由块体材料(砖石等)和砂浆砌筑而成的建筑结构体系。具有取材方便、耐火性好等特点,其力学性能与砌筑工艺密切相关。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ACI 530.1-05 (TMS 602-05) ASCE 6-2005 规范 |
砌体结构规范和注释(ASCE 6-99/TMS 602-99) Specification for Masonry Structures and Commentary (ASCE 6-99/TMS 602-99)
灌浆 预应力筋 |
2004-10-27 美国混凝土学会 |
| ACI 549.6R-2020 指南标准 |
用于维修和加固砌体结构(IN-LB单位和SI单位)的外部粘结织物增强水泥基(FRCM)和钢加固灌浆(SRG)系统的设计和施工指南 Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) and Steel-Reinforced Grout (SRG) Systems for Repair and Strengthening Masonry Structures (IN-LB Units and SI Units)
|
2020-11-01 美国混凝土学会 |
| ACI PRC-440.7-22 指南标准 |
Externally Bonded Fiber-Reinforced Polymer Systems Design and Construction for Strengthening Masonry Structures—Guide
|
2022-12 美国混凝土学会 |
| AS 3700-2018 Sup 1:2020 规范 |
Masonry structures
砌体 补充文件 |
2020 澳大利亚标准协会 |
| AS/NZS 2699.1:2000 规范 |
Built-in components for masonry construction - Wall ties
耐久性分类 |
2000-1-1 澳大利亚/新西兰标准 |
| AS/NZS 2699.1:2020 规范标准 |
Built-in components for masonry construction – Part 1: Wall ties
|
2025-10-24 新西兰标准局 |
| ASTM C270-14a Specification |
Standard Specification for Mortar for Unit Masonry
|
2014 美国材料与试验协会 |
| ASTM C270-19ae1 规范 |
Standard specification for mortar for masonry blocks
|
2019 美国材料与试验协会 |
| ASTM C476-10 Specification |
Standard Specification for Grout for Masonry
|
2010 美国材料与试验协会 |
| ASTM C476-16 Specification |
Standard Specification for Grout for Masonry
|
2016-07-15 美国材料与试验协会 |
| ASTM C476-23 试验规范 |
Standard Specification for Grout for Masonry
|
2023-02-01 美国材料与试验协会 |
| ASTM C980-10 Specification |
Standard Specification for Industrial Chimney Lining Brick
|
2010 美国材料与试验协会 |
| ASTM E514/E514M-20 试验方法 |
Standard Test Method for Water Penetration and Leakage Through Masonry
水渗透 |
2020-12-01 美国材料与试验协会 |
| BS EN 1996-1-2:2005 |
Eurocode 6. Design of masonry structures - General rules - Structural fire design
承重墙 |
2005-06-30 英国标准学会 |
| BS EN 1996-1-2:2005/NA:2007(2015) 规范标准 |
欧洲规范 6:砌体结构设计 第1-2部分:一般规则 – 结构防火设计 Eurocode 6 : Design of masonry structures – Part 1 - 2 : General rules – Structural fire design
耐火等级 |
2015-01-01 英国标准学会 |
| BS EN 1996-1-2:2024 规范 |
Eurocode 6. Design of masonry structures - Structural fire design
防火设计 |
2024-10-31 英国标准学会 |
| BS EN 1996-2:2006(2010) 规范 |
欧洲规范 6:砌体结构设计 第2部分:设计考虑因素、材料选择和砌体施工 Eurocode 6 — Design of masonry structures — Part 2 : Design considerations, selection of materials and execution of masonry
材料选择 |
2010-01-01 英国标准学会 |
| BS EN 1996-2:2024 规范 |
Eurocode 6. Design of masonry structures - Design considerations, selection of materials and execution
材料选择 |
2024-10-31 英国标准学会 |
| BS EN 1996-3:2023 规范 |
跟踪更改 欧洲规范 6 砌体结构设计 无筋砌体结构简化计算方法 Tracked Changes. Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
简化计算方法 |
2023-01-01 英国标准学会 |
| CECS 257-2009 规范 |
Technical code for concrete brick masonry structures building
抗震设计 |
2009-06-01 行业标准-工程建设推荐性标准 |
| CSA S304-2014(R2019) 规范标准 |
Design masonry structures
砌体单元 |
2019 加拿大标准协会 |
| CSA S304-2024 规范 |
Design of Masonry Structures
|
2024-04-19 加拿大标准协会 |
| DANSK DS/EN 1996-3:2023 |
欧洲规范 6 砌体结构设计 第3部分:无筋砌体结构的简化计算方法 Eurocode 6 – Design of masonry structures – Part 3: Simplified calculation methods for unreinforced masonry structures
简化计算方法 |
2023-12-07 丹麦标准化协会 |
| DB21/T 1366-2005 规程 |
Technical regulations for external thermal insulation sandwich walls
|
2005-01-01 辽宁省标准 |
| DB37/ 5090-2017 规范 |
Technical specification for autoclaved lime-sand brick masonry
抗震设计 |
2017-03-20 山东省地方标准 |
| DB37/T 5191-2021 规范 |
High ductility concrete strengthening technical specification
混凝土结构 |
2021-08-10 山东省地方标准 |
| DB64/T 1875-2023 规范 |
Reinforcement and reconstruction of earthquake-resistant livable farm buildings and technical regulations for new construction
|
2023-02-21 宁夏回族自治区标准 |
| DB65/T 8004-2023 规范 |
Technical standards for rural housing construction
|
2023-09-19 新疆维吾尔自治区标准 |
| DIN 20000-403 E:2019-04 规范 |
建筑产品在结构中的应用 第403部分:根据 DIN EN 771-3 骨料混凝土砌块(致密和轻骨料)的应用规则 Application of building products in structures - Part 403: Rules for the application of aggregate concrete masonry units (dense and lightweight aggregates) according to DIN EN 771-3:2015-11
混凝土砌块 |
2019-04 德国标准化学会 |
| DIN 20000-403:2019-11 应用规范 |
建筑产品在结构中的应用 第403部分:根据 DIN EN 771-3:2015-11 骨料混凝土砌块(致密和轻骨料)的应用规则 Application of building products in structures - Part 403: Rules for the application of aggregate concrete masonry units (dense and lightweight aggregates) according to DIN EN 771-3:2015-11
混凝土砌块 设计值 |
2019-11 德国标准化学会 |
| DIN 4223-101 E:2008-09 规范 |
加气高压混凝土的预制加强构件的应用 第101部分:设计和计算 Application of prefabricated reinforced components of autoclaved aerated concrete - Part 101: Design and calculation
|
2008-09 德国标准化学会 |
| DIN EN 1996-1-1 NA A1 E:2013-07 规范 |
National Annex - Nationally determined parameters - Part 1-1: General rules for reinforced and unreinforced masonry structures; Amendment A1
|
2013-07-08 德国标准化学会 |
| DIN EN 1996-1-1 NA A3 E:2019-07 规程 |
欧洲规范6: 墙体结构的设计 第1-1部分:钢筋和非钢筋墙体的一般规则 修正案A3 Eurocode 6: Design of wall structures Part 1-1: General rules for reinforced and unreinforced walls Amendment A3
国家参数 砌块 |
2019-07 德国标准化学会 |
| DIN EN 1996-1-1 NA/A1:2014 规范 |
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures; Amendment A1
|
2014-03-01 德国标准化学会 |
| DIN EN 1996-1-1 NA/A2:2015 规范 |
Eurocode 6-1-1 Design and construction of protective masonry Part 1 Second edition
国家参数 |
2015 德国标准化学会 |
| DIN EN 1996-1-1 NA:2012 规范 |
国家附录 – 国家确定的参数 – 欧洲规范 6:砌体建筑的设计和施工 – 第 1-1 部分:钢筋和非钢筋砌体的一般规则 National Annex – Nationally determined parameters – Eurocode 6: Design and construction of masonry buildings – Part 1-1: General rules for reinforced and unreinforced masonry
非矛盾补充信息 |
2012 德国标准化学会 |
| DIN EN 1996-1-1-NA E:2011-04 规范 |
国家附录国家确定的参数欧洲规范 6:砌体建筑的设计和施工 第1部分:钢筋和非钢筋砌体的一般规则(草案) National Annex – Nationally determined parameters – Eurocode 6: Design and construction of masonry buildings – Part 1-1: General rules for reinforced and unreinforced masonry
砌块 |
2011-04 德国标准化学会 |
| DIN EN 1996-1-1-NA Entwurf:2011 规范 |
欧洲规范6:砌体结构的设计 - 第1-1部分:钢筋和不设筋砌体结构的一般规则 Eurocode 6: Design of masonry structures – Part 1-1: General rules for reinforced and unreinforced masonry structures National Annex – Nationally determined parameters
非矛盾补充信息 |
2011-04 德国标准化学会 |
| DIN EN 1996-1-1-NA:2012 规范 |
国家附录国家确定的参数欧洲规范 6:砌体建筑的设计和施工 第1部分:钢筋和非钢筋砌体的一般规则 National Annex – Nationally determined parameters – Eurocode 6: Design and construction of masonry buildings – Part 1-1: General rules for reinforced and unreinforced masonry
非矛盾补充信息 |
2012-05-01 德国标准化学会 |
| DIN EN 1996-1-1/NA/A1:2014 规范 |
国家附录.国家规定参数.欧洲规范6:砌体结构设计.第1-1部分:钢筋和无筋砌体的一般规则.修改件A1 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures; Amendment A1
|
2014-03 德国标准化学会 |
| DIN EN 1996-1-1/NA:2012 规范 |
国家附录.国家规定参数.欧洲规范6:砌体结构设计.第1-1部分:钢筋或无钢筋砌体结构的一般规则 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
非矛盾补充信息 |
2012-01 德国标准化学会 |
| DIN EN 1996-1-1/NA:2019-12 规范 |
国家附录 国家确定的参数 欧洲规范 6:砌体结构设计 第1-1部分:加筋和非加筋砌体结构的一般规则 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures / Note: Applies in conjunction with DIN EN 1996-1-1 (2013-02).
砌体 |
2019-12 德国标准化学会 |
| DIN EN 1996-1-1:2013 规范 |
欧洲法规6: 砌体结构设计. 第1-1部分: 钢筋和无钢筋砌体结构的一般规则; 德文版本EN 1996-1-1-2005+A1-2012 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures; German version EN 1996-1-1:2005+A1:2012
正常使用极限状态 |
2013-02 德国标准化学会 |
| DIN EN 1996-1-1:2013-02 规范 |
欧洲规范 6:砌体结构设计 第1-1部分:钢筋和非钢筋砌体结构的一般规则 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures; German version EN 1996-1-1:2005+A1:2012 / Note: To be replaced by DIN EN 1996-1-1 (2019-09).
材料性能 设计基准 |
2013-02 德国标准化学会 |
| DIN EN 1996-1-2 2011-04(2) 规范 |
Eurocode 6: Design of masonry structures — Part 1-2: General rules — Structural fire design
耐火极限 |
2011-04 德国标准化学会 |
| DIN EN 1996-1-2/NA:2022 规范 |
国家附录 国家确定的参数 欧洲规范 6:砌体结构设计 第 1-2 部分:一般规则 结构防火设计 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
耐火性能 |
2022-09-01 德国标准化学会 |
| DIN EN 1996-1-2:2011 规范 |
欧洲法规6:圬工结构的设计.第1-2部分:一般规则.防火结构设计.德文版本EN 1996-1-2-2005 + AC-2010 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design; German version EN 1996-1-2:2005 + AC:2010
火灾设计 耐火极限 |
2011-04 德国标准化学会 |
| DIN EN 1996-1-2:2022 |
欧洲规范 6 砌体结构设计 第 1-2 部分:一般规则 结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design; German and English version prEN 1996-1-2:2022
材料性能 |
2022-10-01 德国标准化学会 |
| DIN EN 1996-1-2:2022-10 规范 |
欧洲规范 6 砌体结构设计 第1-2部分:一般规则 结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design; German and English version prEN 1996-1-2:2022 / Note: Date of issue 2022-09-02*Intended as replacement for DIN EN 1996-1-2 (2011-04).
材料性能 |
2022-10 德国标准化学会 |
| DIN EN 1996-2 NA A-1 E:2020-12 规范 |
砌体结构设计 第2部分:设计考虑因素,材料选择及执行;修改1版 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry; Amendment 1
国家参数 |
2020-11-06 德国标准化学会 |
| DIN EN 1996-2-NA E:2011-04 规范 |
National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 2
|
2011-03-21 德国标准化学会 |
| DIN EN 1996-2-NA Entwurf:2011 规范 |
欧盟标准EN 1996-2及其修订案:用于砌体建筑的设计与建造 - 第2部分:设计考量、建筑材料的选择及砌筑工程 Eurocode 6: Design of masonry structures – Part 2: National annexes for Germany; German national annex to Eurocode 6 Part 2
|
2011-04-01 德国标准化学会 |
| DIN EN 1996-2-NA:2012 规范 |
混凝土结构—第二部分:预应力混凝土结构的国家应用注释和补充信息 Concrete structures - Part 2: National application provisions and additional information for pre-stressed concrete structures
|
2012-01-01 德国标准化学会 |
| DIN EN 1996-2/NA/A1:2021 规范 |
国家附录 国家确定的参数 欧洲规范 6:砌体结构设计 第2部分:设计考虑、材料选择和砌体施工;修正案 1 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry; Amendment 1
非矛盾补充信息 |
2021-06-00 德国标准化学会 |
| DIN EN 1996-2/NA:2012 规范 |
国家附件.国家确定的参数.欧洲法规6:砌体结构设计.第2部分:设计考虑,材料的选择和石造建筑施工 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
|
2012-01 德国标准化学会 |
| DIN EN 1996-2/NA:2012-01 规范 |
国家附录 国家确定的参数 欧洲规范 6:砌体结构设计 第2部分:设计考虑因素、材料选择和砌体施工 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry / Note: Applies in conjunction with DIN EN 1996-2 (2010-12).*To be amended by ...
|
2012-01 德国标准化学会 |
| DIN EN 1996-2:2010 规范 |
欧洲规范6:混凝土结构设计.第2部分:设计考虑,材料选择和砌体施工;德文版本EN 1996-2-2006 + AC-2009 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry; German version EN 1996-2:2006 + AC:2009
|
2010-12 德国标准化学会 |
| DIN EN 1996-2:2010-12 规范 |
欧洲规范 6:砌体结构设计 第2部分:设计考虑因素、材料选择和砌体施工 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry; German version EN 1996-2:2006 + AC:2009 / Note: To be replaced by DIN EN 1996-2 (2022-10).
砌块 |
2010-12 德国标准化学会 |
| DIN EN 1996-3 NA A2 E:2014-08 规范 |
欧洲结构规范 第6部分:砌体结构的设计 第3部分:非加固砌体结构的简化计算方法 修正案 A2 Eurocode Part 6: Design of masonry structures Part 3: Simplified calculation methods for unreinforced masonry structures Amendment A2
国家参数 简化计算方法 |
2014-08 德国标准化学会 |
| DIN EN 1996-3 NA/A1:2014 规范 |
欧标第6部分:砌体结构设计 - 第三部分:无筋砌体的简化计算方法;修正案A1 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures; Amendment A1
|
2014-03 德国标准化学会 |
| DIN EN 1996-3/NA/A1:2014 试验 |
国家附录. 国家制定参数. 欧洲规范6:砌体结构设计. 第3部分:无钢筋砌体结构简化计算方法; 修改件A1 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures; Amendment A1
|
2014-03 德国标准化学会 |
| DIN V ENV 1996-1-1:1996-12 规范 |
欧洲规范6:砌体结构设计 第1-1部分:建筑通用规则 加筋与非加筋砌体规则 Eurocode 6: Design of masonry structures - Part 1-1: General Rules for buildings, Rules for reinforced and unreinforced masonry
承重墙 砌体 |
1996-12-01 德国标准化学会 |
| DIN V ENV 1996-1-2:1997-05 规范 |
欧标 Eurocode 6 砌体结构的设计 第1-2部分:一般规则—结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules — Structural fire design
火灾荷载 耐火极限 |
1997-05-01 德国标准化学会 |
| DIN V ENV 1996-1-3:1999-08 规范 |
欧洲规范6 墙体建筑的设计 第1-3部分:通用规则 水平荷载的详细规则 Eurocode 6 Design of wall structures Part 1-3: General rules Detailed rules for horizontal loads
|
1999-08 德国标准化学会 |
| DIN V ENV 1996-2:2001-09 规范 |
Eurocode 6 砌体结构设计—第二部分:设计, 材料选择及执行 Eurocode 6: Design of masonry structures - Part 2: Design, selection of materials and execution of masonry; German version ENV 1996-2: 1998
|
1998-11-01 德国标准化学会 |
| GB 50003-2011 规范 |
Code for design of masonry structures
混凝土砌块 |
2011-07-26 国家住房和城乡建设部 |
