美利体育登录入口官网

在循环运动条件下弹性接合密封料的粘着性和粘结力的标准试验方法 (Hockman循环)

Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement 40;Hockman Cycle41;

钢轮胎帘线和橡胶之间粘结性的标准试验方法

Standard Test Method for Adhesion Between Steel Tire Cords and Rubber

橡胶性能的标准试验方法.与刚性基底的附着力

Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

拉伸膜剥离粘贴标准试验方法

Standard Test Method for Peel Cling of Stretch Wrap Film

测量原油和燃料油附着力的标准指南

Standard Guide for Measuring the Adhesion of Crude Oils and Fuel Oils

衬垫材料粘结到金属表面的粘附性的标准试验方法

Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces

F0607-垫片材料与金属表面附着力的标准测试方法

F0607- Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces

胶粘剂.地板和墙壁覆盖物用胶粘剂的试验方法.剪切试验

Adhesives. Test method for adhesives for floor and wall coverings. Shear test

自粘胶带 - 静态剪切粘合力的测量

Self adhesive tapes — Measurement of static shear adhesion

通过防护涂料系统对钢结构进行腐蚀保护 涂层附着力/内聚力（断裂强度）的评估及验收标准 划格试验和X形切割试验

Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing

造口术辅助器用皮肤屏障. 试验方法. 湿完整性和胶粘强度

Skin barrier for ostomy aids. Test methods. Wet integrity and adhesive strength

建筑物和土木工程 密封剂 使用珠剥离测试测试粘合性能

Buildings and civil engineering works. Sealants. Testing of adhesion properties using a bead peel test

热喷涂. 采用横向划痕试验评估热喷涂陶瓷涂层的粘结性/凝聚性

Thermal spraying. Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing

通过防护涂料系统对钢结构进行腐蚀保护 涂层附着力/内聚力（断裂强度）的评估及验收标准 第2部分：交叉切割测试和X形切割测试

Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 2: Cross-cut testing and X-cut testing

表面修整试验方法第3部分：通过维利特板冲击试验方法测定粘结剂骨料粘附力（草案）

Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the vialit plate shock test method

卷材涂覆金属.试验方法.第20部分:泡沫材料粘结性

Coil coated metals - Test methods - Part 20: Foam adhesion; German version EN 13523-20:2011

皮革.涂层粘牢度试验(ISO 11644-2009).英文版本DIN EN ISO 11644-2009-09

Leather - Test for adhesion of finish (ISO 11644:2009); English version of DIN EN ISO 11644:2009-09

防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评估和验收标准.第1部分:脱落测试

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); English version of DIN EN ISO 16276-1:

通过防护涂料系统对钢结构进行腐蚀保护 涂层的附着力/内聚力（断裂强度）的评估和验收标准 第1部分：拉脱测试

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); German version EN ISO 16276-1:2007

通过保护性涂料系统对钢结构进行腐蚀防护 涂层附着力/内聚力（断裂强度）的评估及验收标准 第2部分：交叉切割试验和X形切割试验（ISO 16276-2:2025）

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)

风筒涂覆布

Wind Tube Coating Fabric

一般用途高速公路. 阳离子乳化沥青道路. 使用水浸入试验测定沥青乳液的粘合性

General use highways. Cationic road bituminous emulsions. Method for determination of adhesivity with mineral materials

Morteros 抹灰层和饰面的粘结性试验方法

Mortars. Adherence test method for flooring and based plaster.

球墨铸铁配件, 附件及其接头和阀门. 环氧涂层

Ductile iron fittings, accessories and their joints and valves - Epoxy coating

涂料和清漆.粘附力撕开试验

Paints and varnishes - Pull-off test for adhesion

橡胶和塑料软管的测试方法.第6部分:部件间附着力的测定

Rubber and plastics hoses -- Part 6: Determination of adhesion between components

防腐蚀涂料体系对钢结构件的防护 干膜附着力和/或内聚力（剥离强度）的评估与验收准则 第2部分：划格法和划叉法试验（ISO 16276-2:2025）...

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)

硫化橡胶 与钢丝帘线粘附性的测定（第一次修订）（ISO 5603:2007, IDT）

RUBBER, VULCANIZED - DETERMINATION OF ADHESION TO WIRE CORD (FIRST REVISION) (ISO 5603:2007, IDT)

使用防护涂料系统对钢结构进行腐蚀防护 涂层附着力/内聚力（断裂强度）的评估及验收标准 第2部分：划格试验和X型切割试验

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing

路面试验 建筑防水材料 材料对底物粘性的测量 控制拉伸试验速度下的实验室或现场测试

Tests relating to pavement - Waterproofing materials for structures - Measurement of adherence of materials to the substrate - Laboratory or in-situ testing at controlled tensile test speed

采用防护性涂料系统对钢结构进行腐蚀保护 涂层附着力/内聚力（断裂强度）的评估及验收标准 第2部分：交叉切割试验和X型切割试验

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing

混凝土结构保护和修复产品和系统 试验方法 湿混凝土相容性

Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete

通过防护涂料系统对钢结构进行腐蚀防护 涂层附着力/内聚力（断裂强度）的评估及验收标准 第2部分：交叉切割试验和X形切割试验（ISO 16276-2:2025 IDT）

Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025, IDT)

色漆和清漆 涂层耐压力水射流性的测定（ISO 16925:2014）

Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)

胶粘剂 地板和墙覆面用胶粘剂的测试方法 庉试验（ISO 22631:2019）

Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)

利用防护涂料系统对钢结构进行防腐保护 涂层附着力/内聚力（抗断裂性）的评估和验收标准 第2部分：网格切割试验和试……

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)

通过涂装系统对钢结构进行防腐蚀保护 涂层附着力/内聚力（断裂力）的评估和可接受标准 第2部分：网格测试和X刻痕测试

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing