共找到 40 条与 Raster Image Processor (RIP) 相关的标准，共 3 页
本文件规定了3类和4类打印机规格表中应包含的最小信息，以便用户能够比较不同美利体育官网首页网址的特征。这些规格表适用于描述打印机性能特性的文档，包括在操作手册、产品小册子或网站上。本文件适用于可在办公环境中运行的打印机。需要特别配置房间或有特别培训的操作员要求的打印机不在本文件范围内。注意：本文件旨在帮助用户选择满足其需求的打印机。
Office equipment -- Minimum information to be included in specification sheets-- Part 2:Class 3 and Class 4 printers
本文件规定了3类和4类打印机规格表中应包含的最低信息，以便用户比较不同机器的特性。术语“规格表”适用于描述打印机性能特征的文件，这些文件包含在用户手册、产品宣传册或网站上。 本文件适用于可在办公环境中操作的打印机。需要特殊装备房间或经过特殊培训的操作员的打印机不在本文件范围内。 注：本文件旨在帮助用户选择符合其要求的打印机。 ISO/IEC 11160系列涉及不同类别的打印机，如附表C.1所示的3类和4类打印机。打印机分类的要素见附录A。3类和4类打印机的详细描述见(3.4)和(3.5)。串行打印机定义为ISO/IEC 11160-1:1997附录C中的1类或2类打印机。
Office equipment. Minimum information to be included in specification sheets. Class 3 and Class 4 printers
This document specifies the Contrast–Resolution test chart, the requirements on the printing process needed to reproduce this test chart, the required characteristics of a high resolution scanner needed to digitize the information reproduced on printed test charts, and the requirements on the interpretation of this digitized data. It also specifies the resolution-score method for evaluating the perceptual resolution of printed material using the Contrast–Resolution test chart. The procedure specified in this document is intended for a characterization of the perceived resolution of a graphic arts production printing system using the Contrast–Resolution test chart.
Graphic Technology - Image quality evaluation methods for printed matter - Part 31: Evaluation of the perceived resolution of printing systems with the contrast - resolution chart (ISO/TS 18621-31:2020)
This document specifies the Contrast–Resolution test chart, the requirements on the printing process needed to reproduce this test chart, the required characteristics of a high resolution scanner needed to digitize the information reproduced on printed test charts, and the requirements on the interpretation of this digitized data. It also specifies the resolution-score method for evaluating the perceptual resolution of printed material using the Contrast–Resolution test chart. The procedure specified in this document is intended for a characterization of the perceived resolution of a graphic arts production printing system using the Contrast–Resolution test chart.
Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart (ISO/TS 18621-31:2024, IDT)
Purpose of this document is the definition of terms and characteristics for the description of printers. All the required information for the technical description are being stated. It serves the applicant and manufacturer as a help for orientation concerning the quality and function.
Office machines - Printers - Part 1: Concepts and classification
ISO 20690:2018 provides requirements and recommendations for measuring the electricity consumption of small-format and wide-format digital production presses printing in different modes of operation. It is intended for use on equipment that has been declared by the manufacturer to be suitable for use as a digital production printing press. ISO 20690:2018 provides a means to compare the energy efficiency figures according to two or more characteristic machine combinations: Best Quality (BQ), Best Productivity (BP) or other combinations. ISO 20690:2018 is not suitable for determining the power consumption of individual device components such as servos, fans, compressors, control boards and so on. It excludes digital presses designed to print textiles intended for clothing or machines, which similarly depend on additional processes to produce the printed product, such as ceramics.
