美利体育登录入口官网

沥青混合料平衡设计的标准实施规程

Standard Practice for Balanced Design of Asphalt Mixtures

石基质沥青 (SMA) 设计的标准实施规程

Standard Practice for Designing Stone Matrix Asphalt (SMA)

增强塑料空隙率的标准试验方法

Standard Test Methods for Void Content of Reinforced Plastics

开级配摩擦层（OGFC）沥青混合料设计的标准实施规程

Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design

岩石颗粒机械和物理性能试验.第3部分:体积密度和空隙测定

Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998

骨料机械和物理性能试验第3部分：松散堆积密度和空隙的测定

Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998

骨料机械和物理性能试验第4部分：干压实填料空隙率的测定

Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler; German version EN 1097-4:2008

沥青混合料 试验方法 第31部分：用旋转压实机制备试样

Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor

沥青混合物-试验方法-第45部分：饱和老化拉伸刚度（SATS）调节试验

Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test; German version EN 12697-45:2020

沥青混合物.热搅沥青混合料的试验方法.第8部分:沥青样件气穴数量的测定

Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of the air voids content of bituminous specimen; German version EN 12697-8:2003

沥青混合物-试验方法-第8部分：沥青样品空隙特性的测定

Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens; German version EN 12697-8:2018

沥青混合物.材料规范.第1部分:沥青混凝土.德文版本EN 13108-1-2016

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2016

沥青混合物.材料规范.第5部分:石头沥青砂胶.技术勘误DIN EN 13108-5-2006

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; German version EN 13108-5:2006; Corrigendum to DIN EN 13108-5:2006-08; German version EN 13108-5:2006/AC:2008

集聚纺纱用网格圈

Lattice apron compact spinning process

集聚纺纱用网格圈试验方法 第2部分：空隙率

Test methods for mesh rings for compact spinning - Part 2: Porosity

电气绝缘用薄膜 第2部分：试验方法

Plastic films for electrical purposes—Part 2: Methods of test

一般用途汽车道路. 天然砂和碎砂. 体积密度和虚空度的测定

Automobile roads of general use. Natural and crushed sand. Determination of bulk density and emptiness

一般用途的汽车道路 用于制备沥青混合料的矿物材料 体积功能设计系统 压实后粗骨料堆积密度和空隙度的测定方法

Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Volumetric-functional design system. Method for determination of bulk density and emptiness of coarse aggregate after compaction

复合材料构件通用技术条件

General technical requirements for composite components

碳纤维增强复合材料 树脂、纤维和孔隙含量的测定

Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents

填料机械和物理特性测定方法 第3部分 堆积密度和孔隙度测定

Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids

有关路面的试验 沥青混合物的静态试验 第4部分：基于冷混沥青的乳化沥青的改良杜利埃试验

Tests relating to pavements - Static tests on bituminous mixtures - Part 4 : modified DURIEZ test on bitumen emulsion based cold mix asphalts

集料的力学和物理性能试验 第4部分：干燥压密填充物空隙率的测定

Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler