共找到 150 条与 IP-Code 相关的标准，共 10 页
Degrees of protection provided by enclosures(IP Code)
Degrees of protection provided by enclosures (IP CODE)
Degrees of protection provided by enclosures(IP Code)
Scope and objectThis standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72@5 kV.The object of this standard is to give:Barriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.a) Definitions for degrees of protection provided by enclosures of electrical equipment as regards:1) protection of persons against access to hazardous parts inside the enclosure;2) protection of the equipment inside the enclosure against ingress of solid foreign objects;3) protection of the equipment inside the enclosure against harmful effects due to the ingress of water.b) Designations for these degrees of protection.c) Requirements for each designation.d) Tests to be performed to verify that the enclosure meets the requirements of this standard.It will remain the responsibility of individual technical committees to decide on the extent and manner in which@ the classification is used in their standards and to define ??enclosure?? as it applies to their equipment. However@ it is recommended that for a given classification the tests do not differ from those specified in this standard. If necessary@ complementary requirements may be included in the relevant product standard. A guide for the details to be specified in relevant product standards is given in annex B.For a particular type of equipment@ a technical committee may specify different requirements provided that at least the same level of safety is ensured.This standard deals only with enclosures that are in all other respects suitable for their intended use as specified in the relevant product standard and which from the point of view of materials and workmanship ensure that the claimed degrees of protection are maintained under the normal conditions of use.This standard is also applicable to empty enclosures provided that the general test requirements are met and that the selected degree of protection is suitable for the type of equipment to be protected.Measures to protect both the enclosure and the equipment inside the enclosure against external influences or conditions such as- mechanical impacts- corrosion- corrosive solvents (for example@ cutting liquids)- fungus- vermin- solar radiation- icing- moisture (for example@ produced by condensation)- explosive atmospheresand the protection against contact with hazardous moving parts external to the enclosure (such as fans)@ are matters for the relevant product standard to be protected.Barriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.
Degrees of Protection Provided by Envelopes (IP Code) (Edition 2.1 ***Applies to French text only***)
Rotating electrical machines-5 Degrees of protection provided by the integral design of rotating electrical machines (IP CODE) - Classification
本国际标准适用于通过外壳对旋转电机进行分类的防护等级。它规定了外壳的要求，这些外壳在其他方面均适合其预期用途，并且在材料和工艺方面确保在正常使用条件下保持本规范中规定的特性。本规范未描述：- 对电机机械损坏的防护或诸如潮湿（例如由冷凝引起）、腐蚀性粉尘或蒸汽、霉菌或害虫等条件的防护；- 用于爆炸性环境（粉尘、蒸汽）的电机的防爆类型；- 外壳外部仅用于保护人员安全的防护罩。对于特定应用（如农业和家庭美利体育官网首页网址），可以规定针对意外或故意接触的进一步措施。本规范列出了旋转电机外壳防护等级的规范术语，涉及：a) 人员防止接触或接近带电部件以及防止接触外壳内运动部件（光滑旋转轴和类似部件除外）的防护，以及防止固体异物进入；b) 防止水侵入对电机造成有害影响的防护。它列出了这些防护等级的名称以及用于证明电机符合本规范要求的测试。
Drehende elektrische Maschinen - Teil 5: Schutzarten aufgrund der Gesamtkonstruktion von drehenden elektrischen Maschinen (IP-Code) - Einteilung (IEC 60034-5:2000 + Corrigendum 2001 + A1:2006); Deutsche Fassung EN 60034-5:2001 + A1:2007
Schutzarten durch Gehaeuse (IP-Code) (IEC 60529:1989 + A1:1999 + A2:2013); Deutsche Fassung EN 60529:1991 + A1:2000 + A2:2013@ Berichtigung zu DIN EN 60529 (VDE 0470-1):2014-09@ (IEC 60529 Edition 2.2 Corrigendum 2:2015); Deutsche Fassung EN 60529:1991/AC
本模型代码提供了有关处理或储存易燃流体的美利体育官网首页网址周围区域划分的指导，并为在这些区域中选择固定电气美利体育官网首页网址和定位其他点火源提供了基础。在此上下文中，'区域'始终被视为三维空间。在将任何临时电气美利体育官网首页网址或能够产生点火源的移动美利体育官网首页网址引入设施并使用时，应考虑区域划分分区限制。本模型代码中提供的指导旨在适用于处理、分销、生产和零售部门的设施，具有国际适用性。本模型代码的应用仅限于物理特性类似于石油、石油化工及相关行业所使用的易燃流体。它不涵盖可燃粉尘，也不涵盖处理易燃流体导致的健康风险评估。本代码未全面解决易燃制冷或低温液体的释放问题，因为它们的分散特性与较高温度的流体显著不同。模型代码中介绍的一般方法可应用于此类释放，前提是使用适当的分散特性进行特定的分散建模。为此，本代码给出了有关这些流体产生的危险区域的一些有限信息和指导。如果希望考虑液体的区域划分，则有必要使用合适的分散模型进行特定计算。 本章涵盖所有设施。提供了典型危险半径，使用了发表在EI研究报告《分散建：图扑阒С諩I安全实践模型代码 第15部分：处理易燃流体的设施区域划分代码》中的结果。如果现场条件不符合直接示例中陈述的条件，则应使用与本章一致的 hazard radii。 本章讨论了通风对非开放区域危险半径和区域划分的影响。描述了不同程度的通风，图4.1提供了评估给定情况下的通风类型和程度的程序。定义了开放区域、庇护区域和封闭区域，并描述了对每种情况的区域划分应用。讨论了人工通风方法以及失去通风对区域划分的影响。
Area Classification for Installations Handling Flammable Fluids
Scope and objectThis standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72@5 kV.The object of this standard is to give:Barriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.a) Definitions for degrees of protection provided by enclosures of electrical equipment as regards:1) protection of persons against access to hazardous parts inside the enclosure;2) protection of the equipment inside the enclosure against ingress of solid foreign objects;3) protection of the equipment inside the enclosure against harmful effects due to the ingress of water.b) Designations for these degrees of protection.c) Requirements for each designation.d) Tests to be performed to verify that the enclosure meets the requirements of this standard.It will remain the responsibility of individual technical committees to decide on the extent and manner in which@ the classification is used in their standards and to define ??enclosure?? as it applies to their equipment. However@ it is recommended that for a given classification the tests do not differ from those specified in this standard. If necessary@ complementary requirements may be included in the relevant product standard. A guide for the details to be specified in relevant product standards is given in annex B.For a particular type of equipment@ a technical committee may specify different requirements provided that at least the same level of safety is ensured.This standard deals only with enclosures that are in all other respects suitable for their intended use as specified in the relevant product standard and which from the point of view of materials and workmanship ensure that the claimed degrees of protection are maintained under the normal conditions of use.This standard is also applicable to empty enclosures provided that the general test requirements are met and that the selected degree of protection is suitable for the type of equipment to be protected.Measures to protect both the enclosure and the equipment inside the enclosure against external influences or conditions such as- mechanical impacts- corrosion- corrosive solvents (for example@ cutting liquids)- fungus- vermin- solar radiation- icing- moisture (for example@ produced by condensation)- explosive atmospheresand the protection against contact with hazardous moving parts external to the enclosure (such as fans)@ are matters for the relevant product standard to be protected.Barriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.
Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)
本文件是IEC 60529的修正案，提出了IPX9“高压水测试”的提案。它规定了防护等级（IP代码）中第二特征数字9（高压水测试）的测试方法、条件和验收要求。该修正案适用于通过外壳提供的防护等级，特别是针对高压水喷射和蒸汽喷射清洗的防护。
Degrees of protection provided by enclosures (IP Code) – Proposal on IPX9 ?High pressure water test”
本文件是 DIN IEC 60529/A1 (VDE 0470-1/A1) 的草案，发布于 2010 年 4 月。它是对 DIN EN 60529 (VDE 0470-1):2000-09 的修改建议，旨在增加 IPX9“高压水冲洗”的防护等级。该文件规定了外壳防护等级（IP 代码）中第二特征数字 9（高压水冲洗）的测试方法、试验条件和验收要求。文件包含了对 IP 代码排列、含义、应用示例的补充，以及针对小尺寸和大尺寸外壳的具体测试装置和参数（如喷嘴类型、流量、压力、角度、时间等）。
Degrees of protection provided by enclosures (IP Code) – Proposal on IPX9 ?High pressure water test"
Diese Norm findet zur Einteilung von Schutzarten durch Geh?use für elektrische Betriebsmittel mit Bemessungsspannungen nicht über 72,5 kV Anwendung. Der Zweck dieser Norm ist es, Folgendes festzulegen: a) Begriffe für Schutzarten durch Geh?use von elektrischen Betriebsmitteln, betreffend: 1) Schutz von Personen gegen den Zugang zu gef?hrlichen Teilen innerhalb des Geh?uses; 2) Schutz des Betriebsmittels innerhalb des Geh?uses gegen Eindringen von festen Fremdk?rpern; 3) Schutz des Betriebsmittels innerhalb des Geh?uses gegen sch?dliche Einwirkungen durch das Eindringen von Wasser. b) Bezeichnungen für diese Schutzarten. c) Anforderungen für jede Bezeichnung. d) Prüfungen, die durchzuführen sind, um zu best?tigen, dass das Geh?use die Anforderungen dieser Norm erfüllt. Diese Norm ist auch auf leere Geh?use anwendbar, vorausgesetzt, dass die allgemeinen Prüfanforderungen erfüllt werden und dass die gew?hlte Schutzart für die Art des zu schützenden Betriebsmittels geeignet ist.
Schutzarten durch Gehaeuse (IP-Code) (IEC 60529:1989 + A1:1999 + A2:2013); Deutsche Fassung EN 60529:1991 + A1:2000 + A2:2013
Schutzarten durch Gehaeuse (IP-Code) (IEC 60529:1989/A2:2013/COR1:2019); Deutsche Fassung EN 60529:1991/A2:2013/AC:2019-02
This International Standard applies to degrees of protection (IP-Code) provided by enclosures of the electrical equipment of road vehicles. It specifies the following: a) Designations and definitions of types and degrees of protection provided by enclosures of electrical equipment (IP-Code) for the: - protection of electrical equipment within the enclosure against ingress of foreign objects, including dust (protection against foreign objects); - protection of electrical equipment inside the enclosure against effects due to ingress of water (protection against water); - protection of persons against access to hazardous parts inside the enclosure (protection against access). b) Requirements for each degree of protection. c) Tests to be carried out in order to confirm that the enclosure complies with requirements of the relevant degree of protection.
Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
This International Standard applies to degrees of protection (IP-Code) provided by enclosures of the electrical equipment of road vehicles. It specifies the following: a) Designations and definitions of types and degrees of protection provided by enclosures of electrical equipment (IP-Code) for the: ? protection of electrical equipment within the enclosure against ingress of foreign objects, including dust (protection against foreign objects); ? protection of electrical equipment inside the enclosure against effects due to ingress of water (protection against water); ? protection of persons against access to hazardous parts inside the enclosure (protection against access). b) Requirements for each degree of protection. c) Tests to be carried out in order to confirm that the enclosure complies with requirements of the relevant degree of protection.
Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment against foreign objects, water and access
