材料在高温下的机械物理特性集合。包含软化点、表观密度、流动性等指标,适用于环氧化粉末材料的性能评估体系。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ACI-TMS CODE 122.2-24 规范 |
用于确定低层住宅建筑能源规范合规性的混凝土和砖石的热性能——规范要求和评论 Thermal Properties of Concrete and Masonry for Use in Determining Energy Code Compliance for LowRise Residential Buildings— Code Requirements and Commentary
砌体 |
2024-4-1 美国混凝土学会 |
| ACI-TMS CODE 122.3-24 规范 |
Thermal Properties of Concrete and Masonry for Use in Determining Energy Code Compliance Except for Low-Rise Residential Buildings—Code Requirements and Commentary
建筑围护结构 砌体 |
2024-09-01 美国混凝土学会 |
| AENOR UNE-EN IEC 61189-2-801:2023 |
电气材料、印制电路板及其他互连结构和组件的测试方法 第2-801部分:基材热导率测试(2023年10月由西班牙标准化协会批准) Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials (Endorsed by Asociación Espa?ola de Normalización in October 2023.)
介电层 碳墨 |
2023-10-01 西班牙标准化协会 |
| ANSI/ASHRAE 138-2021 试验标准 |
Method of Testing for Rating Ceiling Panels for Sensible Heating and Cooling
测试室 |
2021-03-31 美国国家标准学会 |
| AS/NZS 2161.4:1999(R2016) 试验标准 |
Occupational Protective Gloves Part 4: Protection Against Thermal Risks (Heat and Fire)
防护手套 |
2016 澳大利亚/新西兰标准 |
| AS/NZS 2535.1:1999 试验 |
太阳能集热器的测试方法 第1部分:釉面液体加热集热器的热性能 包括压降 Test methods for solar collectors, Part 1: Thermal performance of glazed liquid heating collectors including pressure drop
|
1999-07-05 澳大利亚/新西兰标准 |
| AS/NZS 2535.1:2007 试验 |
太阳能集热器的测试方法第1部分:玻璃液体加热集热器的热性能,包括压降(包含第 1 号修正案:2014年8月) Test methods for solar collectors Part 1: Thermal performance of glazed liquid heating collectors including pressure drop (Incorporates Amendment No. 1: August 2014)
集热器 |
2007-03-07 澳大利亚/新西兰标准 |
| AS/NZS 2535.1:2007(R2014) 试验 |
太阳能集热器的测试方法 第1部分:玻璃液体加热集热器的热性能 包括压降 Test methods for solar collectors Part 1: Thermal performance of glazed liquid heating collectors including pressure drop
压降 集热器 |
2014 澳大利亚/新西兰标准 |
| ASAE S580.1-2013 试验标准 |
Testing and Reporting Solar Cooker Performance
|
2013-11-01 美国农业与生物工程师学会 |
| ASHRAE 138-2021 试验标准 |
Method of Testing for Rated Ceiling Panels for Sensible Heating and Cooling
测试室 |
2021-1-1 美国采暖、制冷与空调工程师协会 |
| ASME POM 102-2014 指南标准 |
Operating Walkdowns of Power Plants
发电厂 |
2014 美国机械工程师协会 |
| ASME POM 102-2014(R2019) 指南标准 |
Operating Walkdowns of Power Plants
发电厂 |
2014 美国机械工程师协会 |
| ASTM C1058/C1058M-10(2015) 实践标准 |
Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
标准测试方法 隔热材料 |
2015-03-01 美国材料与试验协会 |
| ASTM C1224-15 Specification |
Standard Specification for Reflective Insulation for Building Applications
发射率 |
2015 美国材料与试验协会 |
| ASTM C1363-11 Test Method |
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
建筑组件 |
2011 美国材料与试验协会 |
| ASTM C1512-10(2015)e1 Test Method |
Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
热绝缘产品 |
2010 美国材料与试验协会 |
| ASTM C665-24 试验 |
Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
矿物纤维 |
2024-11-01 美国材料与试验协会 |
| ASTM E905-87(2021) 试验标准 |
Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
|
2021 美国材料与试验协会 |
| ASTM F2733-21 规范 |
Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards
阻燃性 |
2021 美国材料与试验协会 |
| ASTM RR-D20-1203 1998 试验 |
D2843- Test Method for Density of Smoke from the Burning or Decomposition of Plastics
烟密度 |
1998 美国材料与试验协会 |
| ASTM STP 1635-2022 试验 |
