美利体育登录入口官网

气体燃料供应用地埋高强度聚（氯乙烯）（PVC－HI）管线系统．最高工作压力为1巴（100 kPa）的管道（ISO 6993－1：2006，MOD）

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)

塑料测试方法 热塑性塑料管道、配件和阀门 用于输送流体的热塑性塑料管道 标称外径和标称压力 英制系列

Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series

塑料管道系统.压注热塑管件,阀门和辅助美利体育官网首页网址.注塑热塑材料管件持久静液压强度的测定

Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings, Valves and Ancillary Equipment - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials for Injection Moulding of Piping Components

塑料管材和配件 - 用于输送气体燃料的交联聚乙烯（PE-X）管道系统 - 公制系列 - 规范 - 第1部分：管道

Plastics pipes and fittings — Crosslinked polyethylene (PE - X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1 : Pipes

聚乙烯(PE)管道 PE 80、PE 100 尺寸

Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English / Note: To be replaced by DIN 8074 (2022-03).

供水用塑料管道系统 聚乙烯 (PE) 第1部分：概述

Plastic piping systems for water supply Polyethylene (PE) Part 1: General

供水用塑料管道系统 – 未增塑聚氯乙烯 (PVC-U) – 第2部分：管道

Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Pipes

燃气输送用塑料管道系统.聚乙烯(PE).第1部分:综述;德文版本EN 1555-1-2010

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2010

供水和排水、污水及灌溉用塑料管材系统 定向未增塑聚氯乙烯（PVC-O） 第二部分：管子 修改1

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure — Oriented unplasticized poly(vinyl chloride) (PVC-O) — Part 2: Pipes — Amendment 1

压力设施管材和管件用热塑性塑料.分类、命名和设计系数(ISO 12162-2009).德文版本EN ISO 12162-2009

Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009); German version EN ISO 12162:2009

压力应用管道和配件用热塑性材料 分类、名称和设计系数

Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009); German version EN ISO 12162:2009

聚乙烯管道和配件在燃气和供水系统的使用

Application of PE 80, PE 100 and PE-Xa for gas and water distribution systems

PVC-O管道的供水分配技术规范

Technical Specification for Water Distribution in PVC-O Pipes

燃气用聚乙烯管道系统 第1部分：通用要求与聚乙烯化合物

Polyethylene piping systems for gas use Part 1: General requirements and polyethylene compounds

用于供水、排水和带压污水处理的塑料管道系统 聚乙烯（PE） 第1部分：一般要求

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Part 1. General requirements

电气装置．布线规则指南

Electrical installations - Guide to using the Wiring rules

工业用塑料管道系统.聚偏氟乙烯(PVDF).部件和系统的规范

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system

压力设施管材和管件用热塑性塑料.分类、命名和设计系数

Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient

供水、地下及地上压力排水和污水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:总则

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General

输送流体的热塑性塑料管材—公称外径和公称压力—第1部分：公制系列 修改件1

Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series AMENDMENT 1

塑料管道系统.聚烯烃管和机械装配.耐端点负荷的试验方法(AREL试验)

Plastics piping systems - Polyolefin pipes and mechanical fitting assemblies - Test method for the resistance to end load (AREL test)

塑料管道系统.给水用聚乙烯(PE)管和管件.第1部分:总则

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General

输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.第1部分:最大操作压力为1巴(100 kPa)的管子

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)

通用聚乙烯管

Polyethylene pipes for general purposes

气体燃料供应用聚乙烯管配件.第1部分:热熔配件

Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 1: Heatfusion fittings

更新地下燃气管网用塑料管道系统 第3部分：紧密内衬管道的内部修补（ISO 11299-3:2018）

Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)

塑料管道系统.给水用聚乙烯(PE)管和管件.第1部分:总则

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General

塑料给水及埋地和地上排水压力管系统 未增塑聚氯乙烯（PVC-U） 第2部分：管子 （ISO 1452-2:2009）

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)

压力下用于给水和埋地及地上排水的塑料管道系统 未增塑聚氯乙烯（PVC-U） 第4部分：阀门（ISO 1452-4:2009）

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)

塑料管道和配件 输送气体燃料用交联聚乙烯（PE-X）管道系统 公制系列 规范 第1部分：管道

Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 1: Pipes

最大工作压力至并包括0.4 MPa（4巴）的气体燃料用塑料管系统 第1部分：通用要求（ISO 15439-1:2007 等同）

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) - Polyamide (PA) - Part 1: General (ISO 15439-1:2007, IDT)

热塑性材料 测定模塑材料静水强度用管状试件的制备

Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for moulding

最大工作压力达 2 MPa (20 bar) 的气体燃料供应用塑料管道系统 聚酰胺 (PA) 第1部分：通用要求 (ISO 22621-1:2007, IDT)

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 2 MPa (20 bar) - Polyamide (PA) - Part 1: General (ISO 22621-1:2007, IDT)

埋设用聚乙烯（PE）管 气体燃料供应 公制系列 技术规范（ISO 4437:2007 等同采用）

Buried polyethylene (PE) pipes for the supply of gaseous fuels - Metric series - Specifications (ISO 4437:2007, IDT)

埋设的高影响聚氯乙烯（PVC-HI）气体燃料输送管道系统 第1部分：最高工作压力为1巴（100千帕）（ISO 6993-1:2006 等同采用）

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, IDT)