共找到 150 条与 Compatible Codec Configurations 相关的标准，共 10 页
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 15.0.0 Release 15)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 13.2.0 Release 13)
本文件规定了在CS核心网络中MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文件假设呼叫控制和承载传输与控制的分离实现，如3GPP TS 23.205 [1]基于BICC的Nc和3GPP TS 23.231 [30]基于SIP-I的Nc中所规定。对于基于BICC的Nc，使用此承载数据传输（Nb UP）的用户平面协议在3GPP TS 29.415 [3]中描述。Nb接口的传输格式在IP传输时可以可选地允许RTP复用。注意，本文件不排除MSC服务器和MGW组合的实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 16.0.0 Release 16)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 15.0.0 Release 15)
本文件规定了CS核心网络中MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文件假设了呼叫控制和承载传输与控制的分离实现，如3GPP TS 23.205 [1]（基于BICC的Nc）和3GPP TS 23.231 [30]（基于SIP-I的Nc）中所述，参见图1。对于基于BICC的Nc，使用此承载数据传输（Nb UP）的用户平面协议在3GPP TS 29.415 [3]中描述。对于IP传输的Nb接口，传输格式可以选择性地允许RTP复用。注意，本文件不排除MSC服务器和MGW组合的实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 16.0.0 Release 16)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 17.0.0 Release 17)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 13.1.0 Release 13)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 18.0.0 Release 18)
本文件规定了在CS核心网中，Nb接口上MGW（媒体网关）之间使用的承载数据传输和承载控制协议。本文件假设实现了呼叫控制与承载传输及控制的分离，如3GPP TS 23.205 [1]中基于BICC的Nc接口所述，以及3GPP TS 23.231 [30]中基于SIP-I的Nc接口所述。对于基于BICC的Nc接口，使用此承载数据传输的用户平面协议（Nb UP）在3GPP TS 29.415 [3]中描述。采用IP传输的Nb接口的传输格式可选择性地允许RTP复用。注意，本文件并不排除MSC服务器和MGW合并实现的实现方式。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 19.0.0 Release 19)
本文件规定了CS核心网络中MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文件假设呼叫控制和承载传输及控制的分离实现，如3GPP TS 23.205 [1]中基于BICC的Nc和3GPP TS 23.231 [30]中基于SIP-I的Nc所规定的那样，参见图1。对于基于BICC的Nc，使用此承载数据传输（Nb UP）的用户平面协议在3GPP TS 29.415 [3]中描述。具有IP传输的Nb接口的传输格式可以可选地允许RTP复用。请注意，本文件不排除MSC服务器和MGW的组合实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 14.0.0 Release 14)
本文件规定了在CS核心网中，Nb接口上MGW之间使用的承载数据传输和承载控制协议。本文件假设实现呼叫控制与承载传输及控制的分离，如3GPP TS 23.205 [1]中基于BICC的Nc，以及3GPP TS 23.231 [30]中基于SIP-I的Nc（见图1）。对于基于BICC的Nc，使用该承载数据传输的承载平面协议（Nb UP）在3GPP TS 29.415 [3]中描述。Nb接口采用IP传输的传输格式可选择性地允许RTP复用。注意，本文件不排除MSC Server和MGW组合实现的实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (V14.0.0; 3GPP TS 29.414 version 14.0.0 Release 14)
本文档规定了在CS核心网内MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文档假设呼叫控制和承载传输与控制的分离实现，如3GPP TS 23.205 [1]中基于BICC的Nc和3GPP TS 23.231 [30]中基于SIP-I的Nc所规定。对于基于BICC的Nc，使用此承载数据传输（Nb UP）的用户平面协议在3GPP TS 29.415 [3]中描述。具有IP传输的Nb接口的传输格式可以选择允许RTP复用。请注意，本文档不排除MSC服务器和MGW的组合实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 18.0.0 Release 18)
The present document specifies the bearer data transport and bearer control protocols used between MGWs within the CS core network across the Nb Interface. The present document assumes that the implementation of the split of the call control and the bearer transport and control, as specified in 3GPP TS 23.205 [1] with BICC-based Nc, and in 3GPP TS 23.231 [30] with SIP-I based Nc,, see figure 1. For BICC-based Nc, the User Plane protocol that uses this bearer data transport (Nb UP) is described in 3GPP TS 29.415 [3]. The transport format for the Nb interface with IP transport can optionally allow RTP multiplexing. Note that the present document does not preclude an implementation of a combined MSC Server and MGW.
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 13.0.0 Release 13)
本文件规定了在CS核心网络中MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文件假设呼叫控制和承载传输与控制的分离实现，如3GPP TS 23.205 [1]中基于BICC的Nc和3GPP TS 23.231 [30]中基于SIP-I的Nc所规定。对于基于BICC的Nc，使用此承载数据传输(Nb UP)的用户平面协议在3GPP TS 29.415 [3]中描述。使用IP传输的Nb接口的传输格式可以可选地允许RTP多路复用。请注意，本文件不排除MSC服务器和MGW的组合实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 17.0.0 Release 17)
本文件规定了CS核心网内MGW之间通过Nb接口使用的承载数据传输和承载控制协议。本文件假设呼叫控制和承载传输与控制的分离实现，如3GPP TS 23.205 [1]（基于BICC的Nc）和3GPP TS 23.231 [30]（基于SIP-I的Nc）所规定，见图1。对于基于BICC的Nc，使用此承载数据传输（Nb UP）的用户平面协议在3GPP TS 29.415 [3]中描述。采用IP传输的Nb接口传输格式可选允许RTP复用。注意，本文件不排除MSC服务器和MGW组合的实现。
Universal Mobile Telecommunications System (UMTS); Core network Nb data transport and transport signalling (3GPP TS 29.414 version 9.0.0 Release 9)