| GB 50203-2011 规范 |
Code for acceptance of constructional quality of masonry structures
|
2011-02-18 国家住房和城乡建设部 |
| GB 50702-2011 规范 |
Code for design of strengthening masonry structures
纤维复合材料 |
2011-07-26 国家住房和城乡建设部 |
| GB 55007-2021 |
General specification for masonry structures
|
2021-4-9 国家住房和城乡建设部 |
| GB/T 2992.2-2014 规范 |
Dimensions of refractory bricks.Part 2:Terminology for shapes and brickworks of refractory bricks
耐火砖 |
2014-06-09 国家市场监督管理总局 |
| JGJ 117-1998 规程 |
Specification for examination and design of repairing work of civil buildings
混凝土结构 |
1998-09-14 行业标准-建筑工业 |
| JGJ/T 112-2019 规程标准 |
Construction standards for civil building repair works
民用建筑 |
2020-01-08 行业标准-建筑工业 |
| JGJ/T 293-2013 规程 |
Technical specification for application of silt perforated bricks
|
2013-05-13 行业标准-建筑工业 |
| LST EN 1996-1-2:2024 |
欧洲规范6:砌体结构设计 第1-2部分:火灾下的结构行为设计(自2027年9月30日起适用于设计) Eurocode 6 - Design of masonry structures - Part 1-2: Structural fire design
防火设计 |
2024-11-29 立陶宛标准局 |
| LST EN 1996-2:2006 规范 |
Eurokodas 6:砌体结构设计 第2部分:设计前提、材料选择及砌体施工 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
|
2006-06-09 |
| LST EN 1996-2:2024 |
欧洲规范 6:砌体结构的设计 第二部分:设计依据、材料选择及施工(将于 2027 年 9 月 30 日起适用于设计) Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution
材料选择 |
2024-11-29 立陶宛标准局 |
| LST EN 1996-3:2006 规范 |
欧罗科德6. 砌体结构的设计 第3部分:无筋砌体结构简化的计算方法 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
计算方法 |
2006-06-09 |
| LST EN 1996-3:2023 |
欧洲规范 第6部分:砌体结构的设计 第3部分:无筋砌体结构简化计算方法(自2027年9月30日起实施) Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
简化计算方法 |
2023-12-29 立陶宛标准局 |
| NZS 4210:2001 规范 |
Masonry Construction: Materials and Workmanship (Incorporating Amendment 1: 05/2002)
灌浆 |
2001-05-31 新西兰标准局 |
| PD 6697:2019 指南标准 |
符合 BS EN 1996-1-1 和 BS EN 1996-2 的砖石结构设计建议 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
|
2019-07-19 英国标准学会 |
| SS-EN 1996-1-2:2005 试验 |
欧洲规范6 砌体结构设计 第一部分 第二部分: 通用规则 结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
|
2005 瑞典标准研究所 |
| SS-EN 1996-1-2:2024 规范标准 |
Eurocode 6: Design of masonry structures — Part 1-2: Structural fire design
耐火性能 防火设计 |
2024 瑞典标准研究所 |
| SS-EN 1996-2:2006 规范 |
欧洲规范6部分2条:砌体结构的设计 第二部分:设计考虑、材料的选择和砌体的施工 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
材料选择 设计考虑 |
2006 瑞典标准研究所 |
| SS-EN 1996-3:2024 规范标准 |
欧洲规范6 砌体结构设计 第三部分:非加固砌体结构的简化计算方法 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
简化计算方法 |
2024 瑞典标准研究所 |
| TB 10002.4-2005 规范 |
Code for design on concrete and block masonry structure of railway bridge and culvert
混凝土结构 |
2005-06-14 行业标准-铁道 |
| UNE-EN 1996-1-2:2011 试验标准 |
欧洲规范 6 砌体结构设计 第 1-2 部分:一般规则 结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
耐火性能 防火设计 |
2011-12-28 西班牙标准化协会 |
| UNE-EN 1996-2:2011 规范 |
欧洲规范 6 砌体结构设计 第2部分:设计考虑、材料选择和砌体施工 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
砌体单元 |
2011-12-28 西班牙标准化协会 |
| UNI EN 1996-1-2:2024 |
Eurocode 6 - Design of masonry structures - Part 1-2: Structural fire design
防火设计 |
2024-11-07 意大利统一标准化组织 |
| UNI EN 1996-2:2024 |
欧洲规范 6 砌体结构设计 第2部分:设计考虑、材料选择和施工 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution
材料选择 |
2024-11-07 意大利统一标准化组织 |
| UNI EN 1996-3:2024 |
欧洲规范 6-砌体结构设计 第3部分:无筋砌体结构的简化计算方法 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
简化计算方法 |
2024-08-01 意大利统一标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-05-31 02:42