Building Science and the Physics of Building Enclosure Performance: 2nd Volume
建筑围护结构 |
2022 美国材料与试验协会 |
| ASTM STP 1640-2022 试验 |
Advancing Masonry Technology
|
2022 美国材料与试验协会 |
| BH GSO IEC 61189-2-801:2024 |
电气材料、印制板和其他互连结构及组件的试验方法 第2-801部分:基材热导率试验 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2024 海湾阿拉伯国家合作委员会标准组织 |
| BS EN 10216-2:2024 规范 |
压力用途的无缝钢管 交货技术条件 具有规定高温性能的非合金钢管和合金钢管 Seamless steel tubes for pressure purposes. Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties
无缝钢管 测试类别 |
2024-11-30 英国标准学会 |
| BS EN ISO 7345:2018 术语 |
Thermal performance of buildings and building components. Physical quantities and definitions
物理量 能耗 |
2018-04-13 英国标准学会 |
| BS IEC 61189-2-801:2023 试验标准 |
电气材料、印制板和其他互连结构和组件的测试方法 第2-801部分:基材的导热率测试 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2 - 801 : Thermal conductivity test for base materials
介电层 碳墨 |
2023 英国标准学会 |
| DANSK DS/EN 17887-1:2024 |
建筑物热性能 已完工建筑物现场测试 第1部分:总热损失测试数据收集 Thermal performance of buildings – In situ testing of completed buildings – Part 1: Data collection for aggregate heat loss test
原位测试 建筑物 |
2024-05-27 丹麦标准化协会 |
| DANSK DS/EN IEC 61189-2-801:2023 |
电气材料、印刷电路板和其他互连结构和组件的试验方法 第2-801部分:基材热导率试验 Test methods for electrical materials, printed boards and other interconnection structures and assemblies – Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2023-09-13 丹麦标准化协会 |
| DIN EN 10216-2:2025-02 |
压力用途无缝钢管 交货技术条件 第2部分:具有规定高温性能的非合金钢管和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
无缝钢管 测试类别 |
2025-02-01 德国标准化学会 |
| DIN EN 12975-2:2002 试验 |
热太阳能系统及其部件 集热器 第2部分:试验方法(包括修正案AC: 2002) Thermal solar energy systems and their components - Collectors - Part 2: Test methods (including amendment AC: 2002)
耐久性测试 |
2002 德国标准化学会 |
| DIN EN 12975:2018 规范标准 |
Solar collectors - General requirements; German and English version prEN 12975:2018
太阳能集热器 安全性能 |
2018-09-01 德国标准化学会 |
| DIN EN 12976-2:2019 试验标准 |
Thermal solar systems and components - Factory made systems - Part 2: Test methods
|
2019-11-01 德国标准化学会 |
| DIN EN 12977-3:2012 试验 |
太阳热能美利体育官网首页网址和部件.定制美利体育官网首页网址.第3部分:太阳蓄水加热器的性能试验方法 Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores; German version EN 12977-3:2012
热水储罐 |
2012-06-01 德国标准化学会 |
| DIN EN 13216-1 E:2016-12 试验标准 |
Chimneys - Test methods for system chimneys - Part 1: General test methods
测试试件 系统排烟装置 |
2016-12 德国标准化学会 |
| DIN EN 13537:2002 规范 |
Requirements for sleeping bags
填充物 睡袋 |
2002 德国标准化学会 |
| DIN EN 1397:2015 试验 |
热交换器.液压间风扇线圈装置.性能确定的试验方法;德文版本EN 1397-2015 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:2015
|
2015-11 德国标准化学会 |
| DIN EN 14037-1:2016-12 试验 |
温度低于 120°C 的水的自由悬挂加热和冷却表面 第1部分:用于空间采暖的预制天花板安装辐射板 技术规范和要求 Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements; German version EN 14037-1:2016
生产控制 |
2016-12 德国标准化学会 |
| DIN EN 1745 E:2019-07 试验标准 |
Masonry and masonry products - Methods for determining thermal properties
砌体 |
2019-07 德国标准化学会 |
| DIN EN 17887-1:2024-11 |
建筑物热性能 已完工建筑物现场测试 第1部分:总热损失测试数据收集 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test; German version EN 17887-1:2024
原位测试 建筑物 |
2024-11-01 德国标准化学会 |
| DIN EN 1999-1-2:2010-12 规范 |
Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design; German version EN 1999-1-2:2007 + AC:2009 / Note: To be replaced by DIN EN 1999-1-2 (2021-04).
