美利体育登录入口官网

用水循环分批提取废物的标准试验方法

Standard Test Method for Sequential Batch Extraction of Waste with Water

废弃物单批量抽取法的标准试验方法

Standard Test Method for Single Batch Extraction Method for Wastes

废物单批提取法的标准试验方法

Standard Test Method for Single Batch Extraction Method for Wastes

用湿度计测定固体材料实验室风化的标准试验方法

Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

测定水浸后缓冲材料的火灾试验响应特性变化的标准试验方法

Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

测定缓冲材料在水浸后燃烧试验响应特性变化的标准试验方法

Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

通过其对水质的影响确定与人类用水接触的非金属产品的适用性. 试验方法. 金属的提取

Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water.Methods of test.The extraction of metals

土工合成物隔层.耐浸出性测定的试验方法

Geosynthetic barriers. Test method for determining the resistance to leaching

废物表征 浸出行为测试 酸碱中和能力测试

Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test

有色金属的无铬 (VI) 钝化 - 第 2 部分：铝和铝合金

Chromium(VI) free passivation of non-ferrous metals - Part 2: Aluminium and aluminium alloys

废弃物特征.基本特性描述用浸出试验.固定式试验条件下带有周期浸出液补充的动态整体浸出试验.德文版本CEN/TS 15863-2012

Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions; German version CEN/TS 15863:2012

废弃物特性.浸析.颗粒废弃物和污泥浸析的一致性试验.第3部分:高固体含量的粒径小于4mm的材料在液体与固体比为 2 l/kg 和 8 l/kg 时的二级分批试验(有或无粒径缩减); 德文版本 EN 12457-3:2002

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm (

废弃物的表征.浸析.颗粒废弃物和污泥浸析一致性试验.第4部分:粒径小于10mm的材料在液体、固体比为10 l/kg的一级分批试验(有或无有限粒径缩减)

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu

土工合成阻挡层.防渗漏测定的试验方法

Geosynthetic barriers - Test method for determining the resistance to leaching; German version EN 14415:2004

土工合成屏障 测定抗浸出性的试验方法

Geosynthetic barriers - Test method for determining the resistance to leaching; German version EN 14415:2004

废弃物特性描述 过滤性能试验 pH值对连续pH值控制过滤的影响（草案）

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control

油漆和清漆 测定间歇性与水接触的涂料中受管制危险物质释放的实验室方法（草案）

Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water

色漆和清漆.间歇水接触性涂料物质排放的实验室测定方法.德文版 EN 16105-2011

Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water; German version EN 16105:2011

油漆和清漆 测定间歇性与水接触的涂料中受管制危险物质释放的实验室方法

Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water; German version EN 16105:2023

集料化学性能的试验.第3部分:采用沥滤法对洗出液的制备; 德文版本 EN 1744-3:2002

Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates; German version EN 1744-3:2002

骨料化学性质试验第3部分：骨料浸出制备洗出液

Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates; German version EN 1744-3:2002

土壤质量 用于后续化学和生态毒理学测试的土壤和土壤材料淋洗程序 第4部分：添加前酸/碱调节对pH值的影响 (ISO/TS 21268-4:2007)

Soil quality - Procedure for washing soil and soil materials for subsequent chemical and ecotoxicological testing - Part 4: Effect of acid/base adjustment on pH before addition (ISO/TS 21268-4:2007)

木材防腐剂.经处理的木制活性剂和其他防护剂成分释放量测定方法.第2部分:水或人造海水洗净法测定释放量用分析试样的实验室制备

Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 2: Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water;

放射性废物.固态放射性废料的长时浸出测试

Radioactive waste. Long time leach testing of solidified radioactive waste forms

固体废物.浸出毒性浸出方法.醋酸缓冲溶液法

Solid waste. Extraction procedure for leaching toxicity. Acetic acid buffer solution method

环境质量 水质 浸出 结构完整性提取和测试程序

Environmental quality - Water quality. Leaching. Extraction procedure and structural integrity test.

废物描述 冲洗行为测试 酸碱中和能力测定

Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test

废物描述 浸出 粒状废物中浸出物质与污泥成分符合性测试 第1部分 液固比为2 L/kg的单批次（样品）测试

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (wit...

皮革 皮革中六价铬含量的化学测定 第1部分：分光光度法（ISO 17075-1:2017）

Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method (ISO 17075-1:2017)

合成运动场系统 淋溶试验

Synthetic sport systems - Leaching test

油漆和清漆 与水间歇接触时涂层释放物质的实验室测定方法

Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water

涂料和清漆 与间歇性接触水的涂层中受控危险物质释放量的实验室测定方法

Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water

油漆和清漆 测定与水间歇接触的涂层释放物质的实验室方法

Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water