美利体育登录入口官网

可靠性测试 恒定失效率和恒定失效强度的符合性测试（2023年5月获西班牙标准化协会认可）

Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by Asociación Espa?ola de Normalización in May 2023.)

核工业科学和工程计算机程序的验证和确认指南

Guidelines for the verification and validation of scientific and engineering computer programs for the nuclear industry

温度测量的标准方法

Standard Methods for Temperature Measurement

气体流量测量的标准方法

Standard Methods for Gas Flow Measurement

气体流量测量标准方法

Standard Methods for Gas Flow Measurement

液体流量测量的标准方法

Standard Methods for Liquid Flow Measurement

洁净室及相关受控环境．证明持续符合 ISO 14644.1（ISO 14644．2：2000，MOD）要求的试验和监测规范

Cleanrooms and associated controlled enviornments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD)

焊接材料——填充材料和焊剂的采购

Welding consumables — Procurement of filler materials and fluxes

焊接材料 填充材料和焊剂的采购

Welding consumables - Procurement of filler materials and fluxes

确定操作 HVAC 空气分配系统泄漏的测试方法

Method of Test to Determine Leakage of Operating HVAC Air Distribution Systems

2021 ASME 锅炉和压力容器规范 第II部分：材料 C 部分焊条、电极和填充金属的规范

2021 ASME Boiler and Pressure Vessel Code SECTION II: MATERIALS Part C Specifications for Welding Rods, Electrodes, and Filler Metals

运输集装箱和系统用性能试验的标准实施规程

Standard Practice for Performance Testing of Shipping Containers and Systems

船运集装箱和系统性能试验的标准实施规程

Standard Practice for Performance Testing of Shipping Containers and Systems

用于单包裹投递系统的包装的性能试验的标准实施规程

Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

焊接和钎焊消耗品 填料金属和焊剂的采购

Welding and brazing consumables, filler metal and flux procurement

电子元件质量评估协调制度分规范：机电全有或全无继电器（包括用于恶劣环境条件的继电器）

Harmonized system of quality assessment for electronic components Sectional specification : Electromechanical all - or - nothing relays (including relays for severe environmental conditions)

废弃物的特性描述. 测试程序的编写和应用框架. 目标, 计划和报告

Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing. Compliance tests for constant failure rate and constant failure intensity

电动汽车传导充电系统 电动汽车对交流/直流电源传导连接的要求 非车载电动汽车充电系统的 EMC 要求

Electric vehicle conductive charging system - Electric vehicle requirements for conductive connection to an AC/DC supply. EMC requirements for off board electric vehicle charging systems

焊接材料.填充材料和焊料的采购

Welding consumables - Procurement of filler materials and fluxes

焊接耗材 填充材料和焊剂的采购

Welding consumables. Procurement of filler materials and fluxes

公路车辆 车载以太网 光纤 1-Gbit/s 物理层系统要求和测试计划

Road vehicles. In-vehicle Ethernet - Optical 1-Gbit/s physical layer system requirements and test plans

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing – Compliance tests for constant failure rate and constant failure intensity

焊接耗材 填充材料和焊剂的采购

Welding consumables – Procurement of filler materials and fluxes

报警系统 入侵和拦截系统

Alarm systems – Intrusion and hold-up systems

包装 完整、填充的运输包装和单位负载 常见分销链的性能测试计划

Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains; German version EN 15552:2008

完整填充运输包装 一般规则用于编制性能试验计划 第1部分：基本原理（ISO 4180-1 : 1980）

Completely filled transport packaging - General rules for the preparation of performance test plans - Part 1: Basic principles (ISO 4180-1: 1980)

运输完整包装—性能测试计划编制通用规则 第2部分：加载参数

Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 2: Quantitative data

电子美利体育官网首页网址用连接器.产品要求.第3-001部分:矩形接插件.空白详细规范(IEC 61076-3-001-2008).德文版本EN 61076-3-001-2008

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008); German version EN 61076-3-001:2008

电子美利体育官网首页网址连接器 产品要求 第3-001部分：矩形连接器 空白详细规范

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008); German version EN 61076-3-001:2008 / Note: DIN EN 61076-3-001 (2000-10) remains valid alongside this st...

电子美利体育官网首页网址连接器 产品要求 第3部分：矩形连接器 截面规范

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008); German version EN 61076-3:2008 / Note: DIN EN 61076-3 (2000-10) remains valid alongside this standard until 2011-1...

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012); German version EN 61124:2012 / Note: DIN EN 61124 (2007-01) remains valid alongside this standard until 2015-06-27.

焊接耗材 填充材料和焊剂的采购（ISO/DIS 14344:2024）

Welding consumables - Procurement of filler materials and fluxes (ISO/DIS 14344:2024); German and English version prEN ISO 14344:2024

焊接耗材 填充材料和焊剂的采购（ISO/DIS 14344:2024）

Welding consumables - Procurement of filler materials and fluxes (ISO/DIS 14344:2024); German and English version prEN ISO 14344:2024 / Note: Date of issue 2024-01-26*Intended as replacement for DIN EN ISO 14344 (2010-06).

包装 完整、填充的运输包装 性能测试计划编制的一般规则

Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2019); German version EN ISO 4180:2019

测试和规范方法（MTS） 互联网协议测试（IPT） IPv6 测试预规范研究

Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); Pre-normative Study for IPv6 Testing

数字蜂窝电信系统（ 第2阶段以上） 通用移动电信系统(UMTS) LTE 与（通用）用户接口模块 ((U)SIM) 应用程序编程接口 (API) (3GPP T...) 绑定的 C 语言测试规范

Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Test Specification for C-language binding to (Universal) Subscriber Interface Module ((U)SIM) Application Programming Interface (API) (3GPP T...

质子交换膜燃料电池 第6部分：双极板特性测试方法

Proton Exchange Membrane Fuel Cell Part 6: Bipolar Plate Characteristics Test Method

电子模块系统的总线串行接口.用作远程终端的接口模块的测试计划.测试方法的一般要求

Bus serial interface of electronic modules system. Test-plan for interface modules, functioning as remote terminal. General requirements for test methods

电子美利体育官网首页网址连接器.试验和测量.第99-001部分:电力负荷下的接通和断开连接器试验进度表.试验99a:用于带远程动力的双绞线通信电缆中的连接器

Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

电气和电子美利体育官网首页网址用连接器.试验和测量.第99-002部分:耐久性试验计划.试验99b:电气负载下不匹配的试验计划

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

电子美利体育官网首页网址用连接器.产品要求.第2部分:圆形连接器用分规范

Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

电子美利体育官网首页网址连接器.第3部分:矩形连接器.分规范

Connectors for electronic equipment - Part 3: Rectangular connectors - Sectional specification

可靠性试验.恒定故障率和恒定故障强度的符合性试验

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

IEEE 信息技术推荐实践 2000 年测试方法

IEEE Recommended Practice for Information Technology - Year 2000 Test Methods

焊接消耗品.填充物材料和助熔剂的采购

Welding consumables - Procurement of filler materials and fluxes

空间系统.一般测试文档

Space systems - General test documentation

软件和系统工程.软件测试.第13部分:在生物测定系统测试中使用ISO/IEC/IEEE 29119系列

Software and systems engineering - Software testing - Part 13: Using the ISO/IEC/IEEE 29119 series in the testing of biometric systems

电子美利体育官网首页网址连接器.第3-001部分:经质量评定的矩形连接器.空白详细规范

Connectors for electronic equipment -- Part 3-001: Rectangular connectors with assessed quality -- Blank detail specification

废物表征 废物材料采样 采样计划的编制与应用框架

Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan

废物表征：测试方案的编制与应用框架 目标、规划与报告

Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report

连接件 电子美利体育官网首页网址 产品要求 第3部分：矩形连接器 规格书 (IEC 61076-3:2008)

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008)

可靠性试验 恒定失效率和恒定故障强度的符合性试验（IEC 61124:2023）

Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2023)

焊接材料 填充材料和助焊剂的选择（ISO 14344:2024）

Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2024)

焊接耗材 填充材料和焊剂的采购

Welding consumables - Procurement of filler materials and fluxes

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

可靠性测试 - 恒定故障率和恒定故障强度的合规性测试计划

Reliability Testing - Compliance Test Plans for Constant Failure Rate and Constant Failure Intensity

焊接耗材 填充材料和焊剂的采购

Welding consumables - Procurement of filler materials and fluxes

废弃物特性.废弃物材料取样.第5部分:关于确定取样计划程序的导则

Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan

飞行中推力测定

In-Flight Thrust Determination

数字时分命令/响应多路复用数据总线测试计划手册

Handbook for the Digital Time Division Command/Response Multiplex Data Bus Test Plans

应用于成本效益测试的测量不确定度

Measurement Uncertainty Applied to Cost-Effective Testing

数字时分命令/响应复用数据总线远程终端验证测试计划

Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals

军事和航空航天车辆应用的 AS5643 IEEE-1394b 接口要求的测试计划/程序

Test Plan/Procedure for AS5643 IEEE-1394b Interface Requirements for Military and Aerospace Vehicle Applications

远距离 AS5643/1 S400 铜介质接口特性的测试计划/程序

Test Plan/Procedure for AS5643/1 S400 Copper Media Interface Characteristics Over Extended Distances

包装 完成 装满运输包装和单元载荷 常见分布链的性能测试计划

Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

焊接消耗品 填充材料和焊剂的采购（ISO 14344:2024 等同采用）

Welding consumables — Procurement of filler materials and fluxes (ISO 14344:2024, IDT)

道路车辆 控制器局域网络（CAN） 一致性测试计划

Road vehicles - Controller area network (CAN) - Conformance test plan

电子美利体育官网首页网址用固定电阻器 第8-1部分：空白详细规范：通用电子美利体育官网首页网址用固定表面贴装(SMD)低功率薄膜电阻器 分类级别 G

Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G (Endorsed by AENOR in July of 2015.)

电子美利体育官网首页网址连接器 产品要求 第3-001部分：矩形连接器 空白详细规范

Connectors for electronic equipment - Product requirements -- Part 3-001: Rectangular connectors - Blank detail specification (Endorsed by AENOR in February of 2009.)

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

可靠性测试 恒定故障率和恒定故障强度的合规性测试

Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by Asociación Espa?ola de Normalización in May of 2023.)

焊接耗材 填充材料和焊剂的采购（ISO 14344:2010）

Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010)

焊接耗材 焊丝和焊剂的采购（ISO 14344:2024）

Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2024)

焊接材料 焊材及焊剂的供应

Welding consumables - Procurement of filler materials and fluxes

真空镀膜质量保证 真空镀膜塑料的测试

Vacuum coating quality assurance - Testing of vacuum coated plastics

住宅及公寓用防撬门标

Burglar-resistant door plates for houses and apartments