火灾设计 铝结构 |
2010-12 德国标准化学会 |
| DIN EN 305:1997 术语 |
Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers; German version EN 305:1997
流体 |
1997-07 德国标准化学会 |
| DIN EN 60034-1:2011-02*VDE 0530-1:2011-02 规范 |
Rotating electrical machines
额定值 |
2011-02-01 德国标准化学会 |
| DIN EN 62194:2006 试验 |
Method of evaluating the thermal performance of enclosures (IEC 62194:2005); German version EN 62194:2005
|
2006-05 德国标准化学会 |
| DIN EN 62194:2006-05 试验 |
Method of evaluating the thermal performance of enclosures (IEC 62194:2005); German version EN 62194:2005
|
2006-05 德国标准化学会 |
| DIN EN IEC 61189-2-801 E:2019-04 试验标准 |
电气材料、印制板和其他互连结构和组件的测试方法 第2-801部分:基材的导热率测试(草案) Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
碳墨 |
2019-04 德国标准化学会 |
| DIN EN IEC 61189-2-801:2024 |
电气材料、印刷板和其他互连结构和组件的试验方法 第2-801部分:基材热导率试验 (IEC 61189-2-801:2023) Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials (IEC 61189-2-801:2023); German version EN IEC 61189-2-801:2023
介电层 碳墨 |
2024-08-01 德国标准化学会 |
| DIN EN IEC 61189-2-801:2024-08 |
电气材料、印制板和其他互连结构和组件的试验方法 第2-801部分:基材热导率试验(IEC 61189-2-801:2023) Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials (IEC 61189-2-801:2023); German version EN IEC 61189-2-801:2023
介电层 碳墨 |
2024-08-01 德国标准化学会 |
| DIN EN ISO 11403-2 E:2021-10 试验标准 |
塑料可比多点特性的测定和表示 第2部分:热性能和加工性能(草案) Determination and expression of comparable multipoint properties of plastics Part 2: Thermal and processing properties (draft)
|
2021-10 德国标准化学会 |
| DIN EN ISO 22097:2020-02 试验标准 |
Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance (ISO/DIS 22097:2019); German and English version prEN ISO 22097:2019 / Note: Date of issue 2020-01-10*Intended as replacement for DIN EN 16012 (201...
发射率 |
2020-02 德国标准化学会 |
| DIN EN ISO 7345 E:2017-05 术语标准 |
Physical quantities and definitions of thermal properties of buildings and building components (draft)
物理量 |
2017-05 德国标准化学会 |
| DIN EN ISO 7345:2018-07 术语 |
Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018); German version EN ISO 7345:2018
定义 物理量 |
2018-07 德国标准化学会 |
| DIN V 44570-60531:2008 试验 |
Household electric thermal storage room heaters - Methods for measuring performance (IEC 59C/107/DC:2002)
热回收 |
2008-04 德国标准化学会 |
| DIN V ENV 12977-3:2001-10 试验 |
定制生产的太阳能装置 第3部分:太阳能加热系统的热存储美利体育官网首页网址特性 EN 12977-3 Thermal solar systems and components — Custom built systems — Part 3: Performance characterisation of stores for solar heating systems
测试台 |
2001-04 德国标准化学会 |
| GB/T 16155-2018 规范/规程 |
Test method for performance of civil water heating coal stove
|
2018-02-06 国家市场监督管理总局 |
| GB/T 23360-2009 试验 |
Method of evaluating the thermal performance of enclosures
机壳 |
2009-03-19 国家市场监督管理总局 |
| GB/T 28859-2012 规范 |
Encapsulating material of powdered epoxy for electronic components
|
2012-11-05 国家市场监督管理总局 |
| GB/T 30594-2014 试验/规范 |
Thermal performance of double-skin glass facade.Tracer gas mehtod
|
2014-06-09 国家市场监督管理总局 |
| GB/T 6109.1-2008 规范 |
Enamelled round winding wires - Part 1: General provisions
导体直径 漆包线 |
2008-12-01 国家市场监督管理总局 |
| GOST 30645-1999 规范 |
节能 非传统和可再生能源 用于市政供暖的空气 水热泵 通用技术要求及试验方法 Energy saving. Non-traditional and renewable energy sources. Air-to-water heat pumps for municipal heating. General technical requirements and test methods
|
1999-1-1 俄罗斯标准局 |
| GOST IEC 60851-6-2011 试验 |
Winding wires. Test methods. Part 6. Thermal properties
恒温器 绕组导线 |
2011 俄罗斯标准局 |
| GSO IEC 61189-2-801:2024 |
电气材料和印制电路板及其他连接装配结构的试验方法 第2部分-801:基本材料的热传导性试验 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2024 海湾阿拉伯国家合作委员会标准组织 |
| IEC 61189-2-801:2023 |
电气材料、印制板和其他互连结构和组件的试验方法.第2-801部分:基材的热导率试验 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2023-07-26 国际电工委员会 |
| IEC 62282-3-201:2017+AMD1:2022 CSV 试验标准 |
燃料电池技术第3-201部分:固定式燃料电池动力系统小型燃料电池动力系统性能试验方法 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
燃料电池发电系统 电性能 |
2022-02-03 国际电工委员会 |
| IRAM 210002-1:2016 试验 |
太阳能 太阳能集热器 第1部分 测定液体加热用带盖太阳能集热器热性能试验方法 Solar energy. Solar collectors. Part 1 - Test methods to determine the thermal efficiency of solar collectors with cover for heating liquids.
