美利体育登录入口官网

采用热流计仪器法测定稳态热传递特性的标准试验方法

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

热传递条件下冷却水腐蚀和结垢趋势测定的标准试验方法

Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

使用嵌入式温度梯度计测量热通量的标准测试方法

Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

使用仪表人体模型进行火灾模拟评估阻燃服装的标准测试方法

Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin

衬垫材料的导热性评定的标准实施规程

Standard Practice for Evaluating Thermal Conductivity of Gasket Materials

衬垫材料的导热性评定的标准实施规程

Standard Practice for Evaluating Thermal Conductivity of Gasket Materials

高级工业陶瓷.陶瓷复合材料.热物理性能.热传导性的测定

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal conductivity

增强热固性模塑化合物.模压塑料板材(SMC)和模塑料块(BMC)的规范.特殊要求

Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Specific requirements

塑料.酚醛粉末模塑化合物(PF-PMCs).试样的制备和特性测定

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Preparation of test specimens and determination of properties

试样制备和特性测定

Preparation of test specimens and determination of properties

塑料 导热系数和热扩散系数的测定 第1部分：一般原则

Plastics — Determination of thermal conductivity and thermal diffusivity Part 1: General principles

塑料 热导率和热扩散率的测定 第1部分：一般原则

Plastics – Determination of thermal conductivity and thermal diffusivity – Part 1: General principles

高级技术陶瓷 陶瓷复合材料 热物理性能 第4部分：热导率的测定

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity

高级工业陶瓷.陶瓷复合物.热物理性能.第4部分:热导性的测定

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004

先进技术陶瓷 陶瓷复合材料 热物理性能 第4部分：导热系数的测定

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004

金属和其他无机涂层-温度梯度下热障涂层循环加热的试验方法

Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011); German version EN ISO 13123:2011

塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:试样的制备和性能的测定

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999

塑料 酚醛粉末模塑料（PF-PMC） 第2部分：测试样品的制备和性能测定

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999

塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:试样的制备和特性的测定

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999

塑料 脲醛和脲/三聚氰胺甲醛粉末模塑料（UF-和UF/MF-PMC） 第2部分：测试样品的制备和性能测定

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999

塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:试样准备和特性测定

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999

塑料-三聚氰胺-甲醛粉末模塑料（MF-PMC）-第2部分：测试样品的制备和性能的测定

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999

塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:试样的制备和特性的测定

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999

塑料-三聚氰胺/酚醛粉末模塑料（MP-PMC）-第2部分：测试样品的制备和性能的测定

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999

塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第2部分:试样制备和特性测定

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999

塑料 - 不饱和聚酯粉末模塑料 (UP-PMC) - 第 2 部分：测试样品的制备和性能测定 (ISO 14530-2:1999)

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999

塑料.环氧树脂粉末模塑化合物(EP-PMCs).第2部分:试样的制备和特性的测定

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999

塑料 环氧粉末模塑料（EP-PMC） 第2部分：测试样品的制备和性能测定

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999

塑料 热导率和热扩散率的测定 第1部分：一般原则 (ISO 22007-1:2024)

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2024); German version EN ISO 22007-1:2024

塑料 热导率和热扩散率的测定 第1部分：一般原则（ISO 22007-1:2024）

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2024); German version EN ISO 22007-1:2024

地板防火试验.第1部分:使用放射热源的燃烧行为的测定(ISO 9239-1-2010);德文版本EN ISO 9239-1-2010

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010); German version EN ISO 9239-1:2010

地板防火测试反应 第1部分：使用辐射热源测定燃烧行为

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010); German version EN ISO 9239-1:2010

建筑材料和制品.导热率和热阻的测定法

Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance

房屋及建筑.使用辅助暖流计测定封闭结构热阻和热系数的方法

Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures wiht assistance of heat flow meter

保温. 物理量和定义

Thermal insulation. Physical quantities and definitions

塑料 酚醛粉末模塑化合物(PF-PMCs) 第2部分:试样的制备和性能的测定

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties

塑料 蜜胺/酚醛粉末模塑化合物(MP-PMCs) 第2部分:试样的制备和性能的测定

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties

塑料 不饱和聚酯粉末模塑化合物(UP-PMCs) 第2部分:试样的制备和性能的测定

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties

塑料 环氧树脂模塑化合物(EP-PMCs) 第2部分:试样的准备和特性的测定

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties

消防安全工程.控制代数公式的要求.第9部分:从开口喷射火焰

Fire safety engineering — Requirements governing algebraic formulae — Part 9: Ejected flame from an opening

高温掺合阀

High-temperature mixture valve

热分析方法通则 第3部分：差示扫描量热法

General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry

标准化热固性铸造复合材料 片状铸造复合材料（LLK）和体铸造复合材料（TLK）的规格 第3部分 特殊要求

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements

塑料 自热导热系数和热导率测定 第1部分：通用原理 (ISO 22007-1:2024)

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2024)

塑料 热导率和热扩散率的测定 第1部分：一般原则

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles

增强热固性模塑料 片状模塑料（SMC）和团状模塑料（BMC）的规格 第3部分：具体要求

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements

水泥试验方法 第11部分：水化热 方法 等温传导热量计法

Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method

建筑构造中的热桥 热量传递和表面温度 详细计算（ISO 10211:2017）

Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)

塑料 酚醛粉末模塑料（PF-PMCs） 第2部分：试样制备和性能测定（ISO 14526-2:1999）

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)

塑料 脲醛和脲/三聚氰胺甲醛粉末模塑料（UF-和UF/MF-PMC） 第2部分：试样制备和性能测定（ISO 14527-2:1999）

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)

塑料 三聚氰胺甲醛粉末模塑料（MF-PMCs） 第2部分：试样制备和性能测定（ISO 14528-2:1999）

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)

塑料 三聚氰胺/酚醛粉末模塑料（MP-PMCs） 第2部分：试样制备和性能测定（ISO 14529-2:1999）

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)

塑料 不饱和聚酯粉末模塑料（UP-PMC） 第2部分：试样制备和性能测定（ISO 14530-2:1999）

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)

塑料 环氧粉末模塑料（EP-PMCs） 第2部分：试样制备和性能测定（ISO 15252-2:1999）

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)

增强型热固性模塑料 片状模塑料（SMC）和块状模塑料（BMC）规范 第3部分：具体要求

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements

水泥测试方法 第11部分：水化热 等温传导量热法

Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method

塑料 酚醛粉末模塑料(PF-PMC)第2部分：测试样品的制备和性能测定

PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14526-2:1999)

塑料 尿素甲醛和尿素/三聚氰胺甲醛粉末成型化合物（UF-和 UF/MF-PMC） 第2部分：测试样品的制备和性能测定

PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14527-2:1999)

塑料 三聚氰胺-甲醛粉末模塑料(MF-PMC)第2部分：测试样品的制备和性能测定

PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14528-2:1999)

塑料 不饱和聚酯粉末模塑料(UP-PMC)第2部分：测试样品的制备和性能测定

Plastics. Unsaturated-polyester powder moulding compouns (UP-PMCs). Part 2: Preparation of test specimens and determination of properties. (ISO 14530-2:1999)

塑料 环氧粉末模塑化合物（EP-PMC） 第2部分：试样的制备和性能的测定 （ISO 15252-2:1999）

PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 15252-2:1999).

塑料 热导率和热扩散率的测定 第1部分：一般原则 (ISO 22007-1:2024)

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2024)

塑料 热导率和热扩散率的测定 第1部分：一般原则

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles