美利体育登录入口官网

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Reaction to fire tests for floor coverings - Determination of the burning behaviour using a radiant heat source

防热防火防护服 第1部分：整套服装的试验方法 使用仪表化人体模型测量传输能量

Protective clothing against heat and flame, Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin

防热防火防护服 第2部分：皮肤烧伤预测 计算要求和测试用例

Protective clothing against heat and flame, Part 2: Skin burn injury prediction - Calculation requirements and test cases

地下送气充气的测试与建模

Testing and Modeling of Underfloor Air Supply Plenums

在役管道硬度评估确定屈服强度的应用指南

Application Guide for Determining Yield Strength of In-Service Pipeline Hardness Evaluation

使用护热板美利体育官网首页网址测量稳态热通量和热传导特性的标准试验方法

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

用防护热板装置测量稳态热通量和热传输特性的标准试验方法

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

测定传热条件下冷却水腐蚀和结垢性的标准试验方法

Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

使用嵌装温度梯度表测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

使用嵌入式温度梯度计测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

采用定向火焰温度计和现金数据分析技术测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques

采用先进数据分析技术的定向火焰温度计测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques

用水冷热量计测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

使用水冷热量计测量热通量的标准试验方法

Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

用瞬变零点量热器测量高能环境的超级传热速率的方法

Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

表面接触热的防护服的热防护性能的标准试验方法

Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

评定传导和压缩耐热性的标准试验方法

Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)

耐火服装材料的抗辐射热性能用标准试验方法

Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials

用连续加热测定防火服装材料的防热辐射的标准试验方法

Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating

现场焚烧溢油的标准指南：防火围油栏

Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom

表面保护产品电弧额定值测定的标准试验方法

Standard Test Method for Determining The Arc Rating Of Face Protective Products

用于连续加热的衣服的耐火材料的不稳定状态传热评估的标准测试方法

Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating

评估阻燃服装材料的辐射热性能进行烧伤预测的标准试验方法

Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction

通过接触带熔态物质的防护衣材料评估热传递的标准试验方法

Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances

建筑能耗 供暖、通风、空调和生活热水分配系统能效要求 第1部分：计算方法

Energy performance of buildings — Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems — Part 1: Calculation procedures

建筑物能源性能.系统能量要求和系统功效的计算方法.第3部分:空间分布系统（DHW, 加热和冷却），模块M3-6, M4-6, M8-6

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies. - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6

建筑环境设计 嵌入式辐射加热和冷却系统的设计、尺寸、安装以及控制 设计供热和制冷能力的测定

Building environment design. Embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity

建筑环境设计. 嵌入式辐射加热和冷却系统的设计, 尺寸, 安装以及控制. 设计和尺寸

Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning

防热和防火防护服.第1部分:完整服装的试验方法.用装备仪器的假人对转移能量的测量

Protective clothing against heat and flame. Test method for complete garments. Measurement of transferred energy using an instrumented manikin

防护服防止热与火 第2部分:皮肤烧伤损伤预测 计算要求和试验案例

Protective clothing against heat and fire - Part 2: Calculation requirements and test cases for the prediction of skin burn injuries

地板防火反应测试 使用辐射热源测定燃烧行为

Reaction to fire tests for floorings - Determination of the burning behaviour using a radiant heat source

建筑物的能源性能 供暖、制冷和生活热水（DHW）分配系统的能源需求和效率 计算程序

Energy performance of buildings. Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems - Calculation procedures

对火焰试验的反应.直接接触火焰的建筑产品的着火性.着火性指南

Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Guidance on ignitability

建筑能源性能 供暖、制冷和生活热水 (DHW) 分配系统的能源需求和效率 第1部分：计算程序

Energy performance of buildings – Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems – Part 1: Calculation procedures

地板防火性能测试反应 第1部分：使用辐射热源测定燃烧行为

Reaction to fire tests for floorings – Part 1: Determination of the burning behaviour using a radiant heat source

航空航天系列电气和光学连接元件试验方法第326部分：火浸试验

Aerospace series - Elements of electrical and optical connection - Test methods - Part 326: Fire immersion test; German and English version EN 2591-326:2018 / Note: Applies in conjunction with DIN EN 2591-100 (2018-10).

带电作业 防护服 防止电弧热：

Live working – Protective clothing against the thermal hazards of an electric arc

建筑环境设计 嵌入式辐射供暖和制冷系统 第3部分：设计和尺寸标注（ISO/DIS 11855-3:2020）

Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO/DIS 11855-3:2020); German and English version prEN ISO 11855-3:2020

地板防火测试反应 第1部分：使用辐射热源测定燃烧行为（ISO 9239-1:2025） 德文版本 EN ISO 9239-1:2025

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2025); German version EN ISO 9239-1:2025

火焰在垂直表面的横向蔓延试验方法

Test method for lateral spread of flame on building and transport products in vertical configuration

建筑能源性能 供暖、制冷和生活热水 (DHW) 分配系统的能源需求和效率 第1部分：计算程序

Energy performance of buildings — Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems — Part 1: Calculation procedures

地板覆盖物对火反应试验.第1部分:使用辐射热源的燃烧性能测定

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source

地板防火性能测试反应 第1部分：使用辐射热源测定燃烧行为

Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source

地板防火试验-第2部分：在25kW/m2热通量水平下火焰蔓延的测定

Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2

地面材料对火反应的试验.第2部分:热流量级别为25kW/m<上标2>时火焰传播性测定

Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m<(hoch)2>

对火反应试验 火焰直接接触建筑制品的点燃性 第1部分:点燃性指南

Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 1: Guidance on ignitability

建筑物能耗特性 系统能耗需求与系统性能计算方法 第3部分 室内分配系统（生活热水、供暖和制冷） M3-6、M4-6、M8-6模块

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6

建筑物内部环境设计 嵌入式辐射供暖和制冷系统 第2部分：供暖和制冷功率的确定（ISO 11855-2:2021）

Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2021)

地板涂层反应测试 第1部分：利用辐射热源确定燃烧特性 (ISO 9239-1:2025)

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239?1:2025)

防热防火防护服 第2部分：皮肤烧伤预测 计算要求和试验案例

Protective clothing against heat and flame - Part 2 : skin burn injury prediction - Calculation requirements and test cases

地板防火性能测试反应 第1部分：使用辐射热源测定燃烧行为

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source

建筑物的能源性能 系统能源需求和系统效率计算方法 第3部分：空间分布系统（生活热水、供暖和制冷） 模块M3-6、M4-6、M8-6

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6

建筑环境设计 嵌入式辐射供暖和供冷系统 第2部分：设计供暖和供冷能力的确定（ISO 11855-2:2021）

Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2021)

建筑环境设计 嵌入式辐射供暖和制冷系统的设计、尺寸、安装和控制 第3部分：设计和尺寸（ISO 11855-3:2012）

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)

塑料 烟雾产生 第2部分:用单室试验测定光密度（ISO 5659:1994 包括技术勘误表 1:1997）

Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659:1994, including Technical Corrigendum 1:1997)

Flooring 表面材料 对火反应试验 第一部分：使用辐射热源确定燃烧行为（ISO 9239-1:2010）

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)

窗户组件安全防火测试 UL 标准

UL Standard for Safety Fire Tests of Window Assemblies

耐热和火焰防护服 第1部分：整套服装的测试方法 使用仪器化人体模型测量传输能量

Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017) (Endorsed by Asociación Espa?ola de Normalización in November of 2017.)

地板火灾反应测试 第1部分：使用辐射热源评估火灾行为

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source