美利体育登录入口官网

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods for destructive testing of welds in metal - Fracture mechanics toughness tests (K(sub)lc(/sub), critical CTOD and critical J values)

断裂韧性测量的标准试验方法

Standard Test Method for Measurement of Fracture Toughness

使用单边缺口拉伸（SENT）样品测定金属材料断裂韧性的试验方法

Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens

金属材料 — 准静态断裂韧性的测试方法

Metallic materials — Unified method of test for the determination of quasistatic fracture toughness

审批制造商 DNV-CP-0348

Approval manufacturer DNV-CP-0348

金属材料 宽板拉伸试验方法

Metallic Materials - Tensile Testing of Wide Plates

油气输送管特殊性能试验方法 第2部分：单边缺口拉伸试验

Test methods for special properties of oil and gas transmission pipes Part 2: Unilateral notched tensile test

油气输送管特殊性能试验方法 第6部分：全尺寸拉伸试验

Test methods for special properties of oil and gas transmission pipes Part 6: Full-scale tensile test

第1部分：A36钢短裂纹和深裂纹CTOD断裂试样的分析比较 等

Part 1: An Analytical Comparison Of Short Crack And Deep Crack CTOD Fracture Specimens Of An A36 Steel; Part 2: The Effects Of Crack Depth On Elastic-Plastic CTOD Fracture Toughness; Part 3: A Comparison Of The J-Integral And CTOD Parameters For Shor...

第 1 部分：A516-70 中热影响区的冶金特征和断裂韧性试样的评估以及焊件中浅裂纹的影响以及 CTOD 标准的制定 等

Part 1: Metallurgical Characterization of the HAZ in A516-70 and Evaluation of Fracture Toughness Specimens and the Effect of Shallow Cracks in Weldments and the Development of CTOD Criteria; Part 2: Comparison of the CTOD Fracture Toughness of Simul...