压降 太阳能集热器 |
2016-01-20 阿根廷标准化研究所 |
| IRAM-NM 60851-6:2008 试验 |
电磁线圈用导线 试验方法 第6部分:热特性 (IEC 60851-6:1996 MOD) Winding wires. Test methods. Part 6 - Thermal properties. (IEC 60851-6:1996, MOD)
|
2008-12-30 阿根廷标准化研究所 |
| ISO 11403-2:2012 试验标准 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
|
2012-09 国际标准化组织 |
| ISO 22097:2023 试验标准 |
Thermal insulation for buildings — Reflective insulation products — Determination of thermal performance
|
2023-06 国际标准化组织 |
| ISO 23537-1:2016 试验 |
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements
睡袋 |
2016-10 国际标准化组织 |
| ISO 834-13:2019 试验 |
耐火试验.建筑构件.第13部分:带腹板开口的钢梁的防火试验和评定要求 Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
结构模型 |
2019-05-21 国际标准化组织 |
| JIS A 4710:2015 规范标准 |
Windows and doorsets -- Thermal resistance test
热绝缘 |
2015-03-20 日本工业标准调查会 |
| JIS C 3216-6:2011 试验标准 |
Winding wires -- Test methods -- Part 6: Thermal properties
绕组线 |
2011-03-22 日本工业标准调查会 |
| JSA JIS C 3216-6-2019 试验 |
JIS C 3216-6:2019 绕组电线-试验方法 第6部分:热性能 JIS C 3216-6:2019 Winding wires-Test methods Part 6: Thermal properties
绕线 |
2019-02-20 日本工业标准调查会 |
| LST EN 10216-2:2024 |
铁管 高压管 技术供应条件 第二部分 指定高温性能的不合金和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
无缝钢管 测试类别 |
2024-12-31 立陶宛标准局 |
| LST EN 17887-1:2024 |
建筑物热工特性 完工建筑的现场测试 第1部分:用于整体热损失测试的数据收集 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
原位测试 建筑物 |
2024-08-14 立陶宛标准局 |
| LST EN 60851-6:2012 试验 |
绕线导线 试验方法 第6部分:热性能(IEC 60851-6:2012) Winding wires - Test methods -- Part 6: Thermal properties (IEC 60851-6:2012)
漆包线 |
2012-12-21 立陶宛标准局 |
| LST EN IEC 61189-2-801:2023 |
电工材料、印刷电路板和其它互连件及组件的试验方法 第2-801部分:基材导热性试验 (IEC 61189-2-801:2023) Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials (IEC 61189-2-801:2023)
介电层 碳墨 |
2023-11-15 立陶宛标准局 |
| NB/T 34036-2020 试验 |
Test methods for small biomass boilers
生物质成型燃料 |
2020-10-23 行业标准-能源 |
| NF C93-732-801*NF EN IEC 61189-2-801:2023 |
电气材料、印刷电路板和其他互连结构和组件的试验方法 第2-801部分:基材热导率试验 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2023-09-08 法国标准化协会 |
| NF EN 10216-2:2024 |
压力用途的无缝钢管 交货技术条件 第2部分:具有规定高温性能的非合金钢管和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties
无缝钢管 测试类别 |
2024-11-01 法国标准化协会 |
| NF EN IEC 61189-2-801:2023 |
电气材料、印制板和其他互连结构和组件的测试方法 第 2-801 部分:基材的导热率测试 Test methods for electrical materials, printed boards and other interconnecting structures and assemblies - Part 2-801: thermal conductivity testing for base materials
介电层 碳墨 |
2023-09-08 法国标准化协会 |
| NY/T 2370-2013 试验方法 |
Test performance method of domestic biofuel cooking stove
|
2013-05-20 行业标准-农业 |
| PD CEN ISO/TR 52019-2:2017 指南标准 |
Energy performance of buildings. Hygrothermal performance of building components and building elements. Explanation and justification
建筑构件 热桥 |
2017-11-24 英国标准学会 |
| PD CEN ISO/TR 52022-2:2017 指南标准 |
建筑物的能源性能 建筑构件和元件的热、太阳能和日光特性 解释和理由 Energy performance of buildings. Thermal, solar and daylight properties of building components and elements. Explanation and justification
建筑组件 能源性能 |
2018-01-16 英国标准学会 |
| SAE ARP8058A-2021 试验标准 |
Thermal Design and Performance of Airplane In-Flight Food Storage Carts
|
2021-11-09 美国机动车工程师协会 |
| SS-EN 12975-2:2002 试验 |
Thermal solar systems and components - Solar collectors - Part 2: Test methods
可靠性测试 集热器 |
2002 瑞典标准研究所 |
| SS-EN 1745:2020 试验 |
Masonry and masonry products - Methods for determining thermal properties
砌体 砌体单元 |
2020 瑞典标准研究所 |
| SS-EN 17887-1:2024 试验标准 |
建筑物的热性能 已完工建筑现场测试 第一部分:汇总热损失测试的数据收集 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
原位测试 建筑物 |
2024 瑞典标准研究所 |
| SS-EN 17888-1:2024 试验标准 |
建筑物的热性能 整体热损失测试用建筑试验结构现场测试 第一部分: 综合热损失测试的数据采集 Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test
建筑结构 |
2024-05-28 瑞典标准研究所 |
| SS-EN IEC 61189-2-801:2024 |
电气材料、印制板和其他互连结构和组件的试验方法 第2部分-801:底材热导率试验 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials
介电层 碳墨 |
2024 瑞典标准研究所 |
| SS-EN ISO 13786:2017 试验标准 |
建筑构件的热性能 动态热特性 计算方法(ISO 13786:2017) Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017)
建筑构件 |
2017 瑞典标准研究所 |
| SS-EN ISO 13789:2007 试验标准 |
建筑物的热性能 传热和通风换热量系数 计算方法(ISO 13789:2007) Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2007)
|
2007 瑞典标准研究所 |
| SS-EN ISO 22097:2023 试验标准 |
建筑物隔热 反射隔热产品 热性能的测定(ISO 22097:2023) Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance (ISO 22097:2023)
|
2023 瑞典标准研究所 |
| SS-EN ISO 7345:2018 术语标准 |
建筑和建筑构件的热性能 物理量和定义 (ISO 7345:2018) Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018)
建筑元素 物理量 |
2018-04-10 瑞典标准研究所 |
| SS-EN ISO 9806:2017 试验标准 |
Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
太阳能集热器 耐久性测试 |
2017 瑞典标准研究所 |
| UNE-EN 12977-4:2019 试验标准 |
太阳能热系统和组件 定制系统 第4部分:太阳能组合存储装置的性能测试方法 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
|
2019-06-26 西班牙标准化协会 |
| UNE-EN 1745:2020 试验标准 |
Masonry and masonry products - Methods for determining thermal properties
砌体 |
2020-11-04 西班牙标准化协会 |
| UNE-EN 17887-1:2025 |
建筑物热性能 已建成建筑物的现场测试 第1部分:整体热损失测试的数据收集 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
原位测试 建筑物 |
2025-01-15 西班牙标准化协会 |
| UNE-EN 62282-3-201:2013 试验标准 |
燃料电池技术 第 3-201 部分:固定式燃料电池动力系统 小型燃料电池动力系统的性能测试方法 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
燃料电池发电系统 电性能 |
2013-12-23 西班牙标准化协会 |
| UNE-EN IEC 61189-2-801:2023 |
电气材料、印刷板和其他互连结构和组件的测试方法 第 2-801 部分:基础材料的导热率测试(由西班牙标准化协会于 2023 年 10 月批准 ) Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials (Endorsed by Asociación Espa?ola de Normalización in October of 2023.)
介电层 碳墨 |
2023-10-01 西班牙标准化协会 |
| UNI EN 10216-2:2024 |
压力用途的无缝钢管 交货技术条件 第2部分:具有规定高温性能的非合金钢管和合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
无缝钢管 测试类别 |
2024-12-12 意大利统一标准化组织 |
| UNI EN 17887-1:2024 |
建筑物热性能 已完工建筑物现场测试 第1部分:总热损失测试数据收集 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
原位测试 建筑物 |
2024-06-27 意大利统一标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-05-31 01:41