特定入射角下物体表面反射光通量与标准玻璃镜面反射光通量的比值,表征材料表面反光特性。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AS 3894.8:2002(R2013) 试验标准 |
Field testing of protective coatings Visual determination of gloss
光泽 |
2013-1-1 澳大利亚标准协会 |
| ASTM C346-26 试验 |
Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
陶瓷材料 |
2026-03-01 美国材料与试验协会 |
| ASTM D4039-09(2015) 试验标准 |
Standard Test Method for Reflection Haze of High-Gloss Surfaces
|
2015-11-01 美国材料与试验协会 |
| ASTM D523-14(2018) Test Method |
Standard Test Method for Specular Gloss
|
2014 美国材料与试验协会 |
| BS 3424-28:1995 试验 |
Testing coated fabrics - Method 31 - Determination of specular gloss
镜面反射 |
1995-11-15 英国标准学会 |
| BS EN 13722:2004 试验 |
Furniture - Assessment of the surface gloss
测试单元 |
2004-09-20 英国标准学会 |
| BS EN 14086:2003 试验 |
Paper and board - Measurement of specular gloss - 45 ° gloss with a parallel beam, DIN method
反射计值 指示器 |
2003-04-16 英国标准学会 |
| BS EN ISO 8254-1:2009 试验 |
纸和纸板.镜面光泽度的测定.用TAPPI方法,会聚光束75°角测定光泽度 Paper and board - Measurement of specular gloss - 75 degree gloss with a converging beam, TAPPI method
光泽 反射计值 |
2009-04-30 英国标准学会 |
| BS EN ISO 8781-3:1995(2000) 试验 |
颜料和增量剂 分散特性的评估方法 第3部分:光泽度变化的评估 Pigments and extenders — Methods of assessment of dispersion characteristics — Part 3 : Assessment from the change in gloss
|
2000-01-01 英国标准学会 |
| CY/T 148-2016 规范 |
Quality requirements and inspection methods for polymethyl methacrylate (PMMA) mirror decorative panels
|
2016-07-31 行业标准-新闻出版 |
| DANSK DS/ISO/TS 20791-3:2023 |
Photography – Photographic reflection prints – Part 3: Evaluation of glossiness
光泽度 图像清晰度 |
2023-06-12 丹麦标准化协会 |
| DIN EN ISO 7668:2011 试验 |
阳极氧化铝和铝合金.20°,45°,60°或85°角的镜面反射率和镜面光泽的测量(ISO 7668-2010).德文版本EN ISO 7668-2010 Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2010); German version EN ISO 7668:2010
|
2011-03 德国标准化学会 |
| DIN EN ISO 7668:2021-11 试验标准 |
铝及其合金的阳极氧化 20°、45°、60°或85°角度下阳极氧化涂层的镜面反射率和镜面光泽度的测量 Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021); German version EN ISO 7668:2021
阳极氧化涂层 |
2021-11 德国标准化学会 |
| DIN EN ISO 8254-1:2009-09 试验 |
纸和纸板 镜面光泽度的测量 第1部分:使用会聚光束的 75 度光泽度 TAPPI 方法 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009); German version EN ISO 8254-1:2009
光泽 反射计 |
2009-09 德国标准化学会 |
| EN 14086:2003 试验 |
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
光泽度 反射计值 |
2003-01-01 欧洲标准化委员会 |
| GB/T 21867.3-2008 试验 |
颜料和体质颜料.分散性的评定方法.第3部分:由光泽的变化进行评定 Pigments and extenders.Methods of assessment of dispersion characteristics.Part 3:Assessment from the change in gloss
分散性 |
2008-05-14 国家市场监督管理总局 |
| GB/T 4893.6-2013 试验 |
Test of surface coatings of furniture.Part 6:Determination of gloss value
|
2013-10-10 国家市场监督管理总局 |
| GB/T 9754-2007 试验/规范 |
