美利体育登录入口官网

商用飞机内空气质量 附录a

ANSI/ASHRAE Addendum a to ANSI/ASHRAE Standard 161-2018 Air Quality within Commercial Aircraft

橡胶的试验方法.测定硫化或热塑性橡胶耐臭氧裂化性.动态应变试验

Methods of test for rubber - Determination of the resistance of vulcanized or thermoplastic rubbers to ozone cracking - Dynamic strain test

家用和类似用途电器 安全 空气净化器具的特殊要求

Special requirements for safe air purifying appliances for household and similar electrical appliances

橡胶 硫化或热塑性塑料 耐臭氧龟裂 静态和动态应变测试

Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing

橡胶 硫化或热塑性塑料 耐臭氧龟裂 测定实验室测试室中臭氧浓度的参考和替代方法

Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers

环境空气-紫外光度法测量臭氧浓度的标准方法

Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).

焊接及相关工艺的健康与安全 烟气和气体采样实验室方法 第 3 部分：电弧焊过程中臭氧排放率的测定

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding

橡胶管和塑料管.静态条件下抗臭氧能力的评估(ISO 7326:2006),DIN EN ISO 7326:2009-10的英文版本

Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2006); English version of DIN EN ISO 7326:2009-10

硫化橡胶或热塑性橡胶 耐臭氧开裂 第3部分：确定实验室试验箱中臭氧浓度的参考和替代方法

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers

硫化或热塑性橡胶 耐臭氧龟裂性 第3部分：测定实验室测试室中臭氧浓度的参考和替代方法

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)

硫化橡胶或热塑性橡胶 耐臭氧开裂 第1部分：静态和动态应变试验

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

橡胶 硫化或热塑性 - 耐臭氧裂纹 - 第3部分:用于确定实验室试验室中臭氧浓度的参考和替代方法

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers

用于水和废水（包括其他氧化用途）的臭氧处理美利体育官网首页网址 美利体育官网首页网址规格及臭氧浓度测量方法

Ozone treatment apparatus for water and wastewater including other oxidation uses-Specifications of apparatus and measurement methods for ozone concentration

硫化或热塑橡胶. 耐臭氧性的测定. 第2部分: 臭氧浓度的测定

Rubber, vulcanized or thermoplastic -- Determination of ozone resistance -- Part 2: Determination of the ozone concentration

硫化或热塑性橡胶 - 耐臭氧龟裂性 - 第 1 部分：静态和动态伸长率测试

Vulcanized or thermoplastic rubber - Resistance to ozone cracking - Part 1: Tests under static and dynamic elongation

消毒美利体育官网首页网址—臭氧发生器

Ozone Generators

橡胶 硫化或热塑性 耐臭氧开裂性能 第1部分：静态和动态应变试验（ISO 1431-1:2022 IDT）

Rubber, vulcanised or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing (ISO 1431-1:2022, IDT)

硫化橡胶和热塑性橡胶 耐臭氧龟裂 第2部分:动态应变试验

Rubber, vulcanized and thermoplastic - Resistanceto ozone cracking - Part 2: Dynamic strain test

橡胶、硫化或热塑性橡胶 臭氧裂解抵抗力 第3部分：实验室测试舱确定臭氧浓度的参考和替代方法（ISO 1431-3:2017 等同）

Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017, IDT)

安全用电家和类似用途的器具 第2部分：空气净化器具的特殊要求（IEC 335-2-65:1993 修改）

Safety of electrical and similar appliances - Part 2: Particular requirements for air cleaning appliances (IEC 335-2-65:1993 modified)

安全用电器美利体育官网首页网址和类似用途 第2-65部分：空气净化装置的特殊要求（IEC 60335-2-65:1993 修改 + A1:2000）

Safety of electrical equipment and similar purposes Part 2-65: Particular requirements for air cleaning devices (IEC 60335-2-65:1993 Modification + A1:2000)

家用和类似用途电器的安全 第2-65部分：空气净化器的特殊要求

Safety of household and similar electrical appliances - Part 2-65: Particular requirements for air purifiers