美利体育登录入口官网

同轴电缆. 电缆配电网络用电缆分规范. 在5 MHz - 1000 MHz上运行的系统用室外电压降电缆

Coaxial cables. Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz - 1000 MHz

消音室.屏蔽消音测量

Anechoic chambers - Shield attenuation measurement

通信电缆.试验方法规范.电气试验方法.接插线/同轴电缆配件/预连接电缆的耦合衰减或屏蔽衰减

Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables

通信电缆.试验方法规范.连接硬件的耦合衰减或屏蔽衰减

Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware

通信电缆.试验方法规范.电气试验方法.电磁性能

Communication cables. Specifications for test methods. Electrical test methods. Electromagnetic performance

金属电缆和其他无源元件的试验方法 电磁兼容性（EMC） 测量传输阻抗和屏蔽衰减的试验方法 或与三轴单元的耦合衰减

Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Test method for measuring transfer impedance and screening attenuation. or coupling attenuation with triaxial cell

金属电缆和其他无源元件的试验方法 电磁兼容性（EMC） 将频率范围扩展到较高频率以用于传输阻抗，并将频率范围扩大到较低频率以用于使用三端双向可控硅进行屏蔽衰减测量

Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxia

金属通信电缆试验方法. 第4-5部分: 电磁兼容性(EMC). 耦合或屏蔽衰减. 吸收夹紧法

Metallic communication cable test methods. Part 4-5: Electromagnetic compatibility (EMC) – Screening or coupling attenuation – Absorbing clamp method

金属电缆和其他无源元件的测试方法 电磁兼容

Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling a...

金属通信电缆测试方法-电磁兼容性（EMC） 屏蔽平衡电缆的耦合衰减 三轴法

Metallic communication cable test methods - Electromagnetic compatibility (EMC). Coupling attenuation of screened balanced cables, triaxial method

屏蔽平衡电缆 耦合衰减测量 三轴方法

Three-axis method for measuring coupling attenuation of shielded balanced cables

防护服.第100部分:频率范围为80MHz至1GHz的电磁场防护.要求和试验方法

Protective clothing - Part 100: Protection against electromagnetic fields in the frequency range from 80 MHz to 1 GHz; Requirements and test methods

消声室.第1部分:屏蔽消声测量

Anechoic chambers - Part 1: Shield attenuation measurement; German version EN 50147-1:1996

通信电缆.试验方法规范.第1-13部分:电气试验方法.接插线/同轴电缆配件/预连接电缆的耦合衰减或屏蔽衰减

Communication cables - Specifications for test methods - Part 1-13: Electrical test methods - Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables; German version EN 50289-1-13:2004

通信电缆.试验方法规范.第1-14部分:连接硬件的耦合衰减或屏蔽衰减

Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware; German version EN 50289-1-14:2004

通信电缆.试验方法规范.第1-6部分:电气试验方法.电磁性能

Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance; German version EN 50289-1-6:2002

射频与同轴电缆组件.第1部分:总规范.一般要求和试验方法.

Radio frequency and coaxial cable assemblies - Part 1: Generic specification; general requirements and test methods (IEC 60966-1:1999); German version EN 60966-1:1999

射频与同轴电缆组件. 第2-4部分: 无线电和电视接收机用电缆部件详细规范. 频率范围0至3000MHz, IEC 61169-2 连接部件（IEC 60966-2-4: 2009）; 德文版本 EN 60966-2-4: 2009

Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61169-2 connectors (IEC 60966-2-4:2009); German version EN 60966-2-4:2009

射频和同轴电缆组件.第2-6部分:无线电和电视接收机用电缆组件详细规范.频率范围0MHz-3000MHz的IEC 61169-24连接件

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61169-24 connectors (IEC 60966-2-6:2009); German version EN 60966-2-6:2009

电子美利体育官网首页网址机械结构 IEC 60917 和 IEC 60297 测试

Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297

电缆组件、电缆、连接器和无源微波元件 混响室法测量屏蔽衰减（草案）

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

电缆组件、电缆、连接器和无源微波元件.混响室法测量屏蔽衰减

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999); German version EN 61726:2000

金属通信电缆试验方法.第4-2部分:电磁兼容性(EMC).屏蔽和耦合衰减.注入夹紧法

Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method (IEC 62153-4-2:2003); German version EN 62153-4-2:2004

金属通信电缆测试方法 第4-2部分：电磁兼容性(EMC)屏蔽和耦合衰减 注入钳法

Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method (IEC 62153-4-2:2003); German version EN 62153-4-2:2004

