粒度组成是不同粒径颗粒在材料中的质量分数分布情况,通过筛分法测定各粒径等级的质量百分比。具体而言,它指材料中不同大小颗粒(颗粒群)的分布状态,是衡量粉末冶金、滑石粉等产品质量的核心指标,直接影响物料的堆积密度、流动性和反应活性。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ASTM C136-06 Test Method |
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
筛分 集料 |
2006 美国材料与试验协会 |
| GB/T 2481.1-2025 试验 |
固结磨具用磨料 粒度组成的美利体育登录入口官网和标记 第1部分:粗磨粒F4~F220 Determination and marking of the particle size distribution of abrasive materials for bonded abrasives - Part 1: Coarse grains F4 to F220
标准砂 |
2025-08-01 国家市场监督管理总局 |
| GB/T 5150-2004 CP |
Aluminium-magnesium alloy powder
|
2004-04-30 国家市场监督管理总局 |
| GOST 13084-1988 规范 |
Powders of high-alloyed steels and alloys. Specifications
化学组成 |
1988 俄罗斯标准局 |
| GOST 14050-1993 规范 |
Limestone meal (dolomit). Specifications
|
1993 俄罗斯标准局 |
| GOST 17818.2-1990 试验 |
Graphite. Method for determination of granulometric composition
石墨 筛分 |
1990 俄罗斯标准局 |
| GOST 19283-1993 试验 |
Microtalc. Methods for determination of dispersion composition
沉降法 |
1993 俄罗斯标准局 |
| GOST 19286-1977 试验 |
Concentrated kaolin. Determination of size distribution
富集高岭土 筛分分析 |
1977 俄罗斯标准局 |
| GOST 19728.20-2001 试验 |
Talc and talcomagnesite. Method for determination of granularity
滑石 |
2001 俄罗斯标准局 |
| GOST 22310-1993 试验 |
Ferroalloys. Method for determination of granulometric composition
筛分分析 铁合金 |
1993 俄罗斯标准局 |
| GOST 22552.7-1977 试验 |
玻璃工业用的石英砂、锤碎的砂石、石英岩、脉石英.粒度成分测定法 Quartz sand, ground sandstone, quartzite and veiny quartz for glass industry. Method for determination of grain-size distribution
石英砂 筛分分析 |
1977 俄罗斯标准局 |
| GOST 22567.2-1977 试验 |
Synthetic detergents. Method for determination of granulometric composition
合成洗涤剂 筛分 |
1977 俄罗斯标准局 |
| GOST 23782-1996 试验 |
Sponge titanium. Method for determination of fractional composition
海绵钛 筛分 |
1996 俄罗斯标准局 |
| GOST 25469-1993 试验 |
Alumina. Sieve method for the determination of particle size distribution
筛分分析 |
1993 俄罗斯标准局 |
| GOST 27707-2007 试验 |
Unshaped refractories. Methods for determination of grain composition
筛分分析 |
2007 俄罗斯标准局 |
| GOST 32989.1-2014 试验 |
固体生物燃料. 粒度分布的测定. 第1部分. 使用筛子孔径大于或等于1 mm的振动筛方法 Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 1 mm and above
筛分分析 |
2014 俄罗斯标准局 |
| GOST 32989.3-2014 试验 |
固体生物燃料. 粒度分布的测定方法. 第3部分. 旋转式筛分法 Solid biofuels. Determination of particle size distribution. Part 3. Rotary screen method
|
2014 俄罗斯标准局 |
| GOST 33620-2015 试验 |
Brow coals, hard coals and anthracite. Method for determination of strength in jar
|
2015 俄罗斯标准局 |
| GOST 3594.12-1993 试验 |
Moulding refractory clays. Method for determination of size distribution by sieving clays
筛分分析 粘土 |
1993 俄罗斯标准局 |
| GOST R 52381-2005 试验 |
Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
粒度 |
2005 俄罗斯标准局 |
| GOST R 53173-2008 试验 |
Automobile roads of the general using. Road marking wares. Glass beads. Test methods
|
2008 俄罗斯标准局 |
| GOST R 54230-2010 试验 |
Solid recovered fuels. Determination of particle size distribution by screen method
固体燃料 筛分法 |
2010 俄罗斯标准局 |
| GOST R 54230-2010(2019) 试验 |
Solid recovered fuels. Determination of particle size distribution by screen method
固体燃料 筛分法 |
2010-01-01 俄罗斯标准局 |
| GOST R 55550-2013 试验 |
Solid biofuels. Determination of particle size distribution of disintegrated pellets
生物燃料 |
2013 俄罗斯标准局 |
| GOST R 55566-2013 试验 |
固体再生燃料. 粒度分布测定. 第1部分. 小尺寸颗粒的筛选方法 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles
筛分法 |
2013 俄罗斯标准局 |
| HB 5441.1-1989 试验 |
Performance testing of powder metallurgy products and powders - Sieving method for determining particle size of metal powders
试验筛 |
1990-04-11 行业标准-航空 |
| JB/T 12542-2015 规范 |
Superabrasive.Detonation polycrystalline diamond powders
|
2015-10-10 行业标准-机械 |
| JB/T 3294-2017 规范 |
Common abrasive boron carbide
|
2017-11-07 行业标准-机械 |
| JB/T 3629-2025 规范 |
Conventional abrasive—Black fused alumina
|
2025-04-10 行业标准-机械 |
| JB/T 7987-2012 规范 |
Conventional abrasive.Microcrystalline fused alumina
|
2012-05-24 行业标准-机械 |
| JB/T 7990-2025 规范 |
Superabrasive—Cubic boron nitride micropowders
|
2025-04-10 行业标准-机械 |
| JB/T 7996-2012 规范 |
Conventional abrasive.Monocrystalline fused alumina
|
2012-05-24 行业标准-机械 |
| JB/T 8337-2012 规范 |
Conventional abrasive.Garnet
|
2012-05-24 行业标准-机械 |
| T/CFA 0202031.5-2021 规范标准 |
General technical specifications for foundry silica sand -Part 5:Roasted silica sand
颗粒形状 |
2021-06-18 中国团体标准 |
| YB/T 105-2014 试验标准 |
Methods of physical testing for metallurgical lime
|
2014-05-06 行业标准-黑色冶金 |
| YB/T 105-2025 试验 |
Physical Testing Methods for Metallurgical Lime
反应性 |
2025-12-17 行业标准-黑色冶金 |
| YS/T 1334-2019 规范 |
Diffused tin bronze powder
|
2019-08-02 行业标准-有色金属 |
| YS/T 1564-2022 规范 |
Copper clad graphite composite powder
|
2022-09-30 行业标准-有色金属 |
| YS/T 258-2011 规范 |
Niobium powder for metallurgy
|
2011-12-20 行业标准-有色金属 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-05 03:21