美利体育登录入口官网

包装的干水硬水泥砂浆(非收缩的)标准规范

Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

耐化学性聚合物机械浆料的流动性和轴承面积的标准试验方法

Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

含水凝水泥自流平沙浆的标准试验方法

Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

含水硬性水泥自流平砂浆的标准试验方法

Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

塑料材料的表观密度,容积因素,和可倾注性的标准试验方法

Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格

Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

二冲程循环汽油发动机润滑剂与汽油混溶性和流动性的标准规范

Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

汽油和二冲程循环汽油发动机润滑剂流动性的混溶性标准规范

Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

沉积物中NAPL迁移和迁移的标准指南——样品采集、现场筛选和样品处理

Standard Guide for NAPL Mobility and Migration in Sediment—Sample Collection, Field Screening, and Sample Handling

用稠度计测定粘稠液体一致性的标准试验方法

Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

用稠度计测定粘稠液体一致性的标准试验方法

Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

B0527-金属粉末和化合物振实密度的测试方法

B0527-Test Method for Tap Density of Metal Powders and Compounds

沥青混合物 测试方法 马歇尔试验

Bituminous mixtures. Test methods. Marshall test

不定形耐火制品 第4部分：浇注料稠度的测定

Unshaped refractory products — Part 4 : Determination of consistency of castables

纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification

牙齿修复体.磷酸盐结合耐火模具材料

Dental restorations - Phosphate - bonded refractory die materials

纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性、熟化期和储存期限的测定

Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life

塑料.液态环氧树脂.结晶倾向的测定

Plastics. Liquid epoxy resins. Determination of tendency to crystallize

塑料.可浇注性的测定

Plastics - Determination of pourability

牙科磷酸盐 - 粘结铸造投资

Dental phosphate - bonded casting investments

新拌混凝土试验 第10部分：自充填混凝土 L箱试验（草案）

Testing fresh concrete - Part 10: Self-compacting concrete - L box test

纤维增强塑料.玻璃垫增强热塑性塑料.流动性和固化的测定

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005

纤维增强塑料 玻璃纤维增强热塑性塑料（GMT） 流动性和凝固性的测定

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005

预拉伸钢筋束用灌浆.试验方法

Grout for prestressing tendons - Test methods; English version of DIN EN 445:2008-01

纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性、熟化和使用寿命测定

Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997

精细陶瓷(高级陶瓷,高级工艺陶瓷) 陶瓷粉流动性测定（草案）

Fine ceramics (advanced ceramics, advanced craft ceramics) Ceramic powder flowability determination (draft)

精细陶瓷(高级陶瓷,高级工艺陶瓷).陶瓷粉流动性测定(ISO 14629-2012).德文版本EN ISO 14629-2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012); German version EN ISO 14629:2016

塑料 流动性的测定（ISO/DIS 6186:2023）

Plastics - Determination of pourability (ISO/DIS 6186:2023); German and English version prEN ISO 6186:2023

塑料 倾倒性测定

Plastics - Determination of pourability (ISO/DIS 6186:2023); German and English version prEN ISO 6186:2023 / Note: Date of issue 2023-01-20*Intended as replacement for DIN EN ISO 6186 (1998-08).

牙科.石膏制品(ISO 6873-2013).德文版本EN ISO 6873-2013

Dentistry - Gypsum products (ISO 6873:2013); German version EN ISO 6873:2013

建筑密封材料试验方法 第6部分;流动性的测定

Test method for building sealants Part 6: Determination of flow

塑料 流动性的测定

Plastics.Determination of pourability

农药水分散粒剂流动性测定方法

Testing method of flowability for water dispersible granules of pesticide

精细陶瓷粉末流动性测定 标准漏斗法

Determination of flowability of fine ceramic powders—Calibrated funnel

增材制造用镍粉

Nickel powders for additive manufacturing

增材制造用钨及钨合金粉

Tungsten and tungsten alloy powder for additive manufacturing

金属粉末.借助标准漏斗（霍尔仪）测定流动性

Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)

塑料.松散性测定法

Plastics. Determination of pourability

牙模蜡铸型.技术要求.试验方法

Dental casting wax. Technical requirements. Test methods

特殊用途的灭火粉 一般技术要求 测试方法

Special dry fire extinguishing powders. General technical requirements. Test methods

