美利体育登录入口官网

固定源排放 确定砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒的总排放量

Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定源排放.用气相色谱测定甲烷浓度的手工方法

Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography

固定源排放.永久安装监测系统用自动测量气体排放浓度的抽样

Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems

固定源辐射.气体和粒子相多环芳香烃的测定.取样

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sampling

固定源辐射.气相和粒子相多环芳香烃的测定.样品准备、净化和测定

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sample preparation, clean-up and determination

空气质量-固定源排放测量-制定标准化方法的指导方针

Guidelines for the elaboration of standardised methods for the measurement of stationary source emissions in air quality

固定源排放. 二氧化碳体积浓度的测定. 参考方法: 红外光谱法; 德文版 CEN/TS 17405-2020

Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020

固定源排放甲醛质量浓度手动测定方法参考方法

Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021

固定源排放.测定废气中低浓度全部气态有机碳的质量浓度.连续火焰电离探测器法.德文版本EN 12619-2013

Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013

固定污染源排放 砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒总排放量的测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定源排放硫氧化物质量浓度的测定标准参考方法

Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017

固定源排放 数据采集和处理系统 第2部分：数据采集和处理系统要求的规范（草案）

Stationary source emissions - Data acquisition and handling systems - Part 2: Specification of requirements on data acquisition and handling systems

固定源排放 气相色谱测定甲烷浓度方法手册（草案）

Handbook of Methods for Determining Methane Concentration by Gas Chromatography from Stationary Source Emissions (Draft)

固定源排放.气相色谱测定甲烷浓度方法手册(ISO 25139-2011).德文版本EN ISO 25139-2011

Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011

固定源排放限值.用火焰电离探测(FID)测定甲烷浓度用自动方法(ISO 25140-2010).德文版本EN ISO 25140-2010

Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010

站点源头排放.气体和粒子相多环芳烃的测定.第1部分:取样

Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Part 1. Sampling

环境空气质量 固定源排放 干基气体分析方法用于测定摩尔质量

Environmental quality - Air quality. Emissions from stationary sources. Gas analysis method for the determination of dry molecular weight.

环境质量 空气质量 固定源排放 第3部分：烟囱或排气管道中燃烧源日平均排放中二氧化硫和二氧化碳的测定方法

Environmental quality - Air Quality. Emissions from stationary sources. Part 3 - Method for determination of sulphur dioxide and carbon dioxide in daily average emissions through stacks or evacuation ducts from fossil fuel combustion sources.

环境空气质量 空气质量 固定源排放 第4部分：碱性介质高锰酸钾比色法测定烟囱或排气管道废气中氮氧化物的方法

Environmental quality - Air quality. Emissions from stationary sources. Part 4 - Method for the determination of nitrogen oxides in emissions from stacks or evacuation ducts, by colorimetry with permanganate in alkaline medium.

环境质量 空气质量 固定源排放 第5部分 使用碱性介质中高锰酸钾离子色谱法测定烟囱或排放管道中氮氧化物排放的方法...

Environmental quality - Air quality. Emissions from stationary sources. Part 5 - Method for the determination of nitrogen oxides in emissions from stacks or evacuation ducts, by ion chromatography with permanganate in alkaline medium.

环境质量 空气质量 固定源排放 铬排放测定方法 等速采样法

Environmental quality - Air quality. Stationary sources. Determination of Chromium. Isokinetic Method.

固定源排放.气相和粒相多环芳香烃的测定.第1部分:取样

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling

固定源排放.气相和粒相多环芳香烃的测定.第2部分:样品制备、清洁和测定

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination

固定源排放.气相色谱测定甲烷浓度方法手册

Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography

固定源排放 二氧化硫质量浓度的测定 自动测量方法性能特征

Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods

固定源排放物 手工测定甲醛质量浓度的基准方法

Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

固定源排放物 排气中砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒的总浓度测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定污染源排放物 数据收集与处理系统 第一部分 数据处理与提交要求规范

Stationary source emissions - Data acquisition and handling systems - Part 1: Specification of requirements for the handling and reporting of data

稳态源排放物：确定生物质与化石燃料产生的二氧化碳比例 放射性碳样品的采集与测定（ISO 13833:2013）

Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013)

固定源排放 As、Cd、Cr、Co、Cu、Mn、Ni、Pb、Sb、Tl 和 V 总排放量的测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定源排放 标准化测量方法制定指南 结构和内容建议

Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content

固定污染源排放 甲醛质量浓度测定的 manual 方法 参考方法

Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

固定源排放 砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒的总排放量的测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定污染源排放 砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒总排放量的测定

Stationary source emissions — Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定源排放 数据采集和处理系统 第3部分：数据采集和处理系统性能试验要求的规定

Stationary source emissions - Data acquisition and handling systems - Part 3: Specification of requirements for the performance test of data acquisition and handling systems

固定污染源排放 PCDDs/PCDFs 和二恶英类 PCBs 的质量浓度测定 第4部分:二恶英类 PCBs 的采样和分析

Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs

固定污染源排放 气相和颗粒相多环芳烃的测定 第1部分：采样

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling

固定污染源排放 气相和颗粒相多环芳烃的测定 第2部分:样品制备、净化和测定

Stationary source emissions - Determination of gas and particle-phasepolycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination

固定源排放 砷、镉、铬、钴、铜、锰、镍、铅、锑、铊和钒总排放量的测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

固定污染源排放 As、Cd、Cr、Co、Cu、Mn、Ni、Pb、Sb、Tl 和 V 总排放量的测定

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V