美利体育登录入口官网

紧固件的机械性能 公称直径 1mm 至 10mm 的螺栓和螺钉的扭转试验和最小扭矩

Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

紧固件 技术规范 第31部分：性能等级 10.9 的米制滚丝螺钉，带有额外硬化的螺纹成型区

Fasteners - Technical specifications - Part 31: Metric thread rolling screws of property class 10.9 with additionally hardened thread forming zone

自钻螺丝与嵌头螺纹紧固件 尺寸、要求和测试

Self-drilling screws and insert-threaded fasteners, dimensions, requirements and tests

紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm 的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992); 德文版本 EN 20898-7:1995

Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995

机械连接件的力学性能. 第7部分：扭转试验及最小断裂扭矩

Mechanical properties of fasteners; torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

外科植入物.不对称螺纹和球形下表面的金属接骨螺钉.机械要求和试验方法

Implants for surgery. Metal bone screws with asymmetrical thrend and spherical under-surface. Mechanical requirements and test methods

外科植入物 金属骨螺钉 第3部分：HA型和HB型不对称螺纹螺钉的机械性能和试验方法

Implants for surgery. Metal bone screw. Part 3 - Mechanical requirements and test methods of screws with HA y HB types asymmetrical thread.

航空航天.自锁螺纹轴环.扭矩和预载荷的试验方法

Aerospace - Collar, threaded, self-locking - Test method for torque and preload

紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm

Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

紧固件的机械特性.第7部分:扭力试验和标称直径为1mm-10mm的螺栓和螺钉的最小扭矩

Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

紧固件机械性能 第7部分：公称直径1毫米至10毫米的螺栓和螺钉的扭转试验和最小扭矩（ISO 898-7:1992）

Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)

紧固件的机械性能 第7部分：标称直径为 1 毫米至 10 毫米的螺栓和螺钉的扭转试验和最小扭矩 （ISO 898-7:1992）

MECHANICAL PROPERTIES OF FASTENERS. PART 7: TORSIONAL TEST AND MINIMUN TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (ISO 898-7:1992).