美利体育登录入口官网

气瓶安全装置

Gas cylinder safety device

热塑性塑料管和配件用60和xb0锥管螺纹的标准规范

Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings

可移动气瓶 25E用于阀门与气瓶连接的锥螺纹第2部分：仪表检查

Transportable gas cylinders -25E taper thread for connection of valves to gas cylinders Part 2. Gauge inspection

气瓶.气瓶阀门连接用17E和25E椎管螺纹.规范

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Specifications

并联和锥形管螺纹手用丝锥. 通用尺寸和标记

Hand taps for parallel and taper pipe threads. General dimensions and marking

铜在乙炔服务中的使用

Use of Copper in Acetylene Service

带有切割环的非焊接压缩配件.带锥形螺纹末端的肘形螺栓(不用于新设计)

Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design)

带有切割环的非焊接压缩配件.带锥形螺纹末端的分支T形螺栓(不用于新设计)

Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)

带切割环的非焊接压缩配件 - 带锥形螺纹螺柱端部的分支 T 型螺柱（不适用于新设计）

Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)

瓶体试验压力小于等于300 bar的气瓶阀. 第7部分: 锥形螺纹W 31,3 × 1/14用量规(乙炔)

Gas cylinder valves for cylinder test pressures up to 300 bar - Part 7: Gauges for tapered thread W 31,3 × 1/14 (acetylene)

可移动式气体钢瓶 25E 锥形螺纹连接阀的圆规检验 第二部分: 圆规检查

Portable gas cylinders 25E Compass inspection of conical threaded connection valves Part 2: Compass inspection

气瓶.气瓶阀门连接用17E和25E椎管螺纹.第1部分:规格

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010 + Cor. 2:2012); German version EN ISO 11363-1:2010 + AC:2012

气瓶 用于将阀门连接到气瓶的 17E 和 25E 锥螺纹 第1部分：规格

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018); German version EN ISO 11363-1:2018 / Note: To be amended by DIN EN ISO 11363-1/A1 (2023-02).

气瓶.气瓶阀门连接用17E和25E椎管螺纹.第2部分:检验计量表(ISO 11363-2-2010).德文版本EN ISO 11363-2-2010

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2010); German version EN ISO 11363-2:2010

气瓶.阀门与气瓶连接用17E和25E锥形螺纹.第1部分：规范

Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications

气瓶阀门与气瓶连接用17E和25E锥形螺纹第1部分:规范修改1

Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications — Amendment 1

照相机 快线接头及快线座

Shutter cable release tip and socket for cameras

气体气瓶 锥形螺纹 17E和25E 用于连接气体气瓶的阀口 第1部分：规范（ISO 11363-1:2018）

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)

气瓶 与气瓶连接的阀门用的17E和25E锥螺纹 第2部分：检验规（ISO 11363-2:2017）

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)

石油和天然气工业 铝合金钻杆螺纹连接量规（ISO 27627:2014）

Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014)

气瓶 用于将阀门连接到气瓶的 17E 和 25E 锥螺纹 第1部分：规格

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)