釉瓷.粘度特性的测定.扩展性测试

Vitreous enamels. Determination of viscosity characteristics. Testing for spreading

用于尿失禁的吸尿剂 表征聚合物基吸收材料的测试方法 第8部分流量的重量法测定

Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 8. Gravimetric determination of flowrate

粉末冶金制品和粉末的性能测试 金属粉末流动性的测试方法

Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders

颜料流动度测定法

Determination of mobility of pigments

煤 - 塑性特性的测定 - 恒转矩吉泽勒塑性计法

Coal — Determination of plastic properties — Constant-torque Gieseler plastometer method

精细陶瓷(高级陶瓷,高级工艺陶瓷).陶瓷粉流动性测定

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders

尿失禁用吸尿器 聚合基吸收材料特性化的试验方法 第8部分：比重法测定流速

Urine-absorping aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 8: Gravimetric determination of flowrate

增材制造金属 原料 PBF-LB 机器中旋转鼓测量与粉末铺展性的关联

Additive Manufacturing of Metals—Feedstock Materials—Correlating of Rotating Drum Measurement with Powder Spreadability in PBF–LB Machines

静电复印干式色调剂流动性测定方法

Measurement method of fluidity for toner in dry electrostatics copying

水雾化CuSn10青铜粉

Water atomization CuSn10 bronze powder

静电复印干式显影剂载体 第2部分:流动性试验方法

Carrier of electrostatic dry developer.Part 2: Test method for flowability

塑料.聚苯亚基醚(PPE)模塑和挤塑材料.第2部分:试样制备和性能测定

Plastics -- Poly (phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

精细陶瓷颗粒特性的试验方法.第4部分:可流动性

Test methods of properties of fine ceramic granules Part 4: Flowability

牙科用熟石膏

Dental plaster

纤维增强塑料 玻璃纤维毡增强热塑性塑料（GMT） 流动性和固化测定

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification

牙科 模型铸造用材料和耐热模型材料（ISO 15912:2016）

Dentistry - Refractory investment and die material (ISO 15912:2016)

圬工砂浆试验方法 第4部分：新凝砂浆稠度测定（浸透法）

Methods of test for mortar for masonry. Part 4 : determination of consistence of fresh mortar (by plunger penetration).

灌封胶 环氧双酚A型未填充 室温固化

Potting Compound@ Epoxy Bisphenol A-Type Unfilled@ Room Temperature Cure

二冲程汽油机油流动性及其与汽油混溶性测定法

Test method for miscibility with gasoline and fluidity of two-stroke-cycle gasoline engine lubricants

工业用石灰制品 石灰制品流动性的测定

Lime products for industrial purposes - Determination of fluidness in lime products

沥青混合料 试验方法 第34部分：马歇尔试验

Bituminous mixtures - Test methods - Part 34: Marshall test

纤维增强塑料 玻璃布增强热塑性塑料（GMT） 流动性和固化测定

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification

混凝土、砂浆和灌浆外加剂 第4部分:预应力筋灌浆外加剂 定义、要求、合格证、标记和标签

Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling

金属粉末 通过校准漏斗（古斯塔夫森流量计）测定流量（ISO 13517:2013）

Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)

金属粉末 使用校准漏斗（古斯塔夫松流速计）测定流动速率（ISO 13517:2020）

Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)

先进陶瓷（精细陶瓷、高级技术陶瓷） 陶瓷粉体的流动性测定（ISO 14629:2012）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012)

牙科 铸造蜡和底板蜡

Dentistry - Casting and baseplate waxes (ISO 15854:2005)

塑料 液体环氧树脂 结晶倾向的测定（ISO 4895:2014）

Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)

涂层粉末 第11部分：斜面流动试验（ISO 8130-11:2019）

Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)

粘结剂喷射铸型（芯）用硅砂

Silica sand for binder jetting sand mould（core）

纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定

Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification

塑料 流动性的测定 （ISO 6186:1998）

PLASTICS. DETERMINATION OF POURABILITY. (ISO 6186:1998).

不定形耐火材料试样制备方法.第1部分:耐火浇注料

Preparation of specimen for unshaped refractories Part1:Refractory castables

镍包铬复合粉

Nickel-coated chromium composite powders

铝包镍复合粉

Aluminum—coated nickel composite powder

铁青铜复合粉

Copper coated iron powder