. The type tests described in this International Standard are not intended to evaluate the performance of the coating in isolation (colour-fastness, adhesion, etc.). Specific performance requirements for coatings are referenced in other International Standards or national standards. This International Standard does not apply to fibre-cement profiled sheets and fittings reinforced with asbestos fibres.
Fibre-cement corrugated sheets and fittings for roofing and cladding
Fibre-cement corrugated sheets and fittings for roofing and cladding
本欧洲标准规定了纤维水泥平板、墙面板和板材（以下简称板材）的技术要求，并建立了检验和测试方法以及验收条件，适用于以下一种或多种用途： - 内墙和天花板饰面 - 外墙和天花板饰面 本标准涵盖的产品可用于其他用途，前提是符合相关应用标准，例如刚性底层材料。 本标准涵盖用不同类型纤维增强的板材，如第5.1.1节所述。 本标准不适用于防火用途的板材。 本标准不包括与工程、设计要求、安装技术、安装板材的抗风揭性或防水性相关的计算。
Fibre-cement flat sheets - Product specification and test methods
This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses: - roofing; - internal wall finishes; - external wall and ceiling finishes. This European Standard applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this European Standard, fibre-cement slates have been classified according to their bending moment. This European Standard covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1. This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.
Fibre-cement slates and fittings - Product specification and test methods
This document specifies methods for the inspection and testing of fibre-cement flat sheets and provides the acceptance conditions for their use in one or more of the following applications: — external wall and ceiling finishes; — internal wall and ceiling finishes; — internal and external backing sheets. Products covered by this document can be used for other purposes, provided they comply with the appropriate national or international application code or standard. NOTE 1 This document does not apply to sheets for fire protection purposes. NOTE 3 This document does not apply to the following products: NOTE 2 This document does not include calculations for installation design requirements, wind uplift or water proofing of the installed sheets. — boards of Portland or equivalent cement reinforced with fibrous wood particles; — sheets containing asbestos fibre reinforcement; — — — fibre-reinforced boards of calcium silicate or cement for thermal insulation or fire protection; sheets containing steel fibre reinforcement; fibre-cement roofing slates.
Fibre-cement flat sheets - Product specification and test methods
Diese Europ?ische Norm legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement-Dachplatten und dazugeh?rige Faserzement-Formteile für einen oder mehrere der folgenden Verwendungszwecke fest: - Dachdeckungen; - Innenwandbekleidungen; - Au?enwand- und Deckenbekleidungen. Diese Europ?ische Norm gilt für Faserzement-Dachplatten bis zu einer maximalen H?he h von 850 mm (siehe Abschnitt 4) für eine überlappende Verlegung. Für die Anwendung dieser Europ?ischen Norm werden Faserzement-Dachplatten nach ihrem Biegemoment klassifiziert. Diese Europ?ische Norm erstreckt sich auf Faserzement-Dachplatten, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind. Diese Europ?ische Norm enth?lt keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlegeverfahren, Windsogsicherheit oder Regensicherheit der verlegten Produkte.
Fibre-cement slates and fittings - Product specification and test methods (includes Amendment :2018)
本规范规定了纤维水泥瓦及其配套屋面配件的技术要求，并包含控制、检验及验收条件。 本规范适用于最大高度 h 为 850 mm 的纤维水泥瓦，用于重叠铺设的屋面。 出于本规范的目的，纤维水泥瓦根据其抗弯强度进行分类。
Fiber-cement slates and their fittings for roofing — Product specification and test methods
This International Standard specifies technical requirements and methods for the inspection and testing of fibre-cement slates and shingles and their fibre-cement fittings, designed to protect the weather-exposed surfaces on roofs and claddings of buildings. Products covered by this International Standard can be used for other purposes provided they comply with the appropriate national or international application code or standard. This International Standard applies to fibre-cement slates with a height dimension not exceeding 850 mm for overlapping assembly (see 5.4). The type tests described in this International Standard are not intended to evaluate the performance of the coating in isolation (colour fastness, adhesion, etc.). Specific performance requirements for coatings are referenced in other ISO or national standards. This International Standard does not apply to fibre-cement slates reinforced with asbestos fibres. This International Standard does not include calculations for installation requirements, wind uplift or rain proofing of the installed products. NOTE National standards for installation requirements can be adopted.
Fibre-cement slates and fittings - Product specification and test methods
本文档规定了基于ETSI TS 103 433多部分交付物的系统的通用内容相关动态元数据，以及从SDR信号和指定元数据重建HDR信号的后解码过程。此重建过程通常在消费电子美利体育官网首页网址（如电视机、智能手机、平板电脑或机顶盒）中调用。此外，它还提供了关于所述HDR系统使用的信息和推荐意见。
High-Performance Single Layer High Dynamic Range (HDR) System for use in Consumer Electronics devices; Part 1: Directly Standard Dynamic Range (SDR) Compatible HDR System (SL-HDR1) (V1.4.1)