Graphic technology - Determination of the operating power consumption of digital printing devices (ISO 20690:2018, IDT)
ISO 12647-3:2013 specifies a number of process parameters and their values to be applied when producing colour separations and printing forms for newspaper single or four-colour printing. The parameters and values are chosen in consideration of the process, covering the process stages: "colour separation", "making of the printing formed", "OK print or proof" and "production printing". ISO 12647-3:2013 is intended to enhance communication between printers, publishers and advertisers and to make print buyers aware of the expected printed result in advance, enabling them to plan accordingly. ISO 12647-3:2013 defines tolerances, allowing for objective quality evaluations and raising the competitiveness of newspapers compared to other media. ISO 12647-3:2013 is applicable: to coldset offset production printing on newsprint that use colour separation data; by analogy to press printing from printing surfaces produced by direct imaging; to line screens and non-periodic screens, parameters given can be applied by analogy.
Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints - Part 3: Coldset offset lithography on newsprint (ISO 12647-3:2013, IDT)
本文件定义了用于客观测量数字电摄影打印机产生的反射模式单色打印页面的感知分辨率的打印质量特性的方法。本文件的测量方法源自几种现有的用于评估成像系统分辨率特性的技术。这些测量方法中的每一种都旨在用于评估打印系统的感知分辨率的工程评估，不适用于广告宣传目的。 本文件的方法仅适用于通过电摄影打印技术以反射模式产生的单色打印。本文件适用于使用能够接受PostScript?和封装PostScript（EPS）作业的PostScript?解释器的单色打印机。
Information technology. Office equipment. Test pages and methods for measuring monochrome printer resolution
本文件规定了用于生产硬拷贝数字校样打印的系统要求，这些打印旨在模拟由一组特征数据定义的印刷条件。提供了与这些要求相关的适当测试方法的建议。
Graphic technology. Process control for the production of halftone colour separations, proof and production prints. Proofing processes working directly from digital data
This part of ISO 12647 specifies a number of process parameters and their values to be applied when producing colour separations and printing forms for newspaper single or four-colour printing. The parameters and values are chosen in consideration of the process, covering the process stages: "colour separation", "making of the printing formed", "OK print or proof" and "production printing".
Graphic technology.Process control for the production of half-tone colour separations, proofs and production prints.Part 3: Coldset offset lithography on newsprint
本部分ISO 12637定义了一组可用于起草其他图形技术国际标准的预印术语。为了便于翻译成其他语言，定义的措辞尽可能避免与某种语言相关的特殊性。
Graphic technology - Vocabulary - Part 2: Prepress terms
本文件定义了用于评估反射式黑白打印页面感知分辨率的客观测量方法。这些测量方法来源于现有的图像系统分辨率特性评估技术，并专门适用于电子光致成像打印机生产的黑白打印页的质量特性测量。该文档适用于使用PostScript?解释器的单色打印机，可接受PostScript和嵌入式PostScript (EPS) 作业。 本文件不适用于彩色打印或非反射模式打印。
Information technology — Office equipment — Test pages and methods for measuring monochrome printer resolution
本部分ISO 12637定义了印前术语集，可用于起草图形技术领域的其他国际标准。为便于翻译成其他语言，定义措辞尽量避免特定语言的特性。
Graphic technology - Vocabulary - Prepress terms
本技术规范规定了三种方法，用于调整输入到印刷系统的数字内容数据，以实现多台印刷机在印刷到相同总体目标条件时印刷结果的一致性。这三种方法通常被识别为：a) 色调值曲线的匹配；b) 使用近中性标尺；c) 使用CMYK到CMYK的多维变换。其中包括建立必要传递曲线的目标条件程序、确定单个传递曲线的程序，以及这三种方法的适用性比较。这些调整程序适用于使用CMYK色料的印刷系统，但不局限于使用传统油墨在纸张上印刷的系统，也可以涉及用于打样和/或数字印刷的其他标记技术。
Graphic technology - Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data
This document specifies requirements intended to simulate systems for printing that are used to produce hard-copy digital data. Recommendations are provided with regard to appropriate test methods associated with these requirements.
Graphic technology - Process control for the production of halftone colour separations, proof and production prints - Part 7: Proofing processes working directly from digital data
