美利体育登录入口官网

使用旋转平台研磨机进行磨损试验的标准指南

Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

测试涂层织物 第24部分：方法 27A 和 27B. 耐磨性测定方法

Testing coated fabrics — Part 24 : Methods 27A and 27B.Methods for determination of abrasion resistance

瓷砖用水泥浆.耐磨损性的测定

Grouts for tiles - Part 2:Determination of resistance to abrasion

民用爆炸物 导爆索和导火索 导爆索耐磨性能的验证

Explosives for civil uses. Detonating cords and safety fuses - Verification of resistance to abrasion of detonating cords

骨料机械和物理性能试验 第1部分：耐磨性的测定（micro-Deval）

Tests for mechanical and physical properties of aggregates — Part 1: Determination of the resistance to wear (micro-Deval)

找平材料的试验方法 第3部分：耐磨性测定-BOEHME（草案）

Methods of test for screed materials - Part 3: Determination of wear resistance - Bohme

瓷砖.第11部分:无釉砖耐磨深度测量

Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010); German version EN ISO 10545-6:2012

釉瓷和搪瓷.耐磨性测定.第2部分:次表面磨损后的质量损失(ISO 6370-2-2011)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011)

输电线路金具磨损试验方法

Test Method for Wear of Transmission Line Hardware

金属材料 磨损试验方法 试环 试块滑动磨损试验

Metallic materials Wear test method Block on ring sliding wear test

激光修复层高温摩擦磨损性能试验 球-盘法

High-temperature friction and wear performance test of laser repair layer Ball-disk method

用于接缝砂浆（填充材料） 耐磨性测定

Mortars for joints. Grouts. Determination of abrasion resistance.

沥青混合料 冷沥青砂浆和微集料 (MAF) 第1部分：耐磨试验

Bituminous mixtures. Asphalt slurries and cold microagglomerates. Part 1 - Test track abrasión.

涂料和清漆. 耐磨性的测定. 第3部分: 使用研磨纸覆盖轮和直线往复试样的方法

Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

制动摩擦材料惯性试验台磨损试验方法

Wear test procedure on inertia dynamometer for brake friction materials

金属镀层的耐磨性试验方法

Methods of wear resistance test for metallic coatings

混凝土 试验方法 第15部分：耐磨性测定

Concrete. Test methods - Part 15: Determination of wear resistance

工程用炸药 爆破绳和导火索 第5部分 爆破绳耐磨性测试

Explosives for civil uses - Detonating cords and safety fuses - Part 5: Verification of resistance to abrasion of detonating cords

民用爆炸品 引爆索和安全导火索 第5部分：引爆索耐磨性能的验证

Explosives for civil uses - Detonating cords and safety fuses - Part 5 : verification of resistance to abrasion of detonating cords

民用炸药 引爆索和安全导火索 第5部分：引爆索耐磨性能的验证

Explosives for civil uses - Detonating cords and safety fuses - Part 5 : verification of resistance to abrasion of detonating cords

水轮机过流部件磨损试验方法

Wear test method of turbine flow parts

混凝土测试 抗磨损混凝土 磨蚀抵抗性

Concrete testing - Hardened concrete - Abrasion resistance

民用爆破器材 引爆索和导火索 第5部分：引爆索抗磨损性能的验证

Explosives for civil uses — Detonating cords and safety fuses — Part 5: Verification of resistance to abrasion of detonating cords

硬质合金 硬质合金的耐磨试验（ISO 28080:2021）

Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)

民用爆炸物 起爆线和安全导火线 第5部分：起爆线耐磨性的验证 （经西班牙标准化协会于2026年1月批准 ）

Explosives for civil uses - Detonating cords and safety fuses - Part 5: Verification of resistance to abrasion of detonating cords (Endorsed by Asociación Espa?ola de Normalización in January of 2026.)

民用炸药 激发雷管和安全雷管 第5部分：引爆雷管的耐磨性测定

Explosives for civil uses - Detonating cords and safety fuses - Part 5: Verification of resistance to abrasion of detonating cords

铝用阴极炭块磨损试验方法

Abrasion method of cathode blocks used in the production of aluminium

外科植入物 全髋关节假体的磨损 第2部分：测量方法

Implant for surgery.Wear of total hip-joint prostheses.Part 2:Methods of measurement