金属通信电缆试验方法.第4-7部分:电磁兼容性(EMC).测量传输阻抗和屏蔽或耦合衰减的试验方法.套管法(IEC 62153-4-7-2006)

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method (IEC 62153-4-7:2006); German version EN 6215

金属通信电缆试验方法 第4-5部分:电磁兼容 耦合或屏蔽衰减 吸收钳法

Metallic communication cable test methods.Part 4-5:Electromagnetic compatibility (EMC).Coupling or screening attenuation.Absorbing clamp method

金属通信电缆试验方法 第4-6部分:电磁兼容 表面转移阻抗 线注入法

Metallic communication cable test methods.Part 4-6:Electromagnetic compatibility (EMC).Surface transfer impedance.Line injection method

金属通信电缆试验方法 第4-11部分：电磁兼容 跳线、同轴电缆组件、接连接器电缆的耦合衰减或屏蔽衰减 吸收钳法

Metallic communication cable test methods—Part 4-11: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of patch cords,coaxial cable assemblies,pre-connectorized cables—Absorbing clamp method

金属通信电缆试验方法 第4-12部分：电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法

Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method

金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法

Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method

有线电视网用同轴电缆.通用规范

Coaxial cables for cable television networks. General specifications

有线电视系统.物理发泡聚乙烯绝缘同轴电缆.入网技术条件和测量方法

Specifications and methods of measurement on coaxial cable with physically-foamed polyethylene insulation used in CATV systems

有线电视系统用分支器和分配器（5～1000MHz）入网技术条件和测量方法

Specifications and methods of measurement on system outlets(5～1000MHz)used for CATV systems

有限电视系统用射频同轴连接器技术要求和测量方法

Specifications and methods of measurement on Radio-frequency coaxical connector used in CATV systems

同轴通信电缆.第8-3部分:带固体聚四氟乙烯(PTFE)绝缘层的50-086型半柔性电缆用详细规格

Coaxial communication cables - Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

电缆组件 电缆 连接器和无源微波元件.用混响室法测量屏蔽衰减

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

金属通信电缆试验方法. 第4-10部分: 电磁兼容性 (EMC). 馈通和电磁垫片的传输阻抗和屏蔽衰减. 双同轴试验方法

Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method

金属通信电缆试验方法第4-10部分:电磁兼容性（EMC）馈通和电磁垫圈的传输阻抗和屏蔽衰减双同轴试验方法

Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial

金属电缆和其他无源元件试验方法第4-15部分:电磁兼容性（EMC）用三轴电池测量传输阻抗和屏蔽衰减或耦合衰减的试验方法

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenu

金属电缆和其他无源元件试验方法第4-15部分:电磁兼容性（EMC）测量传输阻抗和屏蔽衰减或三轴单元耦合衰减的试验方法

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenu

金属电缆和其他无源元件测试方法 第4-15部分：电磁兼容性 (EMC) 用三轴电池测量转移阻抗和屏蔽衰减或耦合衰减的测试方法

Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell

金属电缆和其他无源元件测试方法 第4-15部分：用三轴单元测量传输阻抗和屏蔽衰减或耦合衰减的电磁兼容性 (EMC) 相关测试方法

Metallic cables and other passive components test methods – Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell

金属电缆和其他无源元件测试方法 第 4-16 部分：电磁兼容性（EMC） 将频率范围扩展到较高频率以进行传输阻抗和低频以进行屏蔽衰减测量

Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin

金属通信电缆试验方法.第4-2部分:电磁兼容性(EMC).屏蔽和耦合衰减.注入夹紧法

Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC); Screening and coupling attenuation; Injection clamp method

金属通信电缆测试方法 第 4-4 部分：电磁兼容性（EMC） 测量高达 3 GHz 及以上的屏蔽衰减的测试方法，三轴法

Metallic communication cable test methods - Part 4-4: Electro Magnetic Compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method

金属通信电缆试验方法. 第4-5部分: 电磁兼容性(EMC). 耦合或屏蔽衰减. 吸收夹紧法

Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method

金属通信电缆试验方法.第4-7部分:电磁兼容性(EMC).测量迁移阻抗和屏蔽或耦合衰减的试验方法.管中管法

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method

金属电缆和其他无源元件试验方法第4-7部分:电磁兼容性（EMC）测量连接器和组件的传输阻抗Z_T和屏蔽衰减a_S或耦合衰减a_C的试验方法三轴管中管法

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a

金属电缆和其他无源元件试验方法第4-7部分:电磁兼容性（EMC）测量连接器和组件的传输阻抗Z_T和屏蔽衰减a_S或耦合衰减a_C的试验方法三轴管中管法

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a

金属电缆和其他无源元件试验方法 第4-7部分：电磁兼容性(EMC) 连接器和组件传输阻抗Zt、屏蔽衰减as或耦合衰减ac的测量试验方法 三轴管中管法

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Zt and screening attenuation as or coupling attenuation ac of connectors and assemblies - Triaxial t

金属电缆和其他无源组件测试方法 第4-7部分：电磁兼容性（EMC） 连接器和组件传递阻抗ZT及屏蔽衰减aS或耦合衰减aC的测试方法 三轴...

