美利体育登录入口官网

ASME 锅炉和压力容器规范，第 VIII 节，第3部分，示例问题手册

ASME Boiler and Pressure Vessel Code, Section VIII, Division 3, Example Problem Manual

压力容器及相关部件用铁素体/奥氏体（双相）不锈钢锻件标准规范

Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

不锈钢棒材、钢坯、型材和锻件的一般要求标准规范

Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings

压力容器用高强度调质低合金钢锻件的标准规范

Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

铝和铝合金锻件 手工锻件和轧制环锻件的标准规范

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

外壳植入物用35钴-35镍-20铬-10钼合金锻件的标准规格 (UNS R30035)

Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

航空航天系列 镍-铬-钛-铝耐热合金坯料、棒材、锻件和零件的规范（镍基、Cr 19.5、Ti 2.2、Al 1.4）

AEROSPACE SERIES Speci?cation for nickel - chromium - titanium - aluminium heat - resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)

一般工程用敞口钢模锻件.一般要求

Open steel die forgings for general engineering purposes. General requirements

航空航天系列 钛合金TI-P64001 固溶处理和老化 锻件 深度≤75毫米

Aerospace series. Titanium alloy TI-P64001. Solution treated and aged. Forgings. De ≤ 75 mm

航空航天系列.耐热合金钢.锻轧材.技术规格.第006部分:预制产品和锻造件

Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Part 006: Pre-production and production forgings

一般工程用开模钢锻件 第 1 部分：一般要求

Open die steel forgings for general engineering purposes - Part 1: General requirements

一般工程用开模钢锻件 第 1 部分：一般要求

Open die steel forgings for general engineering purposes - Part 1: General requirements; German version EN 10250-1:2022

热锻、温锻或冷锻 交货前的修理条件

Hot, warm or cold forging - Repair conditions prior to delivery; German version EN 10360:2015

吊索用部件 安全性 第1部分:8级锻制钢部件

Components for slings - Safety - Part 1: Forged steel components, Grade 8; German version EN 1677-1:2000+A1:2008

钢FE-PA13技术规范

Technical specification for steel FE-PA13

航空航天系列 钢 FE-PM 1507（X1CrNiMoAlTi12-11-2） 真空感应熔炼和自耗电极重熔 固溶处理和沉淀硬化 锻件 a或D ≤ 200 mm Rm ≥ 1 520 MPa

Aerospace series — Steel FE-PM 1507 (X1CrNiMoAlTi12-11-2) — Vacuum induction melted and consumable electrode remelted — Solution treated and precipitation treated — Forgings — a or D ≤ 200 mm — Rm ≥ 1 520 MPa

自由锻造钢锻件 通用技术条件 第1部分：通用要求

Open die steel forgings for general engineering purposes - Part 1: General requirements

航空系列 耐热合金 NI-PH3601 (NiCr22Mo9Nb) 固溶处理 锻件 De ≤ 200 mm

Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm

一般工程用开模钢锻件 第1部分：一般要求

Open die steel forgings for general engineering purposes - Part 1 : general requirements

通用钢锻件 - 第 1 部分：一般要求

Steel forgings for general purposes - Part 1: General requirements

铝合金锻件和轧制或锻造环和锻坯 1.0Mg 0.60Si 0.28Cu 0.20Cr（6061 T4）固溶热处理和自然时效（UNS A96061）

Aluminum Alloy Forgings and Rolled or Forged Rings and Forging Stock 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged (UNS A96061)

锻件 镁合金 2.0Th 0.78Mn（HM21A T5）沉淀热处理（UNS M13210）

Forgings@ Magnesium Alloy 2.0Th - 0.78Mn (HM21A - T5) Precipitation Heat Treated (UNS M13210)

铝合金 手工锻件 7.5Zn 1.6Cu 1.5Mg 0.12Zr (7085-T7452) 固溶热处理、压缩应力消除和过时效

Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged

钛合金，锻件 5Al 2.5Sn 退火，110 ksi（758 MPa）屈服强度

Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength

钛合金锻件 8Al 1Mo 1V 固溶热处理和稳定化

Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized

钛合金锻件 8Al 1Mo 1V 固溶热处理和稳定化

Titanium Alloy Forgings, 8Al - 1Mo - 1V, Solution Heat Treated and Stabilized

弯头，90°，缩径和标准，缩径，无喇叭口

ELBOW, 90°, REDUCER AND STANDARD, REDUCED BODY, FLARELESS

一般工程用途的开式模钢锻件 第1部分：一般要求

Open die steel forgings for general engineering purposes - Part 1: General requirements

一般工程用开模钢锻件 第1部分：一般要求

Open die steel forgings for general engineering purposes - Part 1: General requirements

航空航天系列 钢 X105CrMo17(1.4125)淬火和回火 手工锻件和模锻件 De = 150mm

Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De = 150 mm (Endorsed by AENOR in September of 2014.)

航空航天系列 钢 30CrNiMo8(1.6580)1100 MPa <= Rm <= 1300 MPa 锻件 De <= 100mm

Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa <= Rm <= 1 300 MPa - Forgings - De <= 100 mm (Endorsed by Asociación Espa?ola de Normalización in January of 2020.)

航空航天系列 钛合金 Ti-4Al-4Mo-2Sn 固溶处理和时效 锻件 De <= 150mm

Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De <= 150 mm (Endorsed by AENOR in December of 2012.)

航空航天系列 钢 FE-PM1506(X1CrNiMoAlTi12-10-2)真空感应熔炼和自耗电极重熔 固溶处理和沉淀处理 锻件 a 或 D <= 200mm Rm >= 1400 MPa

Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm >= 1400 MPa (Endorsed by AENOR in February of 2011.)

一般工程用途的开式模钢锻件 第1部分：一般要求

Open die steel forgings for general engineering purposes - Part 1: General requirements