美利体育登录入口官网

电缆、电线和导体的测试方法方法 5.5：防火测试 电路完整性

Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity

电气装置布线系统元件的防火和机械性能分类

Electrical installationsClassification of the fire and mechanical performance of wiring system elements

电气安装 电线系统元件的防火和机械性能分类

Electrical installations—Classification of the fire and mechanical performance of wiring system elements

电缆遇火特性分类

CablesClassification of characteristics when exposed to fire

着火条件下的电缆试验 电路完整性 第1部分：额定电压不超过 0.6/1.0 kV 且总电压至少为 830 °C 的电缆的火灾冲击试验方法直径超过20毫米

Tests for electric cables under fire conditions - Circuit integrity, Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

着火条件下的电缆试验 电路完整性 第2部分：额定电压不超过 0.6/1.0 kV 且总电压至少为 830 °C 的电缆的火灾冲击试验方法直径不超过20毫米

Tests for electric cables under fire conditions - Circuit integrity, Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

火灾条件下的电缆试验 电路完整性 方法 2：额定电压不超过 0.6/1.0 kV 且外径不超过 20 mm 的电缆在温度至少 830 °C 下的火灾和冲击试验方法

Tests for electric cables under fire conditions — Circuit integrity, Method 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

火灾条件下的电缆试验 电路完整性 第3部分：在至少 830 °C 的温度下对额定电压达到并包括 0.6/1.0 kV 的电缆进行火灾冲击试验方法 在金属中进行测试外壳

Tests for electric cables under fire conditions - Circuit integrity, Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

火灾条件下的电缆试验 电路完整性 方法 3：在金属外壳中测试的额定电压不超过 0.6/1.0 kV 的电缆 在至少 830 °C 的温度下进行火灾和冲击试验方法

Tests for electric cables under fire conditions — Circuit integrity, Method 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV tested in a metal enclosure

电缆 受火影响时烟雾和腐蚀性气体排放量较低的 300/500 V 耐火、屏蔽、固定安装电缆规范 多芯电缆

Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables

受火影响时烟雾和腐蚀性气体排放量低的 300 / 500 V 耐火电缆规范 - 第2部分：多对电缆

Specification for 300 / 500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire — Part 2 : Multipair cables

电缆. 未受保护电缆的耐火试验 (P等级)

Electric cables. Fire resistance test for unprotected electric cables (P classification)

评定防火试验下光缆内光纤线路完整性的程序

Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

多核和对称双线/四线缆用于数字通信 对称双线/四线缆适用于水平地板布线 传输特性高达1000 MHz 并具有防火性能特点 节选…

Multicore and symmetrical pair/quad cables for digital communications - Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance characteristics. Sectional…

耐火电源、仪表、控制和数据电缆电路完整性防火测试标准

Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables

在火焰条件下测试电缆 保持绩效 第12部分：测试美利体育官网首页网址 暴露于温度至少为 830 度的火焰中 与机械冲击同时发生

Tests for electric cables under fire conditions. Circuit integrity. Part 12. Apparatus. Fire with shock at a temperature of at least 830° C

船舶电气美利体育官网首页网址 第353部分：额定电压 1kV 和 3kV 电力电缆

Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV

电缆在着火条件下的试验.电路完整性.第11部分:仪器.火焰温度等于高于750 °C时的孤立火焰

Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

电缆在着火条件下的试验.电路完整性.第1部分:额定电压高达(和包括)0.6/1.0 KV，全径大于20 mm的电缆在温度不低于830°C的冲击火焰下的试验方法

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

着火条件下电缆的试验.电路完整性.第1部分:额定电压0.6/1.0 kV及以下 总直径超过20 mm的电缆在至少830°C温度下冲击着火的试验方法

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0

着火条件下电缆的试验 电路完整性 第21部分:程序和要求 额定电压0.6/1.0kV及以下的电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV

着火条件下电缆的试验 电路完整性 第23部分:程序和要求 电数据电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables

着火条件下电缆的试验 电路完整性 第25部分:程序和要求 光缆

Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables

着火条件下电缆的试验.电路完整性.第2部分:额定电压高达和包括0.6/1.0 KV,全径不超过20 mm的电缆在温度不低于830°C的冲击火焰下的试验方法

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

着火条件下电缆的试验.电路完整性.第2部分:额定电压0.6/1.0 kV及以下 总直径不超过20 mm的电缆在至少830°C温度下冲击着火的试验方法

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0

着火条件下电缆的试验.电路完整性.第3部分:在金属外壳中试验的额定电压0.6/1.0 kV及以下电缆在至少830°C温度下冲击着火的试验方法

Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0

火灾条件下电线电缆的试验 电路完整性 第4部分：高于1 kV至及包括30 kV电压等级电线电缆在至少830 °C温度冲击下的火焰试验方法

Tests for electric cables under fire conditions – Circuit integrity – Part 4: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage higher than 1 kV up to and including 30 kV

数字通信用多芯对称对/四芯电缆 第15部分：传输特性高达 1 000 MHz 且具有耐火性能特性的水平地板布线用对称对/四芯电缆 分段规范

Multicore and symmetrical pair/quad cables for digital communications - Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance characteristics - Sectional spec

船舶电气装置第370部分:包括射频电缆在内的电信和数据传输电缆的选择指南

Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables

使用碳氢化合物池火测试协议测试耐火、电路完整性电缆和电缆系统的 IEEE 标准

IEEE Standard for Testing Fire-Resistive, Circuit Integrity Cables and Cable Systems Using a Hydrocarbon Pool Fire Test Protocol

确定核设施耐火电缆电路完整性性能的标准测试程序

Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities

使用碳氢化合物池火测试协议测试耐火、电路完整性电缆和电缆系统的 IEEE 标准

IEEE Standard for Testing Fire-Resistive, Circuit Integrity Cables and Cable Systems Using a Hydrocarbon Pool Fire Test Protocol

IEEE 标准 1810?-2017

IEEE Std 1810?-2017

确定核设施耐火电缆电路完整性性能的 IEEE 标准测试程序

IEEE Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities

核设施中耐火电缆电路完整性性能确定的IEEE标准

IEEE Standard for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities

用于确定客运铁路和公路隧道中耐火电缆系统电路完整性性能的 IEEE 标准测试程序

IEEE Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cable Systems in Passenger Rail and Road Tunnels

通信电缆 试验方法技术要求 第4-16部分 环境效应试验方法 火灾条件下的电路完整性

Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions

执行光缆完整性测试时的耐火性检验用光纤电缆链路完整性的标准程序

Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

电缆防火试验 电路完整性 第1部分：额定电压0.6/1.0 kV及以下、绝缘截面大于20 mm?的电缆在至少830°C温度下的火和冲击试验方法 (IEC 60331-1:2018)

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm (IE...

船舶用低烟无卤电缆详细规范

Detail Specification for Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use

防火电缆试验

UL Standard for Safety Tests for Fire Resistive Cables

耐火电力、仪表、控制和数据电缆的电路完整性防火测试安全标准

Standard for Safety - Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables

通信电缆 测试方法规范 第4-16部分：环境测试方法 火灾条件下的电路完整性

Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions

在耐火测试下评估电缆中光纤电路完整性的程序

Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

电缆在火焰条件下的试验 电路完整性 第1部分:额定电压 0 6/1 0 kV 及以下、总直径超过 20 mm 的电缆在至少 830°C 温度下的冲击燃烧试验方法 (IEC

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0@6/1@0 kV and with an overall diameter exceeding 20 mm (IEC

火焰条件下电缆试验 电路完整性 第21部分：程序和要求 额定电压 0 6/1 0 kV 及以下电缆（IEC 60331-21:1999）

Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0@6/1@0 kV (IEC 60331-21:1999)