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxia...

金属通信电缆测试方法 第4-9部分：电磁兼容性 (EMC) 屏蔽平衡电缆的耦合衰减 三轴法（2.0 版）

Test Methods for Metallic Communication Cables – Part 4-9: Electromagnetic Compatibility (EMC) – Coupling Loss of Screened Balanced Cables @ Triaxial Method (Edition 2.0)

金属通信电缆试验方法 第4-9部分：电磁兼容性 (EMC) 屏蔽平衡电缆的耦合衰减 三轴法

Metallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method

金属通信电缆试验方法 第4-9部分：电磁兼容性（EMC） 屏蔽平衡电缆的耦合衰减 三轴法合并版

Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method CONSOLIDATED EDITION

金属通信电缆试验方法 第4-0部分 电磁兼容性(EMC) 表面传输阻抗与屏蔽衰减推荐范围间的关系

Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits

通信电缆 测试方法要求 第1-6部分 电气测试方法 电磁特性

Communication cables. Specifications for test methods. Part 1-6: Electrical test methods Electromagnetic performance

电缆组件、电缆、连接器和无源微波元件 混响室法屏蔽衰减测量（IEC 61726:2022）

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:2022)

金属电缆及其他无源部件的测试方法 第4-16部分 电磁兼容性（EMS） 高频扩展用于测量全传输阻抗 低频用于测量屏蔽衰减

Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements u...

金属缆线及其他无源元件的试验方法 第4-5部分：电磁兼容（EMS）传播衰减或屏蔽衰减 吸收钳方法（IEC 62153-4-5:2021）

Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method (IEC 62153-4-5:2021)

金属电缆和其他无源组件的测试方法 第4-7部分 电磁兼容性 (EMS) 测量连接器和组合的总传输阻抗 ZT 以及屏蔽衰减 aS 或耦合衰减 aC 的测试方法 三轴……

Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of co...

电缆组件、电缆、连接器和无源微波元件 混响室法的屏蔽衰减测量

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

金属通信电缆测试方法 第4-7部分：电磁兼容性

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - ...

金属电缆和其他无源元件试验方法 第4-15部分：电磁兼容性 (EMC) 转移阻抗和屏蔽衰减测量试验方法（或用三轴电池测量耦合衰减）

Metallic cables and other passive components test methods — Part 4-15: Electromagnetic compatibility (EMC) — Test method for measuring transfer impedance and screening attenuation — or coupling attenuation with triaxial cell

声音和电视广播接收器及相关美利体育官网首页网址 抗扰度特性 限值和测量方法 (IEC/CISPR 20:2006)

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (IEC/CISPR 20:2006); German version EN 55020:2007

Anechoic chambers - Part 1: Shield attenuation measurement; German version EN 50147-1:1996

Absorberraeume - Teil 1: Schirmdaempfungsmessung; Deutsche Fassung EN 50147-1:1996

电缆组件 电缆 连接器和无源微波元件 用混响室法进行屏蔽衰减测量（IEC 61726:2015）

Cable assemblies@ cables@ connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:2015); German version EN 61726:2015

同轴电缆 第9-1部分：针对模拟和数字信号传输的室内引下线同轴电缆的技术规范

Coaxial cables Part 9-1: Specification for indoor downconductor coaxial cables for transmission of analog and digital signals

射频和同轴电缆组件 第2-4部分：无线电和电视接收器用电缆组件详细规范 频率范围 0 MHz 至 3000 MHz IEC 61169-2 连接器（IEC 60966-2-4:2009）

Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz@ IEC 61169-2 connectors (IEC 60966-2-4:2009); German version EN 60966-2-4:2009

射频和同轴电缆组件 第2-6部分：无线电和电视接收器用电缆组件详细规范 频率范围 0 MHz 至 3000 MHz IEC 61169-24 连接器（IEC 60966-2-6:2009）

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz@ IEC 61169-24 connectors (IEC 60966-2-6:2009); German version EN 60966-2-6:2009