美利体育登录入口官网

ISO公制机械螺丝

ISO metric machine screws

ISO公制机械螺丝

ISO metric machine screws

螺钉和垫圈组件:SEMS(公制系列)

Screw and Washer Assemblies: SEMS (Metric Series)

螺钉和垫圈组件：SEMS（公制系列）

Screw and Washer Assemblies: SEMS (Metric Series)

统一机用螺钉与机用螺母规范

Specification for unified machine screws and machine screw nuts

机器螺钉和机器螺钉螺母规范 — 公制系列

Specification for Machine screws and machine screw nuts — metric series

米制细牙螺纹

Metric fine screw threads

螺栓、螺钉和螺柱.一般用途螺栓的标称长度及螺纹长度

Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts

有色金属紧固件的机械性能

Mechanical properties of non-ferrous metal fasteners

机用螺钉 六角头，全柄，耐腐蚀和耐热钢，UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A

SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A

螺丝，机械钢 UNS G87400，镀镉板，钻孔，1 孔，六角头，.1380-40 UNJF-3A

SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A

螺丝，机用钢 UNS G87400，镉板，钻孔，1 孔六角头，.1640-36 UNJF-3A

SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A

机用螺钉 双六角加长垫圈头 耐腐蚀和耐热钢 UNS S66286 最小 130 KSI .1380-40 UNJF-3A

SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION- AND HEAT-RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A

机用螺丝 双六角，加长垫圈头，钻孔，镀银，镍合金（UNS N07001），.1380-40 UNJF-3A

SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A

机用螺丝 双六角，加长垫圈头，钻孔，PD 柄，镀银镍合金（UNS N07001），.1640-36UNJF-3A

SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATE NICKEL ALLOY (UNS N07001), .1640-36UNJF-3A

机用螺钉的紧固件部分标准

Fastener Part Standard Machine Screws

机械螺钉的机械性能和质量要求

Mechanical and Quality Requirements for Machine Screws

螺栓，机器，花键驱动，特殊加长垫圈，缩头，PD 柄，UNS N07718，公制

BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, UNS N07718, METRIC