色漆和清漆 不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
|
2007-09-11 国家市场监督管理总局 |
| ISO 8254-1:2009 试验 |
纸和纸板.抛光光泽度的测量.第1部分:用汇聚光束的75°光泽度,TAPPI法 Paper and board - Measurement of specular gloss - Part 1: 75° gloss with a converging beam, TAPPI method
|
2009-02 国际标准化组织 |
| ISO 8254-3:2004 试验 |
纸和纸板.光泽度的测量.第3部分:用会聚光束的20?光泽度的TAPPI法 Paper and board - Measurement of specular gloss - Part 3: 20° gloss with a converging beam, TAPPI method
漫反射 |
2004-11 国际标准化组织 |
| ISO 8781-3 试验标准 |
颜料和填料.分散特性的评定方法.第3部分:通过光泽度变化进行评定 Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss
分散 |
国际标准化组织 |
| ISO/TS 20791-3:2023 规范 |
Photography — Photographic reflection prints — Part 3: Evaluation of glossiness
光泽度 图像清晰度 |
2023-06 国际标准化组织 |
| JIS K 5600-4-7:1999 试验标准 |
Testing methods for paints -- Part 4: Visual characteristics of film -- Section 7: Specular gloss
反射计 漆膜 |
1999-04-20 日本工业标准调查会 |
| LST EN 14086:2003 试验 |
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
反射计值 指示器 |
2003-12-29 |
| LST EN ISO 7668:2021 试验 |
铝及其合金的阳极氧化 20°、45°、60°或85°角下阳极氧化涂层镜面反射率和镜面光泽度的测量 (ISO 7668:2021) Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
镜面反射率 |
2021-11-15 立陶宛标准局 |
| LST EN ISO 8254-2:2016 试验 |
纸和纸板 镜面光泽度测定 第1部分:按75度角定向平行光束测量的光泽度 DIN方法(ISO 8254-2:2016) Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
反射计值 指示器 |
2016-12-12 立陶宛标准局 |
| MS 1215-1:2012 试验 |
木家具涂层测试方法 第1部分:通过测量镜面光泽评估眩光(第一次修订) Methods of test for finishes on wooden furniture - Part 1: Assessment of glare by measurement of specular gloss (First revision)
光泽度计 测试表面 |
2019-01-08 马来西亚标准 |
| PD ISO/TS 20791-3:2023 试验标准 |
Photography. Photographic reflection prints. Evaluation of glossiness
光泽度 图像清晰度 |
2023-06-16 英国标准学会 |
| SS-EN 12373-11:2000 试验 |
铝和铝合金 阳极氧化 第11部分:20?、45?、60?或85?角度下阳极氧化涂层的镜面反射率和镜面光泽度的测量 Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20?, 45?, 60? or 85?
镜面反射率 阳极氧化铝 |
2000 瑞典标准研究所 |
| SS-EN 14086:2003 试验 |
纸和纸板 镜面光泽度的测量 平行光束45°光泽度,DIN方法 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
反射计值 指示器 |
2003 瑞典标准研究所 |
| SS-EN ISO 8254-1:2003 试验 |
纸和纸板 镜面光泽度的测量 第1部分:会聚光束75°光泽度 TAPPI法(ISO 8254-1:1999) Paper and board - Measurement of specular gloss - Part 1: 75° gloss with converging beam, TAPPI method (ISO 8254-1:1999)
光泽 镜面反射 |
2003 瑞典标准研究所 |
| SS-EN ISO 8254-1:2009 试验 |
纸和纸板 光泽度的测定 第1部分:75°光泽 聚束光法 TAPPI 方法(ISO 8254-1:2009) Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
反射计值 |
2009 瑞典标准研究所 |
| UNE-EN ISO 8781-3:1996 试验 |
颜料和增量剂 分散特性的评估方法 第3部分:光泽度变化的评估 (ISO 8781-3:1990) PIGMENTS AND EXTENDERS. METHODS OF ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 3: ASSESSMENT FROM THE CHANGE IN GLOSS. (ISO 8781-3:1990).
|
1996-05-24 